Instructions

SCD7800 / English Instruction Manual
9
Snooze
The automatically set alarm function can be switched off for 9 minutes with the “INFO /
SNOOZE” button.
Deactivate the sounding wake up tone
Press the “VOLUME+ / ALARM 1” or “VOLUME- / ALARM 2” button to deactivate the sounding
alarm tone.
Activate / Deactivate the alarm
Press in standby mode repeatedly the “VOLUME+ / ALARM 1” or “VOLUME- / ALARM 2” and
choose “Alarm off.
Press in standby mode repeatedly the “VOLUME+ / ALARM 1” or “VOLUME- / ALARM 2” and
choose the desired wake up source.
SETTING CLOCK AND DATE
The system must be in standby mode in order to set the clock.
1. Press and hold the “PLAY / PAUSE / CLOCK / ENTER” button for approx. 2 seconds.
2. Use the “SKIP + / TUNING +” or “SKIP - / TUNING -” buttons to set the time format “12 /
24hr” and press the “PLAY / PAUSE / CLOCK / ENTER” button to confirm time format. Now
the hour digits start flashing.
3. Use the “SKIP + / TUNING +” or “SKIP - / TUNING -” buttons to set the hours and press the
“PLAY / PAUSE / CLOCK / ENTER” button to confirm. Now the minutes digits flashing.
4. Use the “SKIP + / TUNING +” or “SKIP - / TUNING -” buttons to set the minutes and press
the “PLAY / PAUSE / CLOCK / ENTER” button to confirm. Now the display shows the date.
5. Set in the same way the date.
Note:
Press and hold the “PLAY / PAUSE / CLOCK / ENTER” button during operation order to briefly
display the current time.
HEADPHONE
To listen to music privately, use headphones with a 3.5mm stereo jack plug and connect them to
the headphones socket on the back of the system. The speakers will then be muted.