Instructions

SCD7800 / English Instruction Manual
6
Audio CD:
Press once = the normal play mode. The display will show “Normal”.
Press twice = the current track is repeated continuously. The display will show “Repeat One”.
Press three times = the whole CD is played continuously. The display will show “Repeat All”.
Press four times = all tracks will be played in random order. The display will show “Random”.
Press five times = back to the normal play mode.
MP3-CD:
Press once = the normal play mode. The display will show “Normal”.
Press twice = the current track is repeated continuously. The display will show “Repeat One”.
Press three times = the selected folder is repeated continuously. The display will show “Repeat
Folder”.
Press four times = the whole CD is played continuously. The display will show “Repeat All”.
Press five times = all tracks will be played in random order. The display will show “Random”.
Press six times = back to the normal play mode.
Programmed Play
This can be used to program any desired sequence of tracks.
1. Press the “STOP / MENU button.
2. Press the "SCAN / MODE" button. “P_01” flash in the display (P_01 means the program
number).
3. Use the “SKIP + / TUNING +” or SKIP - / TUNING -” buttons to select the desired track and
press the "SCAN / MODE" button again. The display P_01 change to P_02.
4. Select the next track with the “SKIP + / TUNING +or SKIP - / TUNING -” buttons and
press the "SCAN / MODE" button again. Repeat the procedure until all the desired tracks
are selected.
NOTE:
Once the storage capacity of the tracks to be programmed has been reached PROGFULL
will show in the display.
5. Press the PLAY / PAUSE / CLOCK / ENTERbutton to start the programmed playback.
The upper-left of the display will show MEM.
6. Press once the STOP / MENUbutton to stop the playback while retaining the program.
7. To play the programmed back again, press the PLAY / PAUSE / CLOCK / ENTER button.
8. To delete the program, press the “STOP / MENU button twice. The notification “MEM” will
disappear.