NA788 Car Audio System Player INSTRUCTION MANUAL CD MP3 WMA USB SD AUX-IN BT iPod/iPhone USB 1A Smart Phone Battery Charge
Safety Preparation WARNING How to attach/detach the faceplate Attach Detach Stop the car before operating the unit. Important to know... To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. Caution: Adjust the volume so that you can hear sounds outside the car. Driving with the volume too high may cause an accident. Condensation: When the car is air-conditioned, moisture may collect on the laser lens. This may cause disc read errors.
Installation / Connection Caution Basic Procedure 1 Remove the key from the ignition switch, then disconnect the terminal of the car battery. 2 Make proper input and output wire connections. 3 Install the unit to your car. 4 Reconnect the terminal of the car battery. 5 Reset the unit. Warning The unit can only be installed in a car with a 12 V DC power supply, negative ground.
Installing the unit Installation with the half sleeve After inserting the half sleeve into the dashboard, select the appropriate tab according to the thickness of the dashboard material and bend them inwards to secure the holder in place. 18 Bend the appropriate tabs to hold the sleeve firmly in place.
Basic Operation Detaches the control panel Ejects the disc USB socket Open the cover OK / Mute Encoder Volume Knob 1A battery charge USB socket Open the cover Aux-In jack When you press or hold the following button(s)... Main unit General operation Switch music listening zone for the best speaker sound. (FRONT ALL / FRONT LEFT/ FRONT RIGHT / ZONE OFF). ■ To adjust the EQ (Preset Equalizer) setting. ■ Turn On or Off the Xbass booster function. ■ To turn On or Off dynamic bass boost sound.
Remote Control Operation SRC AUDIO When you press or hold the following button(s)... Main unit General operation Turn mute or restore volume. Press turn the unit on or off. Press increase the volume. Press decrease the volume. ■ ■ SRC AUDIO 6 EN Under Radio mode to enter into the Auto Seek mode, press and hold to enter into the Manual Seek mode. Under Media playback mode to skip track / file, press and hold to fast forward / backward.
Function Settings 1 Press to access into the [AUDIO MENU] mode, press and hold to enter into the [MENU] mode. 2 Press repeatedly to select the item to be adjusted. 3 Turn the encoder volume knob to select a value / option. [AUDIO MENU] ... Item BASS ADJUST BASS LEVEL MIDDLE ADJUST MIDDLE LEVEL TREBLE ADJUST TREBLE LEVEL BALANCE FADER SUBWOOFER ADJUST SUBWOOFER LEVEL SUBWOOFER LPF RESUME Selectable Setting Adjust the level -7 to +7. Adjust the level -7 to +7. Adjust the level -7 to +7.
Listening to the Radio Hold for about 2 seconds to memorize the current station. ■ Press briefly to recall memorized station. ■ In receive traffic, press to cancel receive the current traffic. 1 Press repeatedly to a band ( FM1, FM2, FM3, AM1(MW1) or AM2 (MW2) ). 2 Press to search for a station. 3 Press repeatedly to view RDS received information. Adjust [MENU] mode settings While listening to the radio... 1 Press and hold to enter into the [MENU] mode.
Listening to a Disc/ USB/SD device Press to pause. Press again to resume playback. Press to repeat one track, press again to repeat all tracks. ■ Press and hold repeat a folder. ■ ■ ■ Press to start random play, press again to cancel random play. Press and hold random a folder. Press to move next/previous folder. ■ ■ Press into search mode Press to select a track / file. Press and hold for fast forward / backward.
Listening to the iPod / iPhone Press to pause. Press again to resume playback. Press to repeat one track, press again to repeat all tracks. ■ Press and hold repeat a folder. ■ ■ ■ Press to start random play, press again to cancel random play. Press and hold random a folder. Press to move next/previous folder. ■ ■ Press into search mode Press to select a track / file. Press and hold for fast forward / backward. Playing a iPod / iPhone 1 Open the cover marked on the front panel.
Operation of Bluetooth Hands-Free Press to answer / accept the call. Press and hold to transfer the call. Press to reject / end the call. ■ ■ Press to change to “BT AUDIO" mode. You can make or receive phone calls with Bluetooth-enabled To redial number phones through the unit. You can also listen to music from a 1 Press on front panel to redial. Bluetooth-enabled device. 2 Press once again , unit will display [CALLING], and the unit starts dialing the number dialed last time.
Product Information General Power Supply: 12V DC (10.5-14.4V), negative ground Fuse: 15A Suitable Speaker Impedance: 4 -8 Aux-In level: 800mV Audio Section Maximum Power Output: Mosfet 50W x 4 Channels Continous Power Output: 24W x 4 RMS Pre-AMP Output Voltage: 4 V Subwoofer Output Voltage: 3 V Bluetooth Output power: Class 2 ISMISM Band Frequency band: 2.402-2.480GHz 2.4000GHz-2.4835GHz Band Range: 3 meters (free space) Standard: Bluetooth 2.
www.nakamichicaraudio.
