Manualshelf

Instructions

ManualsBrandssoundmaster ManualsAudioRadio cassette player DAB+, FM AUX, CD, DAB+, Tape, FM, USB Alarm clock Green
21222324252627282930
SCD7800 / English Instruction Manual
8
AUX IN
Via this socket you can also hear the sound of other playback devices such as MP3 players, CD
players etc. through the loudspeakers.
1. Please connect the external device with a 3.5mm stereo jack plug to the AUX-IN socket at
the back side of the unit.
2. Press repeatedly the “STANDBY / FUNCTION” button, until “Aux” is shown in the display.
3. You will hear the sound playback from the external device through the loudspeakers. You
may adjust the volume with volume buttons buttons. The CD buttons are not functional.
4. For the remaining procedure please see the operating instructions of the external sound
source.
Note:
Adjust the volume of the external device to a comfortable level.
ALARM
Setting the alarm time
The system must be in standby mode in order to set the alarm.
You have the option of setting two alarm times. Proceed as follows:
1. Press the “VOLUME+ / ALARM 1” button for about 3 seconds. The hours of the currently
set alarm time will start to flash.
2. Perform the settings with the “SKIP + / TUNING +” or “SKIP - / TUNING -” buttons.
3. Press the “VOLUME+ / ALARM 1” button to confirm. The minutes will start to flash.
4. Perform the settings with “SKIP + / TUNING +” or “SKIP - / TUNING -” button.
5. Press the “VOLUME+ / ALARM 1” button to confirm. Then choose how you would like to be
woken up. Perform the settings with the “SKIP + / TUNING +” or “SKIP - / TUNING -”
buttons. Press the “VOLUME+ / ALARM 1” to confirm.
• FM:
As soon as the set alarm time has been reached, the radio will turn on in FM mode.
• DAB:
As soon as the set alarm time has been reached, the radio will turn on in CD mode.
• CD:
As soon as the set alarm time has been reached, the device will turn on in CD mode.
The inserted CD will be played from the first track.
• USB:
As soon as the set alarm time has been reached, the device will turn on in USB mode.
The tracks of the connected storage device will be played from the first track.
• BUZZ:
A signal tone will sound when reaching the alarm time.
6. If DAB or FM is selected as wake up function, you must select a stored preset station 1-30.
7. Finally, press the “SKIP + / TUNING +” or “SKIP - / TUNING -” buttons to set the alarm
volume. Press the “VOLUME+ / ALARM 1” to confirm.
To set the second alarm time, repeat each of the above steps with the “VOLUME- / ALARM 2”
button.