Operation Manual

BASIC OPERATION
4
ENGLISH
Switching on/off: Save energy
Whether you are using mains or battery supply,
to avoid unnecessary energy consumption
always adjust the
ON/OFF switch
to OFF.
1. To select your sound source, adjust the
FUNCTION selector to RAIDO, TAPE or
CD/ USB.
2. Adjust the sound with
VOLUME.
3. To switch off the power, set the ON/OFF
switch to OFF position.
Radio reception
1. Turn the function selector to RADIO.
2. Turn the BAND selector to a desired setting
(FM ST., FM or AM)
3. Rotate the T
UNING control to find the desired
stations, the frequency will show on display.
4. If the BAND selector is set to FM ST. and a
station with stereo broadcast is received
accurately.
When you have finished listening, slide the
ON/OFF switch to the OFF position.
− If FM reception is weak, stereo may be indi-
cated but the sound may not be good. In this
case, set the
BAND selector to FM to receive
in mono only.
− For FM, pull out the telescopic antenna.
Incline and turn the antenna. Reduce its
length if the signal is too strong (very close
to a transmitter).
− For AM the set is provided with a built-in
antenna so the telescopic antenna is not
needed. Direct the antenna by turning the set
itself.
PLAYING A CASSETTE
1. Select TAPE source.
2. Press
STOP/EJECT to open the cassette door.
3. Insert a cassette and close the cassette door.
4. Press
PLAY to start playback.
5. To interrupt playback, press
PAUSE. To resume, press PAUSE again.
6. by pressing
FF or REW on the set, fast winding of the tape is possible in both directions.
7. To stop the tape, press
STOP/EJECT.
The keys are automatically released at the end of the tape, except if
PAUSE has been
activated.