User's Manual

STEP 1: Install the Long Beach Face

Plug the ribbon cable included with the Motor 4 radio body

into the Long Beach radio face. After plugging in the radio

face, attach it to the radio body (if it is not already attached)

and tighten with the four radio face mounting screws provided

in the radio face box (the screws are very small and are

included in the hardware kit included with your Motor 4 box).

The RetroSound

logo on the Motor 4 radio body should be facing

upwards. Take care to not install the face to the body upside down.

NOTE: Optionally, the Long Beach radio face can be mounted remotely up to nine

feet away from the Motor 4 radio body using an optional Face to Body Extension

Cable (sold separately). In some installation applications, a bracket (not included)

can be used to mount the radio face to the radio body at an angle.

INSTALLATION INSTRUCTIONS

Figure 1 - Attach the Long Beach Radio Face

Long Beach

Radio Face

Motor 4

Radio Body

longbeach_manual-8.indd 8 6/29/16 12:19