Operation Manual

CLOCK SETTING
Clock setting only available in standby mode
ALARM SETTING
Before setting the alarm, please make sure the clock setting is completed.
SNOOZE
When the alarm has been activated. You may press the “ ” button to delay the alarm for
another 9 minutes. After delay alarm 6 times, the alarm will automatic disable.
SLEEP
In any operation mode, press the SLEEP button to set the desired sleep time
(90>80>70>…20>10>OFF>).
AUTO OFF
This product is equipped with an auto power-save function. In the CD/MP3/USB/AUX-IN mode, if the
unit remains in STOP or PAUSE or no sound output for more than 10 minutes it will automatically
switch off, please press POWER button to re-active the unit.
1. To cancel the Alarm, please press “ ” or “ ” button until the alarm icon disappear.
2. Press “ ” or “ ” again to active the alarm with the previous alarm setting, all the
setting will
show on display again for review.
3. To change the alarm setting, please press and hold “ ” or “ ” button until the unit entered the
alarm setting mode again.
• Minute
• Sound source (Buzze/Radio/CD/USB)
• Volume
1. Press and hold the SET button until the system entered the clock setting mode.
2. System will enter the 12/24 hour setting & Display will flash “24H” .
3. Press “ ” or “ ” to select the desire hour format.
4. Press SET button once to confirm & enter the next setting.
5. Repeat step 3&4 to complete minutes & hour setting.
1. Short Press the “ ” or “ ” button once to enter alarm setting mode.
2. Press “ ” or “ ” button to select the desire Hour.
3. Press “ ” or “ ” to confirm.
4. Repeat step 2 & 3 to set the
OTHER OPERATION
SNOOZE