ENGLISH Hersteller Wörlein GmbH Gewerbestrasse 12 D 90556 Cadolzburg GERMANY Tel.: +49 9103/71670 Fax.: +49 9103/716712 Email. info@woerlein.com Web: www.woerlein.
CONTROLS & CONNEC TIONS FRONT SIDE AND BACK 1. Volume knob 2. Mode button 3. Standby button 4. Preset/ Prog button 5. LCD Display 6. Cassette button 7. Cassette door 8. Scan/ Play pause button 9. Menu button 10. Info/ Stop button 11. Tuning/ Select, 12. Function selector 13. Headphone jack 14. Aux-in jack 15. USB jack 16. Battery compartment 17.
GET TING STARTED DAB/FM AERIAL Before using your radio for DAB or FM reception, pull out the telescopic antenna. You may need to adjust the position of the telescopic antenna for maxing signal strength. CONNEC TING POWER Before connecting the power, check that the mains voltage on the rating plate is the same as the voltage in your area. · Plug the AC cord into the AC socket at the back of the unit. · Plug the VDE plug into the wall socket.
INTIAL SCAN When this unit is switched on for the first time at TUNER mode, then press MODE button switching to DAB, the scanning display will be shown while the scanning process takes place: The radio scans all usable stations (full scan) and stores them alphanumerically -1 Radio, 2 Radio, AA Radio, AB Radio…The initial scan will take a few minutes. After the scan, the clock will be set and the radio will play the name of the first station in the sequence.
SW VERSION: This option will display the version number of the control software currently installed in your radio. This will be helpful to a technician who is servicing this product. When unit during Standby mode, press MENU button then turn the TUNING knob to select SW Version. Press TUNING/ SELECT knob to confirm. Display will show the current software version.
DAB SCANNING RE-SCANNING STATIONS FOR DAB When first used, your radio scanned the DAB band for available stations. The station services found were then stored in your system's memory. You can re -scan the band at any time if you move to a different area or just to refresh the stored list of available stations. To scan for DAB stations manually: · Set the function selector to TUNER, then press MODE button to select DAB mode. · Press the SCAN button on the front panel.
DLS (Dynamic Label Segment): This is a scrolling message giving real-time information-song titles, news headlines, etc. PROGRAMME TYPE: This describes the style of the program being broadcast. ENSEMBLE NAME: DAB Digital radio stations are broadcast in multiplexes. Each multiplex is a bundle of radio stations transmitted in a signal frequency. There are national and local multiplexes; local ones contain stations specific to your area.
LISTENING TO FM RADIO This unit can also receive FM band radio stations and display RDS data (where broadcast). To change to the FM band · Set the function selector to TUNER, press MODE button to select FM mode. Tune to FM stations · Press the SCAN button to search for the next station in the band. · Turn the TUNING knob for manual tune. The radio will search and the tuning frequency will be displayed whilst searching. When a usable station is detected the radio will stop tuning and play the station.
LISTENING TO A CD LOADING DISCS This player can playback CD and MP3 audio format. To select CD operation: • Set the function selector to CD/ USB position, press the MODE button to select CD mode. Loading a disc: • Lift up the CD Door on top of the unit slowly. • Gently place a disc on the center spindle with the label side upward. • Once in place, press the center of the disc until it clicks into place on the turntable. • Close the CD door. After a few seconds the disc will read and the disc data.
CD PLAYBACK, PAUSE: • Load the CD. • Press the SCAN / button to star t the CD playing • When a CD is playing, pressing the SCAN / button at any time will pause playback. Press the button again to re -star t play. Selecting tracks: • Turn the TUNING knob , briefly to select the previous or next track from the disc. CD REPEAT AND RANDOM REPEAT AND SHUFFLE FUNC TIONS You can repeat a single track, the whole disc or select random to play the tracks in a random sequence.
LISTENING TO AN USB 1. Set the FUNCTION selector to CD/USB. 2. Press the MODE button until display show USB. 3. Press button to playback the music. 4. The operation procedures are the same as CD playback. Refer to general control for details. NOTE: - Compatible storage device (up to 32GB) . - Please do NOT use a USB extension cable to connect your USB flash drive. Such cable can pick up additional interference which can corrupt the data flow.
CASSETTE PLAY 1. PAUSE BUTTON Pauses playback 2. STOP/ EJECT Button Stops playback Opens the cassette door 3. 4. F.FED Button Fast forwards playback REW Button Fast reverses playback 5. PLAY button Plays back cassette Cassette Playback 1. Set the FUNCTION selector to TAPE position. 2. Press the button to open the cassette compartment door, and insert a cassette and close the cassette compartment door. 3. Press the button to start playback. button. To resume, press the button again. 4.
CARE AND MAINTENANCE CARE AND CLEANING All care and cleaning operations should be carried out with the unit unplugged from the mains power. The surface of the unit can be cleaned with a barely damp cloth and then dried carefully. Never use abrasives, abrasive cloths or chemical solvents. Cleaning the Tape Deck Use a cotton bud slightly moistened with alcohol or a special head cleaning fluid to clean the deck. 1. Press the button to open the cassette compartment. 2.
Care and maintenance Compact Disc Care To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. Finger prints and dust should be carefully wiped off the disc’s recorded surface with a soft cloth. Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris, so gently wiping with a soft cloth should remove most particles. Wipe in a straight line from the inside to the outside of the disc.
TROUBLESHOOTING Poor quality radio reception The aerial signal may not be adequate. Try repositioning the aerial while watching the signal strength. Signal strength can be displayed by tuning to a DAB station. Press the INFO. button then turn the TUNING knob, . PROBLEM No sound / power CD display does not function properly / No reaction to operation of any of the controls CAUSE / • Volume not adjusted. AdjustSOLUTI the volume. • Mains cable not securely connected. Connect the mains cable ON properly.
WARRANTY & SPECIFICATIONS SPECIFICATIONS Supply voltage, current : AC 230V ~ 50Hz Power consumption . . . : 16W Batter y supply. . . . . . . . . . : DC 9V (6 x “C ” SIZE R14). Output power. . . . . . . . . . .: 2 x 1.2W Frequency range. . . . . . . .: 174.928-239.200 MHz (DAB) 87.5-108 MHz (FM) Dimensions (WxDxH) . . .: 300 x 295 x 134 mm Weight. . . . . . . . . . . . . . . . . . : 1.