User's Manual

BLUETOOTH

DEVICE INSTRUCTIONS

Placing a Call

1. Dial the desired number on the paired phone.

2. Once dialing is in progress, CALLING will appear on the screen.

3. Once the call is in progress, TALK will appear on the

screen along with the elapsed call time (TALK 00:00).

Receiving a Call

1. If a call is incoming, any audio playback from the current

source will either be muted or paused (depending on the

source) and PHONE IN will be shown on the screen along

with the caller ID if it is enabled by the phone/carrier.

2. To accept the call, rotate the left-rear knob (#2)

counter-clockwise.

Ending a Call

1. To end the call, rotate the left-rear knob (#2)

counter-clockwise.

NOTE: We recommend mounting the microphone on the sun visor, A-pillar, steering

column or somewhere inside the vehicle close to the driver. The microphone is very

sensitive, and you may speak at normal volume when using hands-free operation.

Streaming Music From Your Device

2. Once your device is paired with your radio, make

sure the source mode is set to BT AUDIO.

3. Next, select your desired playback source

on your device (iTunes

, Pandora

, etc) and

play the music as you normally would.

NOTE: Some devices may allow your radio the ability to skip songs/tracks/selections

by using the right-front knob (#8).

longbeach_manual-8.indd 29 6/29/16 12:19