Operation Manual

MMI of UR2060
2.2.6 Press <Mode> once to go to set the date.
2.5.7 Press other key to start its corresponding function.
2.2.8 When no key has been pressed for 10 seconds, the current setting is confirmed and it
switches to auto-run mode
2.2 Set the date
2.2.1 Press <Mode> once in clock setting mode
2.2.2 The current date goes flashing in the format of DD.MM.YY
2.2.3 Press <UP> or <Down> to change the current setting by 1 day per step.
2.2.4 Press and hold <UP> or <Down> to change the setting in fast mode of 10 days per step. The
day flag will be updated automatically when the date has become steady.
2.2.5 Press <Mode> once to confirm the current setting and it switches to set the SDA.
2.2.6 Press other key to start its corresponding function.
2.2.7 When no key has been pressed for 10 seconds, the current setting is confirmed and it
switches to auto-run automatically.
2.3 Set the SDA
2.3.1 Press <Mode> once in date setting mode
2.3.2 The DATE & ‘SDA 1’ goes flashing alternative
2.3.3 Press <MEM Scan> to select 1-6 SDA which want to set
2.3.4 Press <Up> or <Down> to set the Special Date.
2.3.5 Press <MEM>to enter SDA hour select mode, press again to set the hour.
2.3.6 Press <Timer> to ignore the year
2.3.7 Press <Mode> once the current setting is confirmed and switches to Setting update mode
2.3.8 Press other key to start its corresponding function.
2.3.9 When no key has been pressed for 10 seconds, the current setting is confirmed and it
switches to auto-run mode automatically.
In case of ignore the year the SDA will be active ever year at same date
2.4 Setting update mode
2.4.1 Press <Mode> once in SDA setting mode.
2.4.2 Press <Down> tune off update function , RDS automatic update function will be shut off and
“RDS” mark disappear.
2.4.3 Press <UP> turn on update function, RDS automatic update function becomes active and the
“RDS” mark appear.
2.4.4 Press <Mode> once to confirm the current setting and it switches to Set dimmer
Press other key to start its corresponding function.
2.4.5 When no key has been pressed for 10 seconds, the current setting is confirmed and it
switches to auto-run mode automatically.
2.5 Set dimmer
2.5.1 Press <Mode> for 5 times into dimmer switch mode,
2.5.2 Press <UP> or <DOWN> tune off or tune on dimmer function
Key Press Display Function
Down DIM OFF Dimmer Off
Up DIM ON Dimmer On
2.5.3 Press <Mode|Stop> once to confirm the current setting and it switches to Set dimmer timer.
2.5.4 When no key has been pressed for 10 seconds, the current setting is confirmed and it
5 Of 10
VER:R0