User's Manual

25
USB DEVICE INSTRUCTIONS
Connecting a USB Device
The USB 1 and USB 2 inputs are located at the rear of the radio
body. The USB cables must be routed to a convenient and
accessible location for connecting USB devices.

iPod
®
/iPhone
®
or supported USB device to one of the USB inputs, the
radio will display
USB 1 or USB 2 for three seconds. Then the radio will

The
icon appears on the LCD during USB playback.
About MP3/WMA/FLAC Files
MP3 (MPEG Audio Layer-3),WMA (Windows Media Audio) and FLAC (Free Lossless Audio


Common facts about these compressed-sound formats:
• High bit rate and high sampling frequencies are
recommended for high sound quality.
• Selecting VBR (Variable Bit Rate) is not recommended because playing
time is not displayed properly and there may be some audible skipping
artifacts. The playback sound quality differs depending on the encoding
circumstances. For details, refer to the user manual of your encoding software.
• 

• 


• 
This radio will NOT read NTFS formatted drives.
• 

• Motor 4 will play your MP3

motor4_manual-9.indd 25 9/29/17 08:21