User's Manual

9
INSTALLATION INSTRUCTIONS
STEP 2: Install InfiniMount Brackets
 bracket to the correct side of the radio
body using the supplied screws (the brackets are marked with
a “L” for left and a “R” for right). Before tightening the screws,
you need to adjust the brackets up, down, forward or backward
(see Figure 2). You may also rotate, cut, or bend the brackets to

screws tightened on each side.*
*In some installations the brackets must be moved far enough forward or backwards
or rotated so that only two screws will align with the threaded screw holes



NOT void your warranty.
R

motor4_manual-9.indd 9 9/29/17 08:20