Instructions

SCD7800 / English Instruction Manual
4
• Prune:
It may be that you can no longer receive some stations after a station scan or change of
location. With this function you can delete these stations from the reception list. Select
“YES” and confirm with the “PLAY / PAUSE / CLOCK / ENTER” button.
• System
See under “SYSTEM SETTINGS”.
FM
1. Press repeatedly the “STANDBY / FUNCTION” button, until “FM” is shown in the display.
2. Extend completely the telescopic antenna. Change its position to improve the reception.
3. There are two options to search for and preset radio stations.
• Automatic scan:
Important! Any preset radio stations will be overridden.
Press and hold the "SCAN / MODE" button for approx. 3 seconds. The system scans the
complete frequency band for radio stations. Any stations found will be preset from lowest to
highest frequency.
• Manual scan for audio stations:
Briefly press the “SKIP - / TUNING -” or “SKIP + / TUNING +” buttons, until you have found
the radio station which you are looking for. If you keep one of the buttons pressed down, the
device will search to the previous, respectively next radio station.
Preset store
Is the same as in DAB mode.
Preset recall
Is the same as in DAB mode.
Info display
Press repeatedly the “INFO / SNOOZE” button to show the following FM information:
Radio text, PTY, name, mono or stereo broadcast, time, date.
FM Menu
To enter the FM menu, press the “STOP / MENU” button. Select with the “SKIP - / TUNING -” or
“SKIP + / TUNING +” one of the following settings and press “PLAY / PAUSE / CLOCK /
ENTER”:
• Scan setting: Select the desired option for automatic station search.
- All stations: Search for all stations that can be received. In this case, station search also
stops for weak stations.
- Strong stations only: Only clear stations are searched.
• Audio setting: Select the MONO or STEREO for FM reception.