Operation Manual

7
Press the ALARM 1 or ALARM 2 button twice.
The AL indicator is Green. This indicates the Wake To Radio mode is selected and the
alarm is ‘On’.
Press the ALARM 1 or ALARM 2 button three times.
The AL indicator is Yellow. This indicates the Wake To CD mode is selected and the alarm
is ‘On’.
Press the ALARM 1 or ALARM 2 button four times and the AL1 or AL2 indicators
disappear. This indicates that the alarms are canceled.
Wake To Buzzer
1. Check the wake-up time settings for Alarm 1, Alarm 2, or both alarms and adjust the wake up
times if necessary.
2. Press the ALARM 1 and/or ALARM 2 buttons once. The AL1 and/or AL2 indicators appear
Red.
3. At the selected wake up times the buzzer will turn on. It will continue for one hour and then
stop automatically and reset itself for the following day.
4. To stop the buzzer immediately, press the ALARM OFF/POWER button.
Wake To Radio
1. Check the wake-up time settings for Alarm 1, Alarm 2, or both alarms and adjust the wake up
times if necessary.
2. Turn the Radio ‘On’, tune to the desired station and set the VOLUME control to the desired
level to wake you up, then turn the radio ‘Off’ again.
3. Press the ALARM 1 and/or ALARM 2 buttons twice. The AL1 and/or AL2 indicators appear
Green.
4. At the selected wake up times the Radio will turn on. It will continue for one hour and then
stop automatically and reset itself for the following day.
5. To stop the Radio immediately, press the ALARM OFF/POWER button.
Wake To CD
1. Check the wake-up time settings for Alarm 1, Alarm 2, or both alarms and adjust the wake up
times if necessary.
2. Insert the desired CD in the CD player, start playback and adjust the VOLUME to the desired
level. Then press the STOP button to stop the disc and the ALARM OFF/POWER button to
shut the power ‘Off’.
3. Press the ALARM 1 and/or ALARM 2 buttons three times. The AL1 and/or AL2 indicators
appear Yellow.
4. At the selected wake up times the CD player will turn on. It will play for one hour, or until the
end of the disc, whichever comes first, and then stop automatically and reset itself for the
following day.
5. To stop the CD player immediately, press the ALARM OFF/POWER button.
NOTE: If there’s no CD inserted, or the CD is damaged, it will automatically change to Buzzer.
Canceling The Alarms
To cancel the alarms completely press the respective ALARM 1 and/or ALARM 2 buttons until
the AL1 and/or AL2 indicators disappear.