DEUTSCH NEDERLANDS PORTUGUÊS ESPANOL Hersteller Wörlein GmbH Gewerbestrasse 12 D 90556 Cadolzburg GERMANY ENGLISH FRANCAIS ITALANIO Tel.: +49 9103/71670 Fax.: +49 9103/716712 Email. info@woerlein.com Web: www.woerlein.
Dieses Symbol zeigt an, dass im Inneren des Gerätes gefährliche Spannungen vorhanden sind, und einen Stromschlag verursachen können. Dieses Symbol weist auf wichtige Bedienungsund Wartungsanweisungen bezüglich des Geräts hin. Sicherheits- / Umwelt- / Aufstellhinweise • Das Gerät ausnahmslos nur in trockenen Innenräumen betreiben. • Niemals mit Feuchtigkeit in Verbindung bringen • Niemals das Gerät öffnen. STROMSCHLAGGEFAHR ! Dies ist nur Fachpersonal gestattet.
UR220 / Deutsche Bedienungsanleitung BEDIENELEMTENTE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21.
UR220 / Deutsche Bedienungsanleitung FERNBEDIENUNG Die Fernbedienung arbeitet mit einer 3V "Typ CR2025" Lithium-Batterie. Um die Fernbedienung nutzen zu können, entfernen Sie den Isolationsstreifen im Batteriefach. Wenn die Batterie die Fernbedienung nicht mehr Sendet, oder nur noch in unregelmäßigen Abständen, ersetzen Sie die Batterie mit einer 3 Volt Lithiumbatterie des gleichen Typs. 1. Schieben Sie die Batteriehalterung aus der Fernbedienung. (siehe Zeichnung) 2.
UR220 / Deutsche Bedienungsanleitung BEDIENELEMENTE DER FERNBEDIENUNG 1. EIN/AUS ALARM AUS 2. FUNKTIONEN / DISPLAY AUS 3. SNOOZE / SLEEP / DIMMER 4. LICHT EIN/AUS 5. STIMMUNGSLICHT EIN/AUS 6. TEMPERATUR / C-F 7. << / TUNE - / BETWEEN DISPLAY CONTENTS ON-OFF 8. ALARM 1 EINSTELLUNG 9. LAUTSTÄRKE 10. ALARM 2 EINSTELLUNG 11. >> / TUNE + / NAP / DST 12. ZEIT EINSTELLUNG / SPEICHER / SPEICHER+ 13. JAHR/MONAT-TAG 14. LAUTSTÄRKE 15. NATURGERÄUSCHAUSWAHL 16.
UR220 / Deutsche Bedienungsanleitung LED ANZEIGE ZEIT Anzeige PM Anzeige FM Anzeige AUX In Anzeige ALARM 1 Anzeige MONAT Anzeige ALARM 2 Anzeige TAG Anzeige TEMPERATUR Anzeige ERSTE SCHRITTE •Wählen Sie einen geeigneten Platz für das Gerät, wie einen trockenen und Staubfreien Bereich. •Einsetzen der Batterie. Uhr-Einstellung / Stütz-Batterie Das Batteriefach für die Stütz-Batterie befindet sich auf der Geräte Rückseite. (1) Lösen Sie die Batteriefachschraube. (2) Öffnen Sie den Batteriefachdeckel.
UR220 / Deutsche Bedienungsanleitung Netzanschluss Stecken Sie das Netzkabel in eine Netzsteckdose. EINSTELLUNG KALENDER UND UHRZEIT 1. Drücken und halten Sie im Standby Modus die Taste (7)am Hauptgerät oder die Taste (12) auf der Fernbedienung für ca. 2 Sekunden gedrückt, um in den Kalender/ Zeit Einstellungsmodus zu gelangen 2. Die Jahresanzeige wird auf der LED-Anzeige für bis zu 30 Sekunden blinken, bis Sie eine Eingabe gemacht haben. 3.
UR220 / Deutsche Bedienungsanleitung Anzeige EIN / AUS Funktion (deaktiviert die Uhrzeitanzeige im Standby) •Drücken und halten Sie im Standby-Modus die SOURCE-Taste (9) auf dem Gerät oder die Taste SOURCE (2) auf der Fernsteuerung für ca. 3 Sekunden gedrückt. Im Display erscheint "ON" •Nach 15 Sekunden wechselt die Anzeige in den eingestellten Modus. •Drücken Sie eine beliebige Taste, um die Anzeige für weitere 15 Sekunden einzuschalten.
UR220 / Deutsche Bedienungsanleitung RADIO MODUS 1. Schalten Sie das Gerät ein. 2. in der Anzeige erscheint die Frequenzanzeige für etwa 5 Sekunden, und springt dann erneut in den Uhr-Modus zurück. AUTOMATISCHE SUCHE NACH RADIOSENDER Um automatisch nach Sender mit starkem Signal zu suchen, drücken und halten Sie die Tasten (10) oder (11) am Hauptgerät oder die Tasten (7) und (11) auf der Fernsteuerung, bis die Frequenzanzeige auf dem Display zu scannen beginnt.
UR220 / Deutsche Bedienungsanleitung ALARM EINSTELLUNG Sie können zwei Alarmzeiten einstellen. Es stehen 6 verschiedene Alarmoptionen zur Verfügung: Radio + Licht / Radio / Buzzer Licht / Summer / Naturgeräusche + Licht / Naturgeräusche Die Reihenfolge der Einstellung für AL1 und AL2 ist wie folgt: Im Radio-Modus, drücken Sie am Hauptgerät die Alarmeinstellungstasten (12) und (13) oder auf der Fernbedienung die Tasten (8) und (10), um die Alarmzeit anzuzeigen.
UR220 / Deutsche Bedienungsanleitung ALARMEINSTELLUNG ALARM 2(NATURGERÄUSCHE) Normal Time → AL 2 Stunde → AL 2 Minute → AL 2 Wochentag → AL 2 beeper → AL 2 radio →AL 2 Naturgeräusche →(Drücken Sie am Hauptgerät die Tasten (10) und (11), oder auf der Fernbedienung die Tasten (7) und (11), und den Naturgeräusch modus zu wählen) →AL 2 Naturgeräusch Lautstärke →AL 2 Licht → AL 2 Licht Intensität → Normal Zeit Gehen Sie wie folgt vor: 1.
UR220 / Deutsche Bedienungsanleitung Hinweis: • Die Alarmfunktion schaltet sich automatisch nach 30 Minuten aus bis zum nächsten Tag. 7a. Wenn Sie von einen Radiosender geweckt warden möchten, wählen Sie die maximale Alarmlautstärke mit der Einheit (10) und (11) oder mit der Fernbedienung (7) und (11). 8. Drücken Sie am Hauptgerät die die Alarm1 Taste (12) oder auf der Fernbedienung Taste (8) zum Bestätigen. Wählen Sie dann die Lichtintensität (L) für die Alarmfunktion.
UR220 / Deutsche Bedienungsanleitung SLEEP Funktion Der Sleep-Timer ermöglicht es Ihnen, das Gerät auszuschalten, nachdem eine festgelegte Zeit verstrichen ist. 1. Während Sie Radio hören, tippen Sie auf die SLEEP-Taste (8) am Hauptgerät oder die Fernsteuerungstaste (3), die Ruhezeit '90' (Minuten) in der LED-Anzeige erscheint. 2. Durch wiederholtes Tippen auf die Taste SLEEP, können Sie zwischen 90, 60, 30 oder 15 Minuten auswählen.
UR220 / Deutsche Bedienungsanleitung SOMMER/WINTERZEIT (DST) MODUS Wenn in dem Staat in dem Sie Wohnen Sommer/Winterzeit Umstellung vorhanden ist, können Sie diese Option verwenden, um die Zeit leicht umzustellen. 1. Drücken und halten Sie im Standby-Modus des Geräts die DST Taste (11) oder die Fernsteuerungstaste (11) für ca. 2 Sekunden, um die angezeigte Uhrzeit um eine Stunde vorzustellen. 2. Um den Sommerzeit-Modus zu deaktivieren, wiederholen Sie den obigen Vorgang.
UR220 / Deutsche Bedienungsanleitung ALTERNATIVE ANZEIGE ZWISCHEN ZEIT UND TEMPERATUR/MONAT-TAG 1. Im Radio-Modus, drücken und halten Sie am Hauptgerät die Taste (10) oder auf der Fernsteuerung die Taste (7) für ca. 3 Sekunden gedrückt, bis "ON" im Display erscheint. 2.
UR220 / Deutsche Bedienungsanleitung Technische Daten Frequenzbereich: FM 87.5 – 108 MHz Temperatursensor Daten: 32 °F bis 122 °F (0°C bis +50°C) Speicherbatterie: 3V (CR2032 Flat Lithium battery x 1) Netzteil: Eingangsspannung AC 100-240V 50- 60 Hz Ausgangsspannung DC 5V 1200mA Hersteller Wörlein GmbH Gewerbestrasse 12 D 90556 Cadolzburg Tel.: +49 9103 71 67 – 0 Fax.: +49 9103 71 67 – 12 Email.: info@woerlein.com Web: www.woerlein.
ENVIRONMENTAL PROTECTION Do not dispose of this product with the normal household waste at the end of its life cycle. Return it to a collection point for the recycling of electrical and electronic devices. This is indicated by the symbol on the product, user manual or packaging. The materials are reusable according to their markings. By reusing, recycling or other forms of utilization of old devices you make an important contribution to the protection of our environment.
UR220 / English Manual FUNCTION AND CONTROLS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21.
UR220 / English Manual REMOTE CONTROL The remote control works on one 3V "CR2025 type" lithium battery (included). To active the remote control, remove the insulation tab inserted in the battery compartment. To remove the tab, pull it in the direction of the arrow as shown in the illustration. If the operation of the remote control becomes unsatisfactory, replace the original battery with a new 3-volt lithium battery of the same type. 1. Slide out the battery holder from the remote control case.
UR220 / English Manual 1. ON/OFF / ALARM OFF 2. SOURCE / DISPLAY OFF 3. SNOOZE / SLEEP / DIMMER 4. LIGHT ON/OFF 5. MOOD LIGHT ON / OFF 6. TEMPERATURE / C-F 7. << / TUNE - / BETWEEN DISPLAY CONTENTS ON-OFF 8. ALARM 1 CONTROL 9. VOLUME DOWN 10. ALARM 2 CONTROL 11. >> / TUNE + / NAP / DST 12. TIME SET / MEMORY / MEMORY+ 13. YEAR/MONTH-DAY 14. VOLUME UP 15. NATURAL SOUND SELECT 16. MOOD LIGHT SELECT (To turn the unit RGB color changing or to stop the MOOD LIGHT color changing.) 17.
UR220 / English Manual LED DISPLAY MODE Get started •Select a proper place for the device such as a dry, and even non slip area where you can easily operate the device. •Inserting the Battery (Backup) INSTALLING/REPLACING THE BACK-UP BATTERY This unit is equipped with a battery back-up system, requiring one DC3V CR2032 lithium battery (not included) to maintain the time/calendar settings and radio presets during AC power outage. 1. Unscrew and remove the BATTERY COMPARTMENT COVER. 2.
UR220 / English Manual AC POWER CONNECTION Plug the AC power cord into a household outlet AC source. SETTING THE CALENDAR AND TIME 1. In standby mode, press and hold the unit button (7) or the remote control button (12) for about 2 seconds to enter the calendar/time set mode. 2. The year indicator will flash on the LED DISPLAY for up to 30 seconds prompting for a new entry. 3.
UR220 / English Manual Display Brightness (in standby) In standby mode, Press the unit DIMMER button (8) or the remote control DIMMER button (3) to adjust the display brightness. Display on/off function •In standby mode, press and hold unit SOURCE button (9) or the remote control SOURCE button (2) for 3 seconds. “ON” appears on the display (2). •After 15 seconds, the display (2) turns off. •Press any button to turn the display (2) on for another 15 seconds.
UR220 / English Manual AUTOMATIC SEARCH FOR RADIO STATIONS To automatically search for stations with strong signals, press and hold the main unit button (10) and (11) or the remote control button (7) and (11) until the frequency readout on the display begins to scan. Release the button. The tuner will stop on the first strong station it finds. MANUAL SEARCH FOR RADIO STATIONS 1. Tap the unit (10) and (11) button or the remote control button (7) and (11) repeatedly to choose your desired radio station. 2.
UR220 / English Manual ALARM SETTING You can set two alarm times. 6 different alarm options are available: Radio + Light / Radio / Buzzer + Light / Buzzer / Natural sound + Light / Natural sound. The setting sequence for AL1 and AL2 is as follows: In radio off mode, Press the main unit alarm set buttons (12) and (13) or the remote control buttons (8) and (10) to show the alarm time.
UR220 / English Manual Proceed as follows: 1. In standby mode, Press the unit Alarm1 button (12) or the remote control button (8). The currently set alarm time is shown. 2. Keep the button pressed for approx. 3 seconds when the alarm time is displayed. The hours of the currently set alarm time start to flash. 3. Use the unit buttons (10) and (11) or the remote control button (7) and (11) for setting. 4. Press the unit Alarm 1 button (12) or the remote control button (8) for confirmation.
UR220 / English Manual NOTE: • The alarm function turns off automatically after 30 minutes until the next day. 7a. If you want to be awakened by a radio station, select the maximum alarm volume using the unit (10) and (11) buttons or the remote control (7) and (11) buttons. 8. Press the unit Alarm 1 button (12) or the remote control Alarm 1 button (8) to confirm. Then select the light intensity (L ) for the alarm function. Selecting “OFF ” will cancel this function.
UR220 / English Manual SLEEP OPERATION The sleep timer allows you to turn the unit off after a designated time has elapsed. 1. While listening to the radio, tap the unit button SLEEP button (8) or the remote control button (3) the sleep time ‘90’ (minutes) appears in the LED DISPLAY. 2. Repeatedly tap the SLEEP button to select a sleep timer of 90, 60, 30 or 15 minutes.
UR220 / English Manual AUX IN JACK (Cable not included) 1. If required, use a suitable adapter (not included). Connect the external device as follows : • With a 3.5 mm stereo jack plug to the AUX IN socket (15). 2. Turn the device on using the unit button (14) or the remote control button (1). Press the unit button (9) or the remote control button (2) to switch to AUX IN mode. AUX IN appears in the display. 3. Start the playback of your audio source. Listen to the sound playback via the speaker.
UR220 / English Manual ALTERNATE DISPLAY BETWEEN TIME AND TEMPERATURE MONTH-DATE DISPLAY 1. In radio off mode, press and hold the unit button (10) or the remote control button (7) for about 3 seconds until “ON” appears in the LED DISPLAY. 2.
PROTECTION DE L’ENVIRONNEMENT Ne jetez pas ce produit avec les ordures ménagères lorsqu’il est usagé. Retournez-le à un point de collecte pour le recyclage des appareils électriques et électroniques. Cette recommandation est indiquée par le symbole sur le produit, le mode d’emploi ou l’emballage. Les composants sont réutilisables en fonction de leur marquage. En réutilisant, recyclant ou employant autrement les vieux appareils, vous contribuerez de façon signifiante à la protection de notre environnement.
M_UR220 / Français Guide d'utilisation FONCTION ET COMMANDES 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21.
M_UR220 / Français Guide d'utilisation TÉLÉCOMMANDE La télécommande fonctionne à l’aide d’une pile au lithium de 3 V de « type CR2025 » (incluse). Pour activer la télécommande, retirez la languette d’isolation insérée dans le compartiment de la pile. Pour enlever la languette, tirez-la dans le sens de la flèche, comme indiqué dans l’illustration. Si la télécommande cesse de fonctionner de manière insatisfaisante, remplacez la pile d’origine avec une nouvelle pile au lithium de 3 volts du même type. 1.
M_UR220 / Français Guide d'utilisation EMPLACEMENT DES COMMANDES DE LA TÉLÉCOMMANDE 1. MARCHE/ARRÊT / ALARME INACTIVE 2. SOURCE/AFFICHAGE INACTIF(VE) 3. RAPPEL D’ALARME/SOMMEIL/VARIATEUR 4. ÉCLAIRAGE ALLUMÉ/ÉTEINT 5. ÉCLAIRAGE D’AMBIENCE ALLUMÉ/ÉTEINT 6. TEMPÉRATURE / C-F 7. << / SYNTONISATION - / ENTRE AFFICHAGE ACTIF-INACTIF DE CONTENU 8. CONTRÔLE DE L’ALARME 1 9. BAISSE DU VOLUME 10. CONTRÔLE DE L’ALARME 2 11. >> / SYNTONISATION + / SIESTE / HE 12. RÉGLAGE DE L’HEURE / MÉMOIRE / MÉMOIRE + 13.
M_UR220 / Français Guide d'utilisation MODE D’AFFICHAGE LED Indicateur de l’HEURE Indicateur PM Indicateur FM Indicateur AUX IN Indicateur de l’ALARME 1 Indicateur du MOIS Indicateur de l’ALARME 2 Indicateur du JOUR Indicateur de TEMPÉRATURE Pour commencer • • Choisissez un endroit approprié, par exemple sec et non glissant, pour placer l’appareil de manière à pouvoir facilement l’utiliser.
M_UR220 / Français Guide d'utilisation BRANCHEMENT AU SECTEUR Branchez le cordon d’alimentation à une source domestique de courant alternatif. RÉGLAGE DU CALENDRIER ET DE L’HEURE 1. En mode veille, maintenez enfoncée la touche (7) de l’appareil ou la touche (12) de la télécommande pendant 2 secondes pour entrer dans le mode de réglage du calendrier/de l’heure. 2. L’indicateur de l’année se met à clignoter sur l’AFFICHAGE LED jusqu’à 30 secondes pour solliciter une nouvelle saisie. 3.
M_UR220 / Français Guide d'utilisation Luminosité de l’écran (en mode veille) En mode veille, appuyez sur la touche DIMMER (8) de l’appareil ou sur la touche DIMMER (3) de la télécommande pour régler la luminosité de l’affichage. Fonction allumant/éteignant l’écran • En mode veille, maintenez enfoncée la touche SOURCE (9) de l’appareil ou la touche SOURCE (2) de la télécommande pendant 3 secondes. « ON » s’affiche sur l’écran (2). • Au bout de 15 secondes, l’écran (2) s’éteint.
M_UR220 / Français Guide d'utilisation SYNTONISATION DE LA RADIO 1. En mode veille, appuyez sur la touche marche/arrêt (14) de l’appareil ou sur la touche marche/arrêt (1) de la télécommande pour allumer l’appareil. 2. L’AFFICHAGE LED montre la fréquence radio pendant environ 5 secondes, avant de revenir à l’affichage normal de l’heure.
M_UR220 / Français Guide d'utilisation de l’appareil ou sur la touche (12) de la télécommande jusqu’à ce que vous atteignez le numéro/la station de radio souhaité(e) présélectionné(e). RÉGLAGE DE L’ALARME Vous pouvez régler deux alarmes. 6 options d’alarme différentes sont disponibles : Radio + Lumière / Radio / Vibreur + Lumière / Vibreur / Son naturel + Lumière / Son naturel.
M_UR220 / Français Guide d'utilisation RÉGLAGE DE L’ALARME 2 (SON NATUREL) Heure normale → Heure d'AL 2 → Minutes d'AL 2 → Jour d'AL 2 → Bippeur d'AL 2 → Radio d'AL 2 → Son naturel d'AL 2 → (Utilisez les touches (10) et (11) de l'appareil ou les touches (7) et ( 11) de la télécommande pour sélectionner le son naturel souhaité) → Volume final du son naturel d'AL 2 → Éclairage d'AL 2 → Intensité de l'éclairage d'AL 2 → Heure normale Procédez comme suit : 1.
M_UR220 / Français Guide d'utilisation • SN (son naturel) : Aussitôt que l’heure de l’alarme réglée est affichée, le son naturel résonne. Le son naturel est joué. Le volume augmente lentement jusqu’au volume réglé. Le volume ne peut pas être réglé. REMARQUE : • La fonction d’alarme se désactive automatiquement au bout de 30 minutes jusqu’au lendemain. 7a.
M_UR220 / Français Guide d'utilisation l’alarme et activer la fonction de rappel. L’alarme s’arrête temporairement et retentit de nouveau 9 minutes plus tard, mais l’indicateur AL1 (ou AL2) continue de clignoter. Remarques : Cette méthode de rappel manuelle peut être répétée indéfiniment. Pour désactiver la fonction de rappel, appuyez sur la touche marche/arrêt (14) de l’appareil ou sur la touche marche/arrêt (1) de la télécommande.
M_UR220 / Français Guide d'utilisation SON NATUREL 1. En mode veille, appuyez sur la touche MARCHE-ARRÊT (14) de l’appareil ou sur la touche MARCHE-ARRÊT (1) de la télécommande pour allumer l’appareil. 2. Appuyez la touche (9) de l’appareil ou sur la touche (2) de la télécommande pour passer au mode de son naturel. 3. Utilisez les touches (10) et (11) de l’appareil ou la touche (15) de la télécommande pour sélectionner le son naturel souhaité.
M_UR220 / Français Guide d'utilisation ALTERNER ENTRE L’AFFICHAGE DE L’HEURE ET CELUI DE LA TEMPÉRATURE, DU MOIS ET DE LA DATE 1. Quand le mode radio est désactivé, maintenez enfoncée la touche (10) de l’appareil ou sur la touche (7) de la télécommande pendant environ 3 secondes jusqu’à ce que « ON » apparaisse sur l’AFFICHAGE LED. 2.
M_UR220 / Français Guide d'utilisation Copyright Wörlein GmbH, D 90556 Cadolzburg.
MILIEUBESCHERMING Gooi dit product niet weg bij het huishoudafval aan het einde van de levensduur ervan. Breng het product terug naar een inzamelingspunt voor hergebruik van electrische en electronische apparatuur. Dit wordt aangegeven door dit symbool op het product, in de gebruiksaanwijzing of op de verpakking. De materialen zijn herbruikbaar volgens de markeringen. Door materiaal te recyclen of oude apparaten op een andere manier te hergebruiken draagt u bij aan het bescherming van ons milieu. Neem a.u.
M_UR220 / Nederlands Gebruiksaanwijzing FUNCTIES EN BEDIENINGEN 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21.
M_UR220 / Nederlands Gebruiksaanwijzing AFSTANDSBEDIENING De afstandsbediening werkt op één 3V type "CR2025" lithiumbatterij (inbegrepen). Activeer de afstandsbediening door de isolatiestrip uit de batterijhouder te verwijderen. Verwijder de strip door deze in de richting van het pijltje te trekken, zoals afgebeeld in de illustratie. Zodra de werking van de afstandsbediening begint te verslechteren, dient u de originele batterij te vervangen door een nieuwe 3V lithiumbatterij van hetzelfde type. 1.
M_UR220 / Nederlands Gebruiksaanwijzing TOETSEN OP DE AFSTANDSBEDIENING 1. AAN/UIT / ALARM UIT 2. BRON / DISPLAY UIT 3. SLUIMER / SLAAP / DIMMER 4. LICHT AAN/UIT 5. SFEERLICHT AAN / UIT 6. TEMPERATUUR / C-F 7. << / TUNER - / TUSSEN DISPLAYINHOUD AAN-UIT 8. ALARMREGELING 1 9. VOLUME OMLAAG 10. ALARMREGELING 2 11. >> / TUNER + / DUTJE / DST 12. TIJDINSTELLING / GEHEUGEN / GEHEUGEN+ 13. JAAR/MAAND-DAG 14. VOLUME OMHOOG 15. NATUURGELUID SELECTEREN 16.
M_UR220 / Nederlands Gebruiksaanwijzing LED-DISPLAYMODUS TIJD-indicator PM-indicator FM-indicator AUX IN-indicator ALARM 1-indicator MAAND-indicator ALARM 2-indicator DAG-indicator TEMPERATUUR-indicator Aan de slag • • Kies een geschikte plek voor het apparaat, zoals een droog en gelijk oppervlak met antisliplaag waar u het apparaat eenvoudig kunt bedienen.
M_UR220 / Nederlands Gebruiksaanwijzing Zorg ervoor de batterij correct te installeren. Een verkeerde polariteit kan het apparaat beschadigen en de garantie ongeldig verklaren. Wij raden u aan alkalinebatterijen van hoge kwaliteit te gebruiken, om een lange levensduur en de beste prestaties te garanderen. AC VOEDINGSAANSLUITING Sluit de voedingskabel aan op een huishoudelijk stopcontact. DE KALENDER EN TIJD INSTELLEN 1. Houd in stand-by de toets (7) op het apparaat of de afstandsbedieningtoets (12) voor ca.
M_UR220 / Nederlands Gebruiksaanwijzing Volumeregeling Druk op de toetsen (12) en (13) van het apparaat of op de afstandsbedieningtoetsen (9) en (14) om het gewenste volumeniveau in te stellen. De LED-DISPLAY zal het ingestelde volumeniveau weergeven. Schermhelderheid (in stand-by) In stand-by, druk op de toets DIMMER (8) van het apparaat of op de afstandsbedieningtoets DIMMER (3) om de helderheid van de display aan te passen.
M_UR220 / Nederlands Gebruiksaanwijzing 3. Terwijl de temperatuur wordt weergegeven, houd de toets (10) op het apparaat of de afstandsbedieningtoets (6) voor ca. 3 seconden ingedrukt om te wisselen tussen °C en °F. DE RADIO AFSTEMMEN 1. In stand-by, druk op de aan/uittoets (14) van het apparaat of op de aan/uittoets (1) van de afstandsbediening om het apparaat ‘Aan’ te schakelen. 2. De LED-DISPLAY zal de radiofrequentie voor ca. 5 seconden weergeven en vervolgens terugkeren naar de normale tijdweergave.
M_UR220 / Nederlands Gebruiksaanwijzing het gewenste geheugennummer te veranderen van P01 tot P10. 4. Herhaal stappen #1 tot en met #3 om tot op 10 FM-stations in het geheugen op te slaan. 5. Om een van de eerder geprogrammeerde stationgeheugens te herroepen, drukt u meerdere keren op de toets (7) van het apparaat of op de afstandsbedieningtoets (12) totdat u het gewenste geheugennummer/radiostation bereikt. ALARMINSTELLING U kunt twee alarmtijden instellen.
M_UR220 / Nederlands Gebruiksaanwijzing ALARM 2 INSTELLEN (NATUURGELUID) Normale Tijd → AL 2 Uur → AL 2 Minuut → AL 2 weekdag → AL 2 Zoemer → AL 2 Radio →AL 2 Natuurgeluid →(Gebruik de toeten (10) en (11) van het apparaat of de afstandsbedieningtoetsen (7) en (11) om het gewenste natuurgeluid te selecteren) →AL 2 uiteindelijk natuurgeluidvolume →AL 2 Licht → AL 2 Lichtintensiteit → Normale Tijd. Ga als volgt te werk: 1.
M_UR220 / Nederlands Gebruiksaanwijzing • NS (natuurgeluid): Het natuurgeluid schakelt in zodra uw ingestelde alarmtijd wordt weergegeven. Het natuurgeluid wordt afgespeeld. Het volume verhoogt geleidelijk aan tot op het ingestelde volume. Het volume kan niet worden aangepast. OPMERKING: • De alarmfunctie schakelt na 30 minuten automatisch uit tot de volgende dag. 7a.
M_UR220 / Nederlands Gebruiksaanwijzing Deze handmatige sluimerfunctie kan zo vaak als u wilt worden herhaald. U kunt de sluimerfunctie uitschakelen door op de aan/uittoets (14) van het apparaat of op de aan/uittoets (1) van de afstandsbediening te drukken. De AL1-indicator (of AL2) zal stoppen met knipperen. SLAAPFUNCTIE U kunt de slaaptimer gebruiken om het apparaat uit te laten schakelen nadat een bepaalde tijd is verstreken. 1.
M_UR220 / Nederlands Gebruiksaanwijzing 2. Druk op de toets (9) van het apparaat of op de afstandsbedieningtoets (2) om de natuurgeluidmodus in te schakelen. 3. Gebruik de toetsen (10) en (11) op het apparaat of de afstandsbedieningtoets (15) om het gewenste natuurgeluid te selecteren. ZOMERTIJDMODUS (DST) Als in uw land de zomertijd (DST) geldt, kunt u deze optie gebruiken om de correcte tijd eenvoudig aan te passen. 1.
M_UR220 / Nederlands Gebruiksaanwijzing DE DISPLAY WISSELEN TUSSEN TIJD, TEMPERATUUR EN MAAND-DATUMWEERGAVE 1. Met de radio uitgeschakeld, houd de toets (10) van het apparaat of de afstandsbedieningtoets (7) voor ca. 3 seconden ingedrukt totdat “ON” verschijnt op de LED-DISPLAY. 2.
AVVERTENZA PERICOLO DI SCOSSE ELETTRICHE, NON APRIRE ATTENZIONE: AL FINE DI RIDURRE IL PERICOLO DI SCOSSE ELETTRICHE, NON RIMUOVERE IL COPERCHIO (O LA PARTE POSTERIORE). NON CI SONO PARTI RIPARABILI DALL 'UTENTE ALL'INTERNO. PER ASSISTENZA RIVOLGERSI A PERSONALE DI ASSISTENZA QUALIFICATO.
14. Questa apparecchiatura e un elettrodomestico di Classe II o a doppio isolamento. E' stata progettata in modo tale da non richiedere un collegamento di sicurezza alla terra. Attenzione: • La batteria (batteria o pacco batterie) non devono essere esposti a calore eccessivo come luce solare, fuoco o simili. • Prima di utilizzare il sistema, verificare che la tensione di alimentazione del sistema corrisponda a quella della rete elettrica locale.
M_UR220 / Italiano Manuale di istruzioni FUNZIONI E CONTROLLI 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21.
M_UR220 / Italiano Manuale di istruzioni TELECOMANDO Il telecomando funziona con una batteria la litio di tipo CR2025 da 3V (inclusa). Per attivare il telecomando, rimuovere la linguetta di isolamento inserita nel vano batteria. Per rimuovere la linguetta, tirarla in direzione della freccia come mostrato nell'illustrazione. Se il funzionamento del telecomando non è più soddisfacente, sostituire la batteria originale con una batteria al litio da 3V nuova dello stesso tipo. 1.
M_UR220 / Italiano Manuale di istruzioni POSIZIONE DEI CONTROLLI SUL TELECOMANDO 1. ON / OFF / SVEGLIA OFF 2. SORGENTE / DISPLAY OFF 3. SOSPENDI / INTERROMPI / SCURIMENTO 4. LUCE ON / OFF 5. LUCE D’ATMOSFERA ON / OFF 6. TEMPERATURA / °C-°F 7. << / SINTONIA - / CONTENUTI TRA DISPLAY ON-OFF 8. CONTROLLO SVEGLIA 1 9. RIDUZIONE VOLUME 10. CONTROLLO SVEGLIA 2 11. >> / SINTONIA + / NAP / DST 12. IMPOSTAZIONE ORA / MEMORIA / MEMORIA + 13. ANNO / MESE - GIORNO 14. AUMENTO VOLUME 15. SELEZIONE SUONO NATURALE 16.
M_UR220 / Italiano Manuale di istruzioni MODALITÀ DISPLAY A LED Indicatore TIME Indicatore PM Indicatore FM Indicatore AUX IN Indicatore SVEGLIA 1 Indicatore MESE Indicatore SVEGLIA 2 Indicatore GIORNO Indicatore TEMPERATURA Per iniziare • • Scegliere un luogo appropriato dove collocare il dispositivo, ad esempio una zona asciutta, piana e non scivolosa da dove si possa facilmente controllare il prodotto.
M_UR220 / Italiano Manuale di istruzioni COLLEGAMENTO DELL’ALIMENTAZIONE CA Inserire l’adattatore CA nella presa di rete. IMPOSTAZIONE DEL CALENDARIO E DELL’ORA 1. In modalità stand-by, premere e tenere premuto il tasto sull’unità (7) o il tasto sul telecomando (12) per circa 2 secondi per entrare in modalità di impostazione del calendario/ora. 2. L’indicatore dell’anno lampeggia sul DISPLAY A LED per un massimo di 30 secondi, sollecitando l’inserimento di un nuovo valore. 3.
M_UR220 / Italiano Manuale di istruzioni Funzione display on/off • In modalità stand-by, premere e tenere premuto il tasto SOURCE (9) sull’unità oppure il tasto SOURCE (2) sul telecomando per 3 secondi. Sul display (2) appare “ON”. • Dopo 15 secondi, il display (2) si spegne. • Premere un pulsante qualsiasi per accendere il display (2) per altri 15 secondi.
M_UR220 / Italiano Manuale di istruzioni indica l’inizio della scansione. Rilasciare il tasto. Il sintonizzatore si fermerà in corrispondenza della prima stazione che trova. RICERCA MANUALE DELLE STAZIONI RADIO 1. Toccare i tasti (10) e (11) sull’unità oppure i tasti (7) e (11) sul telecomando per scegliere la stazione radio desiderata. 2. Toccare i tasti (12) e (13) sull’unità oppure i tasti (9) e (14) sul telecomando per impostare il volume desiderato.
M_UR220 / Italiano Manuale di istruzioni (8) e (10) sul telecomando per più di 2 secondi per accedere alla modalità di impostazione della sveglia. Dopo essere entrati in modalità impostazione, premere i tasti di impostazione sveglia (12/13) per attivare ciclicamente le altre modalità come segue: IMPOSTAZIONE DELLA SVEGLIA 1 (SEGNALE ACUSTICO) Ora normale → AL 1 ora → AL 1 minuto → AL 1 sveglia giorno della settimana → AL 1 intensità del segnale acustico → Luce → Intensità della luce → Ora normale.
M_UR220 / Italiano Manuale di istruzioni 3. Utilizzare i tasti (10) e (11) sull’unità oppure i tasti (7) e (11) sul telecomando per l’impostazione. 4. Premere il tasto Sveglia 1 (12) sull’unità o il tasto (8) sul telecomando per confermare. I minuti iniziano a lampeggiare. 5. Utilizzare i tasti (10) e (11) sull’unità oppure i tasti (7) e (11) sul telecomando per l’impostazione. 6. Ora selezionare i giorni in cui si desidera che la sveglia si attivi.
M_UR220 / Italiano Manuale di istruzioni 8. Premere il tasto Sveglia 1 (12) sull’unità oppure il tasto Sveglia 1 (8) sul telecomando per confermare. Selezionare quindi l’intensità della luce (L) per la funzione di allarme. Selezionando “OFF”, si annulla questa funzione. NOTA: La luce all’interno dell’apparecchio (1) si accende 30 minuti prima dell’ora di sveglia preimpostata. La luminosità aumenterà gradualmente, a partire dal livello di intensità precedentemente impostato. 9.
M_UR220 / Italiano Manuale di istruzioni scelta: l’unità continuerà a suonare per il lasso di tempo impostato, quindi si spegnerà automaticamente. 3. Per annullare il timer, toccare più volte il tasto SLEEP fino a visualizzare l’ora corrente sul DISPLAY LED, dopo l’ultima opzione (15 minuti). • Questa funzione può essere disattivata premendo il pulsante (14). 4. Questa funzione può essere annullata con il tasto (14) sull’unità o il tasto (1) sul telecomando.
M_UR220 / Italiano Manuale di istruzioni 1. Se necessario, utilizzare un adattatore (non incluso). Collegare il dispositivo esterno come segue: • Con una presa jack stereo da 3,5 mm alla presa AUX IN (15). 2. Accendere il dispositivo utilizzando il tasto (14) sull’unità oppure il tasto (1) sul telecomando. Premere il tasto (9) sull’unità oppure il tasto (2) sul telecomando per passare alla modalità AUX IN. Sul display viene visualizzato AUX IN. 3. Avviare la riproduzione della sorgente audio.
M_UR220 / Italiano Manuale di istruzioni VISUALIZZAZIONE ALTERNATA TRA ORA, TEMPERATURA E MESE 1. In modalità radio, premere e tenere premuto il tasto (10) sull’unità oppure il tasto (7) sul telecomando per circa 3 secondi fino a quando sul display LED appare “ON”. 2.
PROTECCIÓN MEDIOAMBIENTAL No elimine este producto con la basura doméstica al terminar su vida útil. Llévelo a un punto de recogida para reciclado de aparatos eléctricos y electrónicos. Esto se indica mediante el símbolo en el producto, en el manual de usuario o en el embalaje. Los materiales son reutilizables conforme a los símbolos. Al reutilizar, reciclar u otras formas de utilización de aparatos antiguos, está contribuyendo a proteger el medio ambiente.
M_UR220 / Español Manual de instrucciones FUNCIONES Y CONTROLES 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19.
M_UR220 / Español Manual de instrucciones 20. ANTENA FM 21. COMPARTIMENTO DE LA BATERÍA (PARTE INFERIOR DE LA UNIDAD) MANDO A DISTANCIA El mando a distancia funciona con una pila de litio 3 V tipo "CR2025" (incluida). Para activar el mando a distancia, retire la pestaña aislante del compartimiento de la pila. Para quitar la pestaña, tire de ella en la dirección de la flecha como se muestra en la ilustración.
M_UR220 / Español Manual de instrucciones UBICACIÓN DE LOS CONTROLES DEL MANDO A DISTANCIA 1. ENCENDER/APAGAR / APAGAR ALARMA 2. FUENTE/ APAGAR LA PANTALLA 3. REPETICION DE ALARMA / TEMPORIZADOR / REGULADOR 4. ENCENDER / APAGAR LA LUZ 5. ENCENDER / APAGAR LA LUZ DE AMBIENTE 6. TEMPERATURA / C-F 7. << / SINTONIZAR - / ENTRAR Y SALIR DE OPCIONES DE PANTALLA 8. CONTROL DE ALARMA 1 9. BAJAR VOLUMEN 10. CONTROL DE ALARMA 2 11. >> / SINTONIZAR + / SIESTA / HORARIO DE VERANO (DST) 12.
M_UR220 / Español Manual de instrucciones MODO DE PANTALLA LED Indicador de HORA Indicador PM Indicador de ENTRADA AUXILIAR Indicador de ALARMA 1 Indicador de MES Indicador FM Indicador de ALARMA 2 Indicador de DÍA Indicador de TEMPERATURA Introducción • • Elija un lugar adecuado para colocar el dispositivo, como una zona seca uniforme y antideslizante donde se pueda usar el dispositivo fácilmente.
M_UR220 / Español Manual de instrucciones Asegúrese de colocar la pila correctamente. La polaridad incorrecta puede dañar la unidad y anular la garantía. Para lograr un mejor rendimiento y una duración más larga, se recomienda el uso de una pila alcalina de calidad. CONEXIÓN DE LA ALIMENTACIÓN CA Conecte el cable de alimentación CA a una toma de corriente CA del hogar. AJUSTES DE LA FECHA Y HORA 1.
M_UR220 / Español Manual de instrucciones Ajuste del volumen Pulse los botones (12) y (13) de la unidad o los botones del mando a distancia (9) y (14) para ajustar el nivel de volumen deseado. El nivel del volumen aparecerá en la PANTALLA LED. Brillo de la pantalla (en espera) En el modo de espera, presione el botón DIMMER (8) de la unidad o el botón DIMMER (3) del mando a distancia para ajustar el brillo de la pantalla.
M_UR220 / Español Manual de instrucciones SINTONIZACIÓN DE LA RADIO 1. En el modo de espera, presione el botón de encendido/apagado (14) de la unidad o el botón de encendido/apagado (1) del mando a distancia para encender la unidad. 2. La PANTALLA LED mostrará la frecuencia de radio durante unos cinco segundos y luego volverá a la visualización de la hora normal.
M_UR220 / Español Manual de instrucciones o el botón del mando a distancia (12) hasta llegar al número de la emisora favorita/emisora de radio que desee. AJUSTE DE LA ALARMA Puede establecer dos alarmas diferentes. Hay disponibles seis opciones de alarma: Radio + Luz / Radio / Timbre + Luz / Timbre / Sonido natural + Luz/ Sonido natural.
M_UR220 / Español Manual de instrucciones AJUSTE DE LA ALARMA 2 (SONIDO NATURAL) Hora normal → Hora AL 2 → Minuto AL 2 → Alarma semanal AL 2 → Pitido AL 2 → Radio AL 2 → Sonido natural AL 2 → (Utilice los botones de la unidad (10) y (11) o los botones del mando a distancia (7) y (11) para seleccionar el sonido natural) → Volumen final del sonido natural AL 2 → Luz AL 2 → Intensidad de la luz AL 2 → Hora normal Haga lo siguiente: 1.
M_UR220 / Español Manual de instrucciones Cuando sea la hora de la alarma la radio se encenderá. Sonará la ultima emisora que haya escuchado. El volumen aumentará lentamente hasta llegar al volumen establecido. El volumen no se puede ajustar. • SN (sonido natural): Cuando sea la hora de la alarma el sonido natural se activará. El sonido natural empezará a sonar. El volumen aumentará lentamente hasta llegar al volumen establecido. El volumen no se puede ajustar.
M_UR220 / Español Manual de instrucciones encendido/apagado (14) o el botón SNOOZE (3) del mando a distancia) para suspender la alarma y activar la función de repetición. La alarma se detendrá temporalmente y volverá a sonar nueve minutos después, pero el indicador AL1 (o AL2) seguirá parpadeando. Notas: Podrá realizar esta operación de repetición de la alarma de forma manual todas las veces que desee.
M_UR220 / Español Manual de instrucciones Nota: Al utilizar la alarma de SIESTA la opción de despertarse con luz estará inactiva. SONIDO NATURAL 1. En el modo de espera, presione el botón de ENCENDIDO/APAGADO (14) de la unidad o el botón de ENCENDIDO/APAGADO (1) del mando a distancia para "Encender" la unidad. 2. Pulse el botón de la unidad (9) o el botón del mando a distancia (2) para cambiar al modo de sonido natural. 3.
M_UR220 / Español Manual de instrucciones VISUALIZAR OPCIONES DE PANTALLA: HORA, TEMPERATURA Y MES/FECHA 1. En el modo de radio, mantenga pulsado el botón de la unidad (10) o el botón del mando a distancia (7) alrededor de tres segundos hasta que aparezca "ON" en la PANTALLA LED. 2.
PROTECÇÃO AMBIENTAL Não junte este aparelho juntamente com os resíduos domésticos no final do seu ciclo de vida útil. Coloque-o num ponto de recolha para reciclagem de aparelhos eléctricos e electrónicos. Isto é indicado pelo símbolo no aparelho, manual do utilizador ou na embalagem. Os materiais são reutilizáveis de acordo com as marcas respectivas.
M_UR220 / Português Manual de Instruções FUNÇÃO E CONTROLOS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20.
M_UR220 / Português Manual de Instruções 21. COMPARTIMENTO DA PILHA (BASE DA UNIDADE) CONTROLO REMOTO O controlo remoto funciona com uma pilha de lítio do tipo "CR2025" de 3 V (incluída). Para ativar o controlo remoto, retire a patilha isolante inserida no compartimento da pilha. Para retirar a patilha, puxe-a na direção da seta conforme ilustrado. Se o controlo remoto funcionar de forma insatisfatória, substitua a pilha original por uma pilha nova de lítio de 3 volts do mesmo tipo. 1.
M_UR220 / Português Manual de Instruções LOCALIZAÇÃO DOS CONTROLOS REMOTOS 1. LIGAR/DESLIGAR / DESLIGAR ALARME 2. FONTE / DESLIGAR VISOR 3. SUSPENDER / SILÊNCIO /OBSCURECER 4. LIGAR/DESLIGAR LUZ 5. LIGAR/DESLIGAR LUZ AMBIENTE 6. TEMPERATURA / °C - °F 7. << / SINTONIZAR - / LIGAR/DESLIGAR CONTEÚDO ENTRE O VISOR 8. CONTROLO DO ALARME 1 9. DIMINUIR O VOLUME 10. CONTROLO DO ALARME 2 11. >> / SINTONIZAR+/ SESTA / DST 12. DEFINIR HORA / MEMÓRIA / MEMÓRIA + 13. ANO/MÊS-DIA 14. AUMENTAR O VOLUME 15.
M_UR220 / Português Manual de Instruções MODO VISOR LED Indicador de HORA Indicador de PM Indicador de FM Indicador AUX IN Indicador de ALARME 1 Indicador de MÊS Indicador de ALARME 2 Indicador de DIA Indicador de TEMPERATURA Começar • • Escolha um local adequado para o aparelho, tal como uma área seca e não derrapante, onde possa utilizá-lo facilmente.
M_UR220 / Português Manual de Instruções Certifique-se de que a pilha está instalada corretamente. A polaridade errada pode danificar o aparelho e anular a garantia. Para um melhor desempenho e uma utilização mais prolongada, recomendamos o uso de pilhas alcalinas. LIGAÇÃO COM ALIMENTAÇÃO CA Ligue o cabo de alimentação CA a uma tomada elétrica. CONFIGURAR O CALENDÁRIO E A HORA 1.
M_UR220 / Português Manual de Instruções Regular o volume Prima os botões (12) e (13) da unidade ou os botões (9) e (14) do controlo remoto para definir o nível de volume desejado. O nível do volume aparecerá no VISOR LED. Luminosidade do visor (no modo de espera) No modo de espera, prima o botão DIMMER (8) na unidade ou o botão DIMMER (3) no controlo remoto para ajustar a luminosidade do visor.
M_UR220 / Português Manual de Instruções SINTONIZAR O RÁDIO 1. No modo de espera, prima o botão ligar/desligar (14) da unidade ou o botão ligar/desligar (1) do controlo remoto para ligar a unidade. 2. O VISOR LED mostrará a frequência de rádio durante 5 segundos e depois reverterá para a exibição da hora normal.
M_UR220 / Português Manual de Instruções ou o botão (12) do controlo remoto até obter a desejada estação de rádio/número predefinido. CONFIGURAR O ALARME Pode definir dois horários de alarme. Estão disponíveis 6 opções de alarme diferentes: Rádio + Luz / Rádio / Buzzer + Luz / Buzzer / Som natural + Luz / Som natural.
M_UR220 / Português Manual de Instruções controlo remoto para selecionar o som natural desejado) → AL 2 Volume final do som natural →AL 2 Luz → AL 2 Intensidade da luz → Hora normal Prossiga da seguinte forma: 1. No modo de espera, prima o botão Alarm 1 (12) na unidade ou o botão (8) no controlo remoto. A hora do alarme atualmente definido é mostrada. 2. Mantenha o botão premido aproximadamente 3 segundos quando a hora do alarme for exibida. A hora do alarme atualmente definido começa a piscar. 3.
M_UR220 / Português Manual de Instruções NOTA: • A função de alarme desliga-se automaticamente após 30 minutos, até ao dia seguinte. 7a. Se quiser ser acordado por uma estação de rádio, selecione o volume máximo do alarme utilizando os botões (10) e (11) da unidade botões ou os botões (7) e (11) do controlo remoto. 8. Prima o botão Alarm 1 (12) da unidade ou o botão Alarm 1 (8) do controlo remoto para confirmar. Em seguida, selecione a intensidade da luz (L) para a função de alarme.
M_UR220 / Português Manual de Instruções FUNCIONAMENTO SILÊNCIO O temporizador de sono permite-lhe desligar a unidade depois de decorrer o tempo designado. 1. Enquanto escuta o rádio, prima o botão SLEEP (8) da unidade ou o botão (3) do controlo remondo, o tempo de sono '90' (minutos) aparece no visor LED. 2. Prima repetidamente o botão SLEEP para selecionar 90, 60, 30 ou 15 minutos no temporizador de sono.
M_UR220 / Português Manual de Instruções facilmente a hora correta. 1. No modo de espera, prima sem soltar o botão DST (11) da unidade ou o botão (11) do controlo remoto durante 2 segundos para adiantar a hora exibida uma hora. 2. Para cancelar o modo DST, repita a operação acima. ENTRADA AUX IN (Cabo não incluído) 1. Se necessário, utilize um adaptador adequado (não incluído). Ligue o dispositivo externo da seguinte forma: • Com um cabo de estéreo de 3,5 mm à tomada AUX IN (15). 2.
M_UR220 / Português Manual de Instruções ALTERNAR A EXIBIÇÃO ENTRE HORA, MÊS-DATA E TEMPERATURA 1. No modo desligar rádio, prima sem soltar o botão (10) da unidade ou o botão (7) do controlo remoto durante 3 segundos, até aparecer “ON” no VISOR LED. 2.