Instruction Manual

12
Setup
Function settings
1 Press < > to display the function menu.
2 Turn the volume knob to select the item to set
(see the table below), then press the knob to
make a selection.
3 Press < > to exit.
✎ NOTE
• If no operation is done for about 10 seconds, the
operation will be canceled.
Repeat All: Repeats all files.
(
indicator lights up.)
One: Repeats current file.
(
indicator lights up.)
Random OFF: Normal playback.
ON: Randomly plays all files.
(
indicator lights up.)
Setup
Settings
1 Press an hold < > to display the general
setting.
2 Press <E>/<F> to select the category.
3 Turn the volume knob to select an item (see the
following table), then press the knob.
4 Repeat step 3 until the desired item is selected/
activated or follow the instructions stated on
the selected item.
5 Press < >.
Audio Settings
Fader R12 — F12 (00): Adjusts the front and
rear speaker output balance.
Balance L12 — R12 (00): Adjusts the left and
right speaker output balance.
General Settings
Beep ON/OFF: Activates or deactivates the
keypress tone.
Date/Clock Adjusts the date and clock. (P.3)
Language Selects the text language used for on-
screen information.
Time
Format
12h/24h: Selects time format.
Wallpaper BLACK/BLUE: Selects the wallpaper
image.
Demo Set the demonstration mode. Default
is “ON”.
Initialize Select [Initialize] and then select [Yes] to
set all the settings to the initial default
settings.