Deutsch English Français Nederlands Espańol UR 2080 DE 1
LOCATION OF CONTROLS AND INDICATORS Front view Bottom view 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. AUX IN, ON Button Timer Indicator Timer Start/Stop Button Timer Adjust –/+ Buttons CD Door CD Tray Open / Close Button CD Stop / Off Button CD ON, Play / Pause Button AUX IN Jack Remote Sensor Radio Preset Up / Down Buttons ( / ) 12. Radio On / Band Button 13. LCD Display 14. 15. 16. 17. 18. 19. 20. 21. 22.
Remote control 1. 2. Volume - / + Button CD : Skip / Search Previous Radio : Tuning – 3. CD : Skip / Search Next Radio : Tuning + 4. Radio Preset Up / Down Button ( / ) 5. Radio On / Band Button 6. AUX IN, ON Button 7. Mute Button 8. CD ON, Play / Pause Button 9. CD Stop / Off Button 10. Magnetic Plate 11. Battery Door LOADING BATTERIES 1. Remove the battery compartment cover. 2. Insert 2 "AAA" size batteries (not included) as indicated by the polarity marking.
PREPARATION FOR USE INSTALLING THE UNIT UNDER A CABINET 1. Mark the position of the 3 holes by using the supplied template. Use a drill to make the holes. 2. When the cabinet door overhangs the shelf and obstructs the unit, you can adjust the unit/shelf height. 3. Install the unit with the supplied mounting screws. Caution: Please read the following before installing the unit. • Since the unit is heavy, be careful when installing the unit.
MAIN POWER SUPPLY - Check that the power voltage as shown on the type plate (at the base of the set) corresponds to your local power voltage. If it does not, consult your dealer or service organization. Connect the power cord to the wall outlet, for AC power supply. As soon as you insert the power plug into the wall outlet, the display time will flash and show . Please see below how to set the correct time. POWER FAILURE If power failure occurs, the unit will switch off.
COMPACT DISC OPERATION TIPS ON HANDLING COMPACT DISCS Discs should be handled with care. Dirt, dust, scratches and warps can cause the sound to skip during play deteriorating the sound quality. The following guidelines will help ensure maximum enjoyment from your CD collection: • Only use discs bearing the audio compact disc identification logo. • During non-use periods, always store CDs in their protective case. • To keep discs clean, always handle by the edge.
CD PLAYER OPERATION 1. Press PLAY/PAUSE button once to turn on CD power, "CD" will light up on the LCD. 2. To open the CD tray, press OPEN/CLOSE button once. - NOTE : Pressing the OPEN/CLOSE button at any time will automatically switch the unit to the CD function and open the CD tray EXCEPT when the timer alarm is sounding. 3. Place a compact disc on the tray with label side facing upward. 4. To close the CD compartment, push OPEN/CLOSE button once.
CD MODE/PROGRAM REPEAT 1 - During CD playback, press CD MODE / PROGRAM button once. The REPEAT 1 indicator will come on and the current track will play repeatedly. REPEAT ALL - During CD playback, press CD MODE / PROGRAM button twice. The REPEAT ALL indicator will come on and all tracks will play repeatedly. RANDOM PLAY - During CD playback, press CD MODE / PROGRAM button three times. The RDM indicator will flash and tracks will begin playing in random order. PROGRAM Programming track number at STOP mode.
RADIO OPERATION 1. Press RADIO ON/BAND button once to turn on radio power, RADIO will light up on the LCD. 2. Press RADIO ON/BAND button again to select radio band. 3. Press the TUNE/TIME button + or – momentarily (less than 0.5 sec.) to step up or down the receiving frequency in order to select the desired station. 4. For auto tuning, keep pressing the TUNE/TIME button + or – (more than 0.5 sec.) until the displayed frequency starts to change, then release the button.
• - Timer can be set and operated in OFF mode or CD PLAY / RADIO ON / AUX IN mode. In OFF mode: When the desired time has elapsed, a beep sound will be heard and the timer indicator will flash for about 60 minutes. This alert can be stopped at any time by pressing the TIMER button once. In CD PLAY / RADIO ON / AUX IN mode: When the desired time has elapsed, a beep sound will be heard and the TIMER indicator will flash for about 60 minutes.