SM-CMD3014 MULTIMEDIA DVD/CD/MP3 RECEIVER with built-in 4” TFT display and TV tuner Instruction manual DVD/CD/MP34” TFT-
Dear customer! Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents ............................................................................................... 2 Important safeguards ......................................................................................... 3 Accessories........................
Important safeguards Read carefully through the manual to familiarize yourselves with this unit. Keep this manual handy as a reference for operating procedures and precautions. Do not allow persons who have not read through this manual to use this unit. “CLASS 1 LASER PRODUCT” This product contains a laser diode of higher class than 1. Laser beams from the optical pickup are dangerous to the eyes. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product.
Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Let a qualified technician check the system. Always keep the volume low enough so that you can hear sounds from outside the vehicle. Should this product fail to operate properly, contact your dealer or nearest service center. Accessories 1. 2. 3. 4. 5. 6.
Installation/connection Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring and make sure that the unit works properly. Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle. Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an emergency stop.
1. Install the sleeve into the dashboard; ensure it is installed with the correct side and there are no obstacles (wires, dashboard elements, etc) for the unit installation. 2. After installing the sleeve into the dashboard, bend tabs fitting to the size of the dashboard to fix the sleeve in place. 3. Use the metal strap to fix the rear side of the unit. Determine a place for fixing and install the strap as shown in the picture. You can bend the strap to the needed angle with your hands. 4.
2. DIN REAR-MOUNT (Method B) For this method, use the screw holes in the lateral sides of the unit. Fix the unit with the help of the factory radio mounting brackets. 1. Select a position in which the screw holes of the brackets (3) are aligned with the screw holes in the unit body, and screw in two screws (2) in each side. 2. Screw. 3. Factory radio mounting brackets. 4. Vehicle dashboard. 5. Lock (remove this part). Note: The outer trim frame and mounting sleeve are not used for method of installation.
Electrical Connection ISO Connection table Function Location Connector A 1 2 3 4 5 6 7 8 Note: Auto Connector B Rear right (+) - Purple Tel mute/Grey Rear right (-) - Purple/Black Front right (+) - Grey Battery +12V/Yellow Front right (-) - Grey/Black Auto Antenna - Blue Front left (+) - White Front left (-) - White/Black Ignition/Red Rear left (+) - Green Ground/Black Rear left (-) - Green/Black antenna wire is intended for power supply of antenna and remote control of additional amplifier.
Parking wire connection If Parking cable is connected to hand brake switch, the video display of the TFT monitor will be controlled by driving status. When the car is moving ahead, if the video disc is played, the screen shows warning and blank screen. The warning screen will prevent the driver from watching images. Reverse driving cable connection If the rear view video camera is connected, the unit automatically switches to camera picture during reverse driving.
Unit controls Front panel 1. TUN- button 2. EJECT button 3. VOL+ button 4. OK button 5. TUN+ button 6. TFT display 7. MODE button 8. IR sensor 9. 3/PLAY/PAUSE button 10. POWER/MUTE button 11. OPEN button 12. 1/PREVIOUS and 2/NEXT buttons 13. AF/REG button 14. TA/EON button 15. AV input 16. MENU button 17. BAND button 18. 5/REWIND button 19. USB port 20. 6/F.FWD button 21.
Inner panel 1. Disc slot (available when front panel is open) 2. RESET button (hole) 3. Panel status indicator (blinks when front panel detached) 4.
Remote controller (RC) 1. MODE button 2. POWER button 3. UP cursor button 4. BND/RDM button 5. ENTER button 6. LEFT cursor button 7. DOWN cursor button 8. EJECT button 9. PTY/PROG button 10. P.SCN/RPT button 11. SEEK-/PREVIOUS button 12. AF button 13. OSD button 14. STOP/PBC button 15. Digit buttons 16. PLAY/PAUSE button 17. MUTE button 18. MENU button 19. SUB-T button 20. RIGHT cursor button 21. SETUP button 22. ANGLE button 23. INT button 24. VOL+ button 25. A-B/ZOOM button 26. SEL button 27.
Changing the battery 1. Press the catch and at the same time pull out the battery tray (pic. 1). 2. Insert the 1 lithium battery, type CR2025 (3V) battery with the stamped (+) mark facing upward. Insert the battery tray into the remote controller (pic.2). Pic. 1 Pic. 2 Warning: Store the battery where children cannot reach. If a child accidentally swallows the battery, consult a doctor immediately. Do not recharge, short, disassemble or heat the battery or dispose it in a fire.
General operations Reset the unit Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press EJECT button and then press RESET button (hole) under the panel to restore the unit to the original factory settings. Power button Press any button to turn on the unit. Press POWER button on the RC or press and hold POWER/MUTE button on the panel to turn off the unit. Monitor tilt angle Press TILT button to enter the monitor tilt angle adjustment mode.
Setting the sound characteristics Press SEL button to enter the audio setting menu consisting of following items: Bass =>Treble => Balance => Fader => EQ. Press UP/DOWN cursor buttons on the RC or VOL+/VOL- buttons on the panel to select a setting. Press LEFT/RIGHT cursor buttons on the RC or TUN-/TUN+ buttons on the panel to adjust the setting. Press SEL button again to confirm and return to current mode. Note: If turning off the power all the settings of each mode will be saved.
PICTURE (available in DVD and TV modes): Red: Adjust level of red color. Support 50 levels. Default level is 25. Green: Adjust level of green color. Support 50 levels. Default level is 25 Blue: Adjust level of blue color. Support 50 levels. Default level is 25. Brightness: Support 50 levels. Default level is 25 Contrast: Support 50 levels. Default level is 25. Sharpness: Support 15 levels. Default level is 10. Screen: Adjust screen size: 16:9 - 4:3 - FULL. Color reset: Resume color default status.
REG: REG ON (the receiver accepts regional variants of the tuned station with REG icon turned on), and REG OFF (the receiver ignores regional variants). TA VOL: Adjust level of TA volume, support 50 levels. Default level is 15. EXPERT (available in Radio, DVD and TV modes): DX: Set radio station search by DX or LOCAL mode. When the LOCAL function is on, the local stations (stations with weak radio signal) can be played.
Subwoofer Connect a subwoofer to this unit using the Subwoofer output of this unit. For subwoofer operation an external amplifier is required. Dual zone function DUAL - dual zone function enabling user to listen to radio or watch TV in the front zone, and at the same time play audio or video from disc, USB or memory card. For Dual zone en external monitor with is required having its own acoustic system and possibility of volume adjustment.
Radio operations Band selection Select the RADIO mode. Press BAND button on the panel or BND/RDM button on the RC to select the desired band: FM1, FM2, FM3 (OIRT), AM (MW). Manual/automatic tuning Manual tuning: press TUN-/TUN+ buttons on the panel or SEEK-/PREVIOUS and SEEK+/NEXT on the RC and hold for 2 seconds to enter the manual tuning mode. Press these buttons repeatedly to select a frequency downward or upward step by step.
RDS function RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available, either. AF (Alternative frequencies) function Press AF button on the RC or AF/REG button on the panel to enable AF function.
TV-tuner operations Connect the TV antenna to the TV antenna jack on the rear of the unit. Select TV mode. To access the TV mode menu, press MENU button. To select a menu page (Auto Program or Manual Program) press UP/DOWN cursor buttons on the RC or VOL+/VOL- buttons on the panel. To enter the selected page press OK button on the panel or ENTER button on the RC.
Disc/USB/SD/MMC operations USB/SD/MMC notes USB format supports 2.0. Capacity: up to 8 Gb. For correct and satisfactory operation, licensed SD/MMC memory cards of famous brands should be used with this unit. Avoid using memory cards of unknown brands. Capacity: up to 8 Gb. Insert/Eject disc Press EJECT button and insert a disc into the disc slot with label side up. The disc will be automatically loaded into the unit. The first file in the root folder will be played.
MP3/DivX/JPEG file playback When you insert a storage containing MP3/DivX/JPEG file, the screen will show following interface: 1. Storage folder list 2. Scroll bar 3. Current playback info 4. Current folder content (current file is highlighted) 5. Scroll bar 6. Audio track selection 7. Image file selection 8. Video file selection Use cursor buttons to navigate in the interface and press ENTER button to confirm your selection. Note: Manufacturer guarantees regular playback of licensed discs only.
Fast forward/rewind Press and hold repeatedly SEEK-/PREVIOUS or SEEK+/NEXT buttons on the RC or press repeatedly 6/F.FWD and 5/REWIND buttons on the panel for fast backward or forward playing correspondingly. With each pressing playback speed will increase. While fast playback, press PLAY/PAUSE button on the RC or 3/PLAY/PAUSE button on the panel to resume normal speed. Note: When fast backward/forward playback reaches the previous or next track, the unit will resume normal playback.
Programming the playback Press PTY/PROG button to open program menu. Use cursor buttons to select the program position and use number buttons to input the desired track/title/chapter (depending on the disc type). Press PLAY/PAUSE button on the RC or 3/PLAY/PAUSE button on the panel to start program play, or move the cursor to select PLAY and press ENTER button on the RC or OK button on the panel to play.
Selecting audio language (for DVD only) During DVD disc playback, press AUDIO/GOTO button on the RC repeatedly to select the audio language to listen. This function will not work if a disc does not support multi-language audio. Selecting subtitle language (for DVD only) If your DVD disc supports multi-language subtitle, press SUB-T button on the RC repeatedly to switch among disc-supported languages.
DVD setup menu Press SETUP button on the RC to display setup screen, use LEFT/RIGHT cursor buttons and ENTER button to select the desired setup page: System, Language, Audio, Video, Digital. In the selected page select an option using UP/DOWN cursor buttons, then press RIGHT cursor button to go to setting list. Use UP/DOWN cursor buttons to select the needed setting. Press ENTER button on the RC or OK button on the panel to confirm.
Note: The rating can be selected only under the password unlocked status, and the limits can be worked only under the password locked status. Default If this item is selected, the unit will return to original setting. Language setup OSD language Select the language to be used for the on-screen display. Audio language Select the language to be used for the audio. You can select a preferred audio from those included on the DVD video disk. Subtitle language Select the language to be used for the Subtitles.
Video setup Set a parameter with UP/DOWN cursor buttons: Brightness, Contrast, Hue, Saturation, Sharpness. Digital setup Dynamic range If watching large dynamic scope movie program at night, selecting this mode you can reduce the volume to a very low level, at the same time, to keep the fine details sound. In this case, this doesn’t disturb the family and keep the quality sounds. When select FULL, the audio signal is minimal; when select OFF, the audio signal is maximal.
Handling and cleaning discs Dirty, scratched or warped discs may cause skip ping or noise. Handle the disc only by the edges. To keep clean do not touch its surface. Discs should be stored in their cases after use to avoid scratches. Do not expose discs to direct sunlight, high humidity, high temperature or dust. Prolonged exposure to extreme temperature can wrap the disc (such as leaving the discs in your car during summertime). Do not stick or write anything on either side of disc.
Troubleshooting guide Below is a table describing simple measures that can help you eliminate most problems likely to emerge when this unit is in use. If below measures do not help, turn to a service center or to the nearest dealer. Symptom Cause Solution No power The car ignition is not on. If the power supply is properly connected to the car The fuse is blown. Replace the fuse. accessory switch the ignition key to “ACC”. No sound Volume is on minimum. Adjust volume to a desired level.
Specification General Power supply: Maximum power output: Unit dimensions/Net weight: Gift box dimensions/Gross weight: Temperature range: TFT display Display: Resolution: Aspect ratio: Contrast ratio: Brightness: View angle: FM Radio Frequency range: Usable sensitivity: Preset memory stations: AM Radio Frequency range: Preset memory stations: Usable sensitivity: TV tuner TV system Disc player System 12 V DC 4 x 50 W 178 x 50 x 180 mm/1.8 kg 286 x 122 x 230 mm/2.
Storage support Format support ESP function: Line out Output: DVD/DVD±R/DVD±RW, CD/CD-R/CD-RW, USB, SD/MMC DVD-video/DVD-audio/SVCD/VCD/HDCD/MP3/CDDA/PictureCD/Photo-CD/JPEG/MPEG4 (DivX/XviD) 8 sec. DVD, 40 sec. ESP for CD, 120 sec ESP for MP3 2 Stereo outputs (4 RCA) (2 V) Specifications are subject to change without notice. Mass and dimensions are approximate.
! . . , ....................................................................................................34 ...................................................................................35 ..........................................................................................37 ...................................................................................38 ......................................................................................45 .............................................
, . . , . 1 1. , , . . . . . , , . . , . . . 20 . , , . . , . , 35 .
, , . , . . . , , . , , , , , . . , . .
1. 2. 3. 4. 5. ISO6. 1 1 1 1 1 : (5X25 7. 8. 9.
, , . , . . , . , , , . 30°, . , , , , , , , , . . « » ( « ), « » ( » « » DIN DIN, , . 38 ).
« 1. 2. 3. 4. 5. 6. 7. 8. »( ) . . 1. , , , ) . 2. , . . 3. . . . 4. 5. . . .
– – – 1. 2. 3. . ). . , , . ( ). , , , , . , ( .). « »( ) . . 1. , (3) (2) 2. 3. 4. 5. . . . . ( : ). .
, . OPEN. , . , , . , . . . . : : , . . . , , . : , , 41 . .
ISO A 1 2 3 4 5 6 7 8 - . . B (+) (-) (+) (-) (+) (-) (+) (-) - . . - . . +12 .- . - . . . : . . . ./ . , . , , .
( ) , . .
1. 2. 3. 4. 5. 6. TFT7. 8. 9. 10. 11. 12. 2/NEXT 13. 14. 15. 16. 17. 18. 19. USB20. 21. TUNEJECT VOL+ OK TUN+ MODE 3/PLAY/PAUSE POWER/MUTE OPEN 1/PREVIOUS AF/REG TA/EON AV MENU BAND 5/REWIND 6/F.
1. 2. 3. 4.
( 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. ) MODE POWER BND/RDM ENTER EJECT PTY/PROG P.SCN/RPT SEEK-/PREVIOUS AF OSD STOP/PBC PLAY/PAUSE MUTE MENU SUB-T SETUP ANGLE INT VOL+ A-B/ZOOM SEL SEEK+/NEXT 28. 29. 30. 31.
1. 2. , (CR 2025 3V), . . . : . , . ( 6 – ). . . .
, EJECT RESET , . , . , . POWER POWER/MUTE TILT, 2 , . . : 0 => 1 => 2 => 3 => 4 => 5 => 6. , VOL+, . VOL-, . , POWER/MU . MODE, USB MUTE , , : RADIO ( ) => SD/MMC (SD/MMC OSD, , . ) => DVD => USB ( ) => TV=> AV IN. .
SEL, ) => : Bass ( Balance ( ) => EQ ( ) ) => Treble Fader ( => ). VOL+/VOL- . , TUN+/TUN- , . SEL, . : . . , DVD . MENU, TV . MENU . TV , , VOL+/VOL- , . TUN+ ENTER OK , , , . . MENU, , ENTER . . : AUDIO (« Bass: Treble: ») - , DVD 10 10 . TV 0. 0. . 50 .
Balance: 10 . . Fader: 10 EQ: . DSP OFF - FLAT - CLASSICS - POP - ROCK - DSP OFF. PICTURE (« Red: Green: Blue: Brightness: Contrast: 25. Sharpness: 10. Screen: Color rerset: NO ( ) . ») - DVD 50 50 50 . . . TV . 25. 25. 25. . . . 50 . . . 15 : 16:9 - 4:3 - FULL ( , . OK DUAL (« Dual: (ON) Key: CURRENT ( 25. 50 . . ). . YES ( ) ENTER ») - . , DVD TV (OFF) . ) DVD DVD). Vol: DVD, RDS SETUP (« TA: SEEK/ALARM. ; 50 RDS») TA SEEK, TA ALARM, , . , DVD 15. TV , .
PI: MUTE/SOUND. PI sound: , , PI . PI, . PI mute: . RETUNE: LONG/SHORT. Retune-S Retune-L – TA Seek. Retune S: , Retune L: , TA SEEK 90 TA SEEK. MASK: DPI/ALL. AF, , , MASK DPI. , , , , EON TA: DX/LOCAL. EON TA LOCAL ( TA SEEK 30 Retune . . TA , , , , MASK ALL. ): , . EON TA DX ( ): , TA), REG: OFF-ON ( PITA VOL: (EON . .- .). REG ON ( , PI- ): AF TA . REG OFF ( . . 50 . EXPERT (« DX: , - 15. ») - , DVD DX ( TV ) ).
Stereo: - , STEREO/MONO. , , . Beep: . 2ND ( )/ALL ( ). )/OFF ( Loud: (ON)/ (OFF) Subwoofer: (ON) (OFF) Backlight: )/HIGH( )/LOW( ). OSD color: )/Light blue ( ) CLOCK (« Clock: Clock hour: Clock adjust: TILT (“ ») - , DVD . 12- ( ). . : : Dark blue ( MID )/Violet TV 24- . . ”) - , DVD TV . , . . .
DUAL - , , USB . 54 .
BND/RDM BAND : FM1 - FM2 - FM3 (OIRT) – MW (AM). : TUN+/TUNSEEK-/PREVIOUS SEEK+/NEXT SEEK-/PREVIOUS SEEK+/NEXT . TUN+/TUN. : TUN+/TUN- SEEK-/PREVIOUS SEEK+/NEXT ; . , . 6 , (18 FM, 6 AM). , . . . : P.SCN/RPT , . 6 6 . .
: , . : , RDS RDS ( P.SCN/RPT , ) ; . . , , RDS . AF ( ) AF AF/REG AF. , , . . : RDS AF , , RDS. AF. TA (Traffic Alarm) /EON , ( ) TA. , TA. , , TP , ). , . TP, , TA TA, TP, ; TP TA, . , . .
/EON , TP. , T . PTY ( ) PTY/PROG (PTY), . . . “PTY NONE” («PTY , »).
. . MENU. (Auto Program VOL+/VOLENTER Program) OK VOL+/VOLENTER MENU . . ) (SECAM1/SECAM2/PAL). (DK/BG/I). AUTO PROGRAM System: Audio: Search: MANUAL PROGRAM ( Storage: System: Audio: Channel: Fine: Memory: : OK Manual . . . . ) , ON ( . (SECAM1/SECAM2/PAL). (DK/BG/I). . . ) OFF ( ). .
/USBUSB/SD/MMC USB 2.0. USB: SD/MMC: : 8 . . . : EJECT 8 . . . . , EJECT. , . . SD/MMC/USB- USBMMC/SD SD/MMC USBUSB. . . . : USB . , , ( /USB). , .
PLAY/PAUSE 3/PLAY/PAUSE ; . MP3/DivX/JPEG , MP3/DivX/JPEG, 1. 2. 3. 4. 5. 6. 7. 8. : ( ) , ENTER . : . AVI, . 2 AVI . /USB/ STOP/PBC PLAY/PAUSE , 4/STOP . . STOP/PBC 4/STOP . .
SEEK-/PREVIOUS 1/PREVIOUS ; . SEEK+/NEXT (0-9) 2/NEXT SEEK-/PREVIOUS 6/F.FWD . . 5/REWIND . SEEK+/NEXT DVD/VCD . PLAY/PAUSE 3/PLAY/PAUSE . : , . ( ) A-B/ZOOM, . , ; . . P.SCAN/RPT, . ( , , INT , ). , . . , .
BND/RDM, , . . PTY/PROG, . , , ( PLAY/PAUSE , OK « . ). 3/PLAY/PAUSE « » , ENTER . », ENTER OK , PTY/PROG, . OSD , , , ( PBC ( )( VCDSTOP/PBC , ). VCD) PBC. , PBC. , . A: X2 => B/ZOOM X3 => X4 => X1/2 => X1/3 => X1/4 => .
AUDIO/GOTO; , , . . OK ENTER , . ( DVD) ANGLE , , . , . ( DVD) AUDIO/GOTO . , . ( DVD) SUB-T . , . ( VCD) AUDIO/GOTO => . ( : => DVD) MENU , . OK ENTER . ID3MP3 ID3-tag . 63 , .
DVD SETUP ; ENTER : , , . , , , . . ENTER OK . (NTSC, PAL, PAL60, ). . : . (interlace-S-Video). . 4:3 PS: 4:3 LB: 16:9: 4:3. 4:3, 16:9. – 0000. : . . : . , 1 , .
(1) (8) . . :8 : . . . . . DVD . . DVD : . . .
: , , , , . , . . “Full”, , “Off”, . : , ( (L+R).
, . , . , , . , . ( , ). . , , . . . . ( . ), . , , . . , , . .
, , , . , . . . ”. . . . . . 35 , “ . 35 , . . . . , . . .
. . . . , . . . RESET. . . . .
12 4 x 50 178 50 180 286 122 230 -200C - +600C 4” 480 RGB x 272 16:9 400:1 2 300 0 110 /1,8 /2,5 TFT- , 1300 FM 65 10 18 – 74 AM 522 – 1620 6 36 SECAM/PAL 70 /87,5 – 108
DVD/DVD±R/DVD±RW, CD/CD-R/CD-RW, USB, SD/MMC DVD-video/DVD-audio/SVCD/VCD/HDCD/MP3/CDDA/PictureCD/Photo-CD/JPEG/MPEG4 (DivX/XviD) 8 DVD, 40 CD, 120 c MP3 : 2 RCA (2 . .
