Instructions

SCD5800 / English Instruction Manual

USB

This device has been developed in line with the latest technical advances in the USB field. The

wide range of different USB storage devices of all types which are currently on the market,

unfortunately do not allow us to guarantee full compatibility with all USB storage devices. For

this reason, in rare cases there may be problems in playing back files from USB storage

devices. This is not a malfunction of the device.

1. Select the USB mode with the “STANDBY / FUNCTION” button, until “USB” is shown in the

display.

2. Connect a USB storage device directly into the port. The playback will automatically start

after a few seconds.

For operation, please refer to the section “CONTROL BUTTONS”.

NOTE:

➢ Always directly connect a USB storage medium to the USB port to prevent any

malfunctions.

➢ The USB port is not designed for charging external devices.

CAUTION:

Switch the device to a different operating mode before you remove the USB storage device.

CONTROL BUTTONS

NOTE:

Depending on the player, not all features may be supported.

PLAY / PAUSE / CLOCK

➢ You can briefly interrupt and resume playback using this button. The display shows the

elapsed playback time flashing. Pressing again continues playback.

➢ Press and hold this button during operation to briefly display the current time.

SKIP+ & SKIP-

With “SKIP+ / TUNING+” button you can jump to the next or previous track etc.

If the button is kept pressed down, the machine starts to search through the tracks.

The “SKIP- / TUNING-” button can be used as follows:

Press once = This starts the current track again from the beginning.

Press twice = This jumps back to the previous track.

STOP

The playback is stopped.

SCAN / PROG

In stop mode for programming any order of tracks (see the section on “Programmed Play”).