Instructions

UR2016 / English Instruction Manual
4
ACTIVATE LED LAMP
Press the “Light” button once, the lamp will lightning. Press the button again to switch off the
lamp. To save energy, the lamp will automatically switch off after 120 minutes.
SETUP
Press in standby mode the “Menu” button to enter into the setup mode and the “ “ or “ ”
button to select the following settings. Press “Enter” to confirm the selection. To leave the setup
menu, press the “Menu” button or wait for about 10 seconds.
1. Set EQ (Equalizer)
The unit has 6 preset equalizer settings and one custom setting.
1. When you have entered the EQ setting, press the “ “ or “ ” button to select one of
the preset EQ (FLAT, ROCK, CLASSIC, JAZZ, POP, BASS) or the custom setting
(CUSTOM) and “Enter” to confirm the selection.
2. If you have chosen the “CUSTOM” setting, now you can select the setting for “BASS” or
“TREBLE” with the “ “ or “ ” button and press “Enter” to confirm. To adjust the
setting, press the “ “ or “ ” button and confirm with “Enter”.
2. Set the clock and date
1. When “TIME SET” is shown in the display, press the “Enter” button to enter the clock,
date, update and format settings.
2. Press the “ “ or “ ” button to select “CLOCK”, “SET DATE”, “UPDATE” or “12/24H”
and press “Enter” to confirm.
CLOCK: Adjust the flashing digits (hour, minute) with the “ “ or “ ” button and
confirm each with the “Enter” button.
SET DATE: Adjust the flashing digits (day, month, year) with the “ “ or “ ” button
and confirm each with the “Enter” button.
UPDATE: If “F RADIO” is shown in the display, the device will automatically update the
clock from DAB or FM mode (When RDS is available!). If “NOUPDATE” is shown, the
device will running without automatically update. Select with the “ “ or “ ” button and
confirm with the “Enter” button.
12/24H: Set the clock display in “12” or “24” hour format. Select with the “ “ or “ ”
button the format and confirm with the “Enter” button.
3. Set SDA timer
SDA means “Special Date Alert”. It´s provide to remember favorite days. There are 10 days
for input (SDA 0-9)
1. Select “SET SDA” with “ “ or “ ” and press “Enter” to confirm”.
2. Select the SDA timer 0-9 and press “Enter” to confirm. The display show “31.12.2018”
and the first two digits are flashing.
3. Press the “ “ or “ ” button to adjust each input (Date/month/year) and confirm with
the “Enter” button.
4. After finishing the display will show “EQ” again.
5. To adjust another SDA timer please select again “SET SDA” follow the steps 1-3.
6. SDA activate time is at 8.00AM for 10 minutes.
4. Set Alarm
You can set 2 alarm times on this device.
1. Select “ALARM 1” or “ALARM 2” with the “ “ or “ ” button and confirm the selection
with the “Enter”.
2. Adjust the hour with the “ “ or “ ” button and confirm with “Enter”.
3. Adjust the minutes with the “ “ or “ ” button and confirm again with “Enter”.