Instructions

ManualsBrandssoundmaster ManualsAudiosoundmaster SCD5800BL Radio CD player FM FM, USB, Tape, Radio cassette player Incl. microphone Blue

SCD5800 / English Instruction Manual

CASSETTE

Playing Cassettes

1. Select the Tape mode with the “STANDBY / FUNCTION” button, until “TAPE” is shown.

2. Press the “STOP/EJECT” button to open the cassette compartment.

3. Insert a recorded audiocassette into the compartment with the tape opening facing upwards

and the side you wish to listen to facing the front (full spool to the right). Then close the

cassette compartment again.

4. Press the “PLAY” button to listen to the tape.

5. With the “STOP/EJECT” button you can stop play-back.

6. Wind the tape forwards or backwards if necessary in the direction of the arrow keys.

7. Always press the “STOP/EJECT” key when changing the direction or stopping the tape.

This prevents damage to the machine and the tape.

8. If the “STOP/EJECT” button is pressed again the flap of the cassette compartment opens.

9. In order to interrupt playback briefly, press the “PAUSE” button. Pressing again continues

playback.

Cassette Record

1. Insert an audio cassette into the cassette compartment. Make sure the cassette write-

protect has not been removed.

2. Select the function mode you want to record from and start playback if necessary.

3. Press the "RECORD" button on the cassette section to start recording.

4. If you want to stop recording, press the "PAUSE" button on the cassette part. To resume

recording, press the button again.

5. To stop recording, press the "STOP / EJECT" button on the cassette section.

MICROPHONE

1. Plug the microphone into the "MIC" socket on the back of the device.

2. Turn on the microphone.

3. Pressing the "VOLUME-" and "VOLUME +" buttons will change the volume of the selected

source as well as the microphone volume.

4. If you press the "RECORD" button on the cassette part, the recording starts.

Note: In cassette mode, the microphone is not useable.

HEADPHONE

To listen to music privately, use headphones with a 3.5 stereo jack plug and connect to the

headphones socket on the back of the system. The speakers will then be muted.

DISCO LIGHT EFFECT

Press the "LIGHT" button to turn the disco light effect on or off.

TECHNICAL SPECIFICATION

Power supply

AC 230V ~ 50Hz

Battery supply

6x LR14, UM-2 (“C” size) 1.5 V

Frequency range FM

87.5 – 108MHz

Preset station

30 FM

Audio output power

2x 1.5W RMS

Technical changes and misprints reserved.

Duplication only with the permission of Woerlein GmbH