Operation Manual

MODE
PROGRAM MODE
The operation of Program mode are as the same as that of CD/MP3. Please refer to CD/MP3 operation.
1. Plug in the USB flash to the USB port.
2. Press “ ” button to enter USB mode, “USB” icon will show on display.
3. Playback will start automatically from the first track.
4. Press the “ ” button when you want to stop playback temporarily.
5. Press the “ ” button when finished.
AUX-IN
Headphone Function
1. Connect 3.5 mm cable to this unit and your device with 3.5mm output jack.
2. Press “ ” button until the unit entered the “AUX” mode.
3. Press play on your device and enjoy.
1. Connect the Headphone & the device with the 3.5mm jack.
2. Press “ ” or “ ” on the device to adjust the volume Level.
Remark: Headphone & 3.5 mm Aux-In cable are not included
USB OPERATION
OTHER OPERATION
Press to start playing USB.
Press again to stop playing USB operation temporarily.
Press again to resume playback.
Press once to playback the current track,
Press again for previous track
Press for next track
Press to stop USB operation.
Press and hold “+10” button 2 second then playback go up 10 tracks.
(for example: 01>11>21…)
Press for EQ sound effect (JAZZ / CLASSIC / ROCK / POP / FLAT)
+10
EQ