SM-CMD3016 DVD/CD/MP3- 3” TFT- Multimedia DVD/CD/MP3 receiver with built-in 3” TFT display and TV tuner Instruction manual
Dear customer! Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents TABLE OF CONTENTS .............................................................................................................................................. 2 IMPORTANT SAFEGUARDS.................................................................................
Important safeguards Read carefully through the manual to familiarize yourself with this unit. Keep this manual handy as a reference for operating procedures and precautions. Do not allow persons who have not read through this manual to use this unit. “CLASS 1 LASER PRODUCT” This product contains a laser diode of higher class than 1. Laser beams from the optical pickup are dangerous to the eyes. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product.
Accessories 1. 2. 3. 4. 5. 6. Receiver Front panel Protective case Remote controller ISO connector Mounting parts: Nut Spring washer Flat washer Screw M5 Screw M5x5 Metal strap Release key 7. Instruction manual 8. Warranty card 9.
Installation/Connections Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring and make sure that the unit works properly. Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle. Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an emergency stop.
2. After installing the sleeve into the dashboard, bend tabs fitting to the size of the dashboard to fix the sleeve in place. 3. Use the metal strap to fix the rear side of the unit. Determine a place for fixing and install the strap as shown in the picture. You can bend the strap to the needed angle with your hands. 4. Make the necessary wire connections. Ensure the connections are correct. 5. Install the unit into the sleeve until the side locks are fixed.
2. DIN REAR-MOUNT (Method B) For this method, use the screw holes in the lateral sides of the unit. Fix the unit with the help of the factory radio mounting brackets. 1. Select a position in which the screw holes of the brackets (3) are aligned with the screw holes in the unit body, and screw in two screws (2) in each side. 2. Screw. 3. Factory radio mounting brackets. 4. Vehicle dashboard. 5. Lock (remove this part). Note: The outer trim frame and mounting sleeve are not used for method of installation.
Connection diagram Notes: In spite of having any kinds of speaker system, must use 4 ohms impedance of speaker to reduce the distortion during high volume level. Prohibited to make the conductors of auto antenna and ground touch with each other.
Using the ISO Connector 1. If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated. 2. For connections without the ISO connectors, check the wiring in the vehicle carefully before connecting, incorrect connection may cause serious damage to this unit. Cut the connector, connect the colored leads of the power cord to the car battery as shown in the colour code table below for speaker and power cable connections.
If Parking cable is connected to hand brake switch, the video display of the TFT monitor will be controlled by driving status. When the car is moving ahead, if the video disc is played, the screen shows warning and blank screen. The warning screen will prevent the driver from watching images. Reverse driving cable connection If the rear view video camera is connected, the unit automatically switches to camera picture during reverse driving.
Panel controls Front panel 1. PWR/OFF/TFT button 2. MOD/MUT button 3. 1/OSD/LEFT button 4. PREVIOUS button 5. 2/RPT/RIGHT button 6. NEXT button 7. 3/INT/UP button 8. PTY/PLAY/PAUSE button 9. AF button 10. TFT display 11. OPEN button 12. USB port 13. SELECT button/VOLUME regulator 14. BND/NP button 15. 4/RDM/DOWN button 16. CLK button 17. 5/STOP/ENTER button 18. APS/TYPE/AUDIO button 19. 6/SET/PAU button 20. TA button 21. IR sensor 22.
Inner panel Press OPEN button on the front panel to detach it. 1. 2. 3. 4. 5. Disc loading slot SD/MMC memory card slot RESET button (hole) Panel status indicator EJECT button Pressing RESET hole will erase the clock setting and stored stations. Panel status indicator lights up when you slide the panel down, flashes when you remove the panel.
Remote controller 1. SETUP button 2. POWER button 3. ANGLE button 4. ZOOM button 5. STOP button 6. PROG button 7. STEREO button 8. Cursor (UP/DOWN/LEFT/RIGHT) buttons 9. REPEAT button 10. AMS button 11. TITLE button 12. OSD button 13. Number buttons 14. SLOW button 15. MODE button 16. SUB-T button 17. MEN/PBC button 18. PLAY/PAUSE button 19. LOCAL button 20. RANDOM button 25. SEL button 21. ENTER button 26. AUDIO button 22. SYSTEM button 27. VOL+/VOL- buttons 23. BAND button 28. PREVIOUS/NEXT buttons 24.
General operations Reset the unit Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press RESET button (hole) with a pointed object, such as a ballpoint pen, to set the unit to initial state. Note: When some errors occur, you can also press RESET button to resume to normal, and it will erase some memorized functions. Turning the unit on/off Press any button on the panel or the RC (except OPEN button) to turn on the unit.
between the left and right speakers. Fader is to adjust the balance between the rear and front speakers. After you have reached your desired effect, leave the unit idle in order for the new setting to take effect. Note: If the equalizer is set on, bass and treble are not adjustable. EQ modes Press repeatedly SELECT button on the panel or SEL button on the RC until the display shows EQ OFF.
COLOR1 (green button backlight) and COLOR2 (red button backlight). After you have reached your desired effect, leave the unit idle in order for the new setting to take effect. TFT on/off Press POWER/TFT OFF button on the panel to switch the TFT display off. Press the button again to switch the display on. AUX in jack AUX-in jack is intended for connecting external audio equipment to amplify the sound.
Radio operations Band select Press repeatedly BND/NP button on the panel or BAND button on the RC to select your desired radio band in Radio mode: FM1, FM2, FM3, AM1 (MW1), AM2 (MW2). In each set of the bands you can store up to 6 preset stations, making total 30 preset memory stations. Auto/Manual tuning Manual tuning: Press PREVIOUS/NEXT buttons on the panel or on the RC to manually adjust the radio frequency.
Local radio station search Press repeatedly SELECT button on the panel or SEL button on the RC until the display shows LOC ON (LOC OFF). Press VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to select between LOC ON/OFF. LOC ON means that only local stations are received; LOC OFF means that both local and distant stations with weak and strong signal are received. Or press LOCAL button on the RC to switch between local and distant station reception.
Press PTY/PLAY/PAUSE button to show the music type. Then press 1 - 6 number buttons to choose different music programs available. Press PTY/PLAY/PAUSE button twice to show the speech type program. Then press 1 - 6 number buttons to choose different speech programs.
TV operations TV and audio system Press repeatedly SYSTEM button on the RC or BND/NP button on the panel to select one of the available TV systems. Press repeatedly AUDIO button on the RC to select one of the available sound systems. Search channels Press AUDIO TYPE/APS button on the panel or AMS button on the RC to automatically search and save all available TV channels. Press and hold PREVIOUS/NEXT buttons on the panel or RC to adjust the current frequency step by step.
Disc/USB/SD/MMC operations Insert/Eject disc Open the front panel and insert a disc into the disc slot with label side up. The disc will be automatically loaded into the unit. The first file in the root folder will be played. Close the front panel. Open the front panel and press EJECT button to eject the disc from the slot. If the disc is not removed from the slot within several seconds, it will be automatically loaded into the slot again.
Play/Pause/Stop During playback press PLAY/PAUSE button on the RC or press and hold 6/SET/PAU button on the panel to pause playback. Do this operation again to resume playback. To stop playback, press STOP button on the RC or press and hold 5/STOP/ENTER button on the panel. Selecting tracks/chapters During playback press PREVIOUS button on the panel or on the RC to play the previous track/chapter (depending on the format). Press NEXT button on the panel or on the RC to play the next track/chapter.
needed settings. Press ENTER button on the RC or 5/STOP/ENTER button on the panel to start playback from the set number or time. Programming the playback Press PROG button on the RC to open program menu. Use cursor buttons to select the program position and use number buttons to input the desired track/title/chapter (depending on the disc type). Press PLAY/PAUSE button to start program play, or move the cursor to select PLAYING and press ENTER button on the RC or 5/STOP/ENTER button on the panel to play.
Changing angle (for DVD only) Press ANGLE button on the RC to playback images at different camera angles. If a disc doesn’t support multiangle playback, this function will not work. Selecting audio language (for DVD only) During DVD disc playback, press AUDIO button on the RC repeatedly to select the audio language to listen. This function will not work if a disc does not support multi-language audio.
USB/SD/MMC notes USB format supports 2.0. Capacity: up to 32 Gb. For correct and satisfactory operation, licensed SD/MMC memory cards of famous brands should be used with this unit. Avoid using memory cards of unknown brands. Capacity: up to 32 Gb. Inserting SD/MMC card/USB device Insert an MMC/SD card or a USB device into MMC/SD slot or USB slot. Then the playing mode will be changed into Card or USB mode automatically. The first card/USB device track playback will start.
System setup Press SETUP button on the RC or 6/SET/PAU button on the panel to display setup screen, use UP/DOWN cursor buttons to select the desired setup page: System, Disc. Press RIGHT cursor button to go to the selected page item list. In the selected page select an item using UP/DOWN cursor buttons, then press ENTER button on the RC or 5/STOP/ENTER button on the panel to go to setting list. Use UP/DOWN cursor buttons to select the needed setting.
Handling compact discs Do not insert anything other than a CD into the CD loading slot. Do not use cracked, chipped, warped, or otherwise damaged discs as they may cause skipping or noise damage the player. Handle the disc only by the edges (as shown in the picture). To keep discs clean do not touch its surface. Store discs in their cases when not in use. Do not expose discs to direct sunlight, high humidity, high temperature or dust.
Troubleshooting guide Below is a table describing simple measures that can help you eliminate most problems likely to emerge when this unit is in use. If below measures do not help, turn to a service center or to the nearest dealer. Symptom Cause Solution No power The car ignition is not on. If the power supply is properly connected to the car accessory switch the ignition key to “ACC”. The fuse is blown. Replace the fuse. Volume is in minimum. Adjust volume to a desired level.
Temperature inside the car is too high. Cool off until the ambient temperature returns to normal. The built-in microcomputer is not operating properly. Reset the unit with the help of RESET button. Front panel is not properly fix into its place. Install the front panel properly. The radio does not work The antenna cable is not connected. Insert the antenna cable properly. The radio station automatic tuning does not work The signals are too weak. Select stations manually.
Specification General Power supply Current consumption Maximum power output Dimensions/Net weight Temperature range FM stereo radio Frequency range Preset stations MW Section Frequency range Preset stations TV Tuner Color system Disc player Supported storages Supported formats ESP Mounting angle Display Display Aspect Ratio Resolution Brightness Contrast View Angle 12 V DC 10 A 4 x 50 W 178 x 51 x 178 mm/2 kg -200C - +600C 87.5 – 108.
! . , . ............................................................................................................................................................ 31 ............................................................................................................................... 32 ........................................................................................................................................... 34 ...................................................................
, . . 1 1. . . , , . , , . . . , . , . 20 . , , . . . . . , . , , , . . , . . .
, , , . , . , , . 33 , . .
1. 2. 3. 4. 5. ISO6. 7. 8. 9.
, , . , . , , , . . , . , , , ), , « »( , , . « »( , 35 , , . . 30°, . « » DIN, « » ).
« 1. 2. 3. 4. 5. 6. 7. 8. . ) 2. . , , , . . . . ( . , 3. 5. ) . 1. 4. »( . . .
– – – 1. 2. . ). 3. , ). , ( . ( . , , . , ( .). « . 1. 2. 3. 4. 5. (3) ( : (2) ). »( ) . , . , , . . . .
. , . . : , : . , . , . : . , , OPEN, . . . . , . . . . , 38 , , . .
: . 39 , .
ISO 1. ISO, . 2. ISO , . , , . A 1 2 3 4 5 6 7 8 B (+)--(-)--(+)--(-)--(+)--((-)--(+)--(-)--- 12 (+)/ .
, . . , ( , ; ) , . .
1. PWR/OFF/TFT 2. MOD/MUT 3. 1/OSD/LEFT 4. PREVIOUS 5. 2/RPT/RIGHT 6. NEXT 7. 3/INT/UP 8. PTY/PLAY/PAUSE 9. AF 10. TFT11. OPEN 12. USB13. SELECT/ 14. BND/NP 15. 4/RDM/DOWN 16. CLK 17. 5/STOP/ENTER 18. APS/TYPE/AUDIO 19. 6/SET/PAU 20. TA 21. 22.
OPEN, 1. 2. 3. 4. 5. ( . SD/MMC ) RESET EJECT RESET , , 43 . .
( 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 1. 2. SETUP POWER ANGLE ZOOM STOP PROG STEREO REPEAT AMS TITLE OSD ( SLOW MODE SUB-T MEN/PBC PLAY/PAUSE LOCAL RANDOM ENTER SYSTEM BAND MUTE . ) ) 25. 26. 27. 28. 29. SEL AUDIO VOL+/VOLPREVIOUS/NEXT GOTO . CR 2025 3 44 (+) .
( , ) RESET . : . VOLUME . : , MODE => => USB => , . ( POWER/TFT OFF OPEN), MOD/MUT => AUX. USB , MOD/MUT MUTE ON. . . RESET . . : ( MUTE VOL+/VOL- .
SELECT ) =>TRE ( BAS ( => FAD ( SEL ) => BAL ( VOLUME : , ). VOL+/VOL- , , . SELECT SEL VOL+/VOLVOLUME : POP => ROCK => CLASS => FLAT => EQ OFF ( , . OFF. ON (OFF). SELECT (ON) CLK , VOL+/VOL; , . SEL VOL+/VOL(OFF) , . , VOL+/VOL- . , VOLUME . . , 46 . VOLUME SEL . : ) . . EQ ).
Beep SELECT ON (OFF). BEEP ON ( BEEP OFF ( , COLOR1 (COLOR2). SEL VOLUME ), SELECT COLOR1 ( VOLUME POWER/TFT OFF . SEL ) , ) COLOR2 ( , VOL+/VOL- ). . AUX AUX . . . BEEP . . , VOL+/VOL- .
BND/NP 3 FM- : FM1, FM2, FM3 : . : . : MW1 (AM1), MW2 (AM2). ( 30 ). 6 PREVIOUS/NEXT CH+/CHPREVIOUS/NEXT , , , , . . : . SCAN ON. 6 , : . AUDIO/TYPE/APS INTRO ON. 48 . . , . . . 5 BAND W (AM) . 6 AMS 2 AUDIO/TYPE/APS 1~6. AMS .
( FM SELECT (ST OFF). ) SEL VOLUME (ST ON) (ST OFF). STEREO , . ON (LOC OFF). OFF ( SELECT LOC ON ( ). RDS RDS ( , SEL VOLUME , ST ON . VOL+/VOL- ; LOCAL , VOL+/VOL- ) , LOC , DLOC LOC/DX. ) AF ( . , . RDS ) , AF, AF RDS . . . 49 , . AF. , , AF.
TA ( ) TA. , TA; FM- . PTY ( , . ; , ) PTY/PLAY/PAUSE, 1-6, PTY/PLAY/PAUSE 1-6, TA. , TA. . RDS, . , ), Easy ( ), Light ( Other ( ), Jazz ( ), Country ( ), Nation ( ), News ( ), Affairs ( ), Sport ( ), Educate ), Culture ( ), Weather ( ), Social ( ), Religion ( ), Leisure ( ). PTY , . , , 50 ( . . : Pop ( ), Classics ( ), Oldies ( ), Info ( ), Science ( ), Finance ( ), Phone IN ( ), Document ( . . ), Rock ( ), ), Folk ), Drama ), Varied ), Children ), Travel ; . .
SELECT VOL+/VOLTA SEEK/TA ALARM: . PI SOUND/MUTE: PI sound: , TA SEEK TA; TA ALARM: . PI . RETUNE L/RETUNE S: «RETUNE» . «S» TA TA SEEK. MASK DPI/MASK ALL: ), , . MASK DPI . MASK ALL RDS. . SEL VOLUME . , . , , . , PI, . PI mute: ; «L» . , Retune AF ( , MASK DPI.
SYSTEM . AUDIO BAND/NP , APS/TYPE/AUDIO , . , . . AMS . PREVIOUS . . PREVIOUS/NEXT .
/USB/ . . , : , MP3/DivX/JPEG, 1. : 2. 3. 4. , , SD/MMC AVI- . . EJECT. , . . . AVI MP3/DivX/JPEG : ( ) 53 . .
5/STOP/ENTER : 1. 2. STOP 5/STOP/ENTER ; . MEN/PBC . 6/SET/PAU , , , PLAY/PAUSE , 5/STOP/ENTER (0-9) . ENTER . ). . . PREVIOUS NEXT PREVIOUS . NEXT : x2 => x4 => x8 => x20 => PLAY/PAUSE . 54 ( . PREVIOUS PTY/PLAY/PAUSE , STOP . .
2/RPT/ ( ). REPEAT . , 3/INT/ , , , , . , . » « . ( , », 5/STOP/ENTER PROG, 55 5/STOP/ENTER . . ). , , ENTER 5/STOP/ENTER . , , , PLAY/PAUSE, , , PROG, « 4/RDM/ . . ENTER . . . RANDOM GOTO; , ENTER .
OSD 1/OSD/ , ( ). => X1/3 => X1/4 => ZOOM : X2 => X3 => X4 => X1/2 . . SLOW , : 1/2 => 1/3 => 1/4 => 1/5 => 1/6 => 1/7 => 6/SET/PAU . PBC ( MEN/PBC , ( DVD) ANGLE , , VCD- , , , )( , VCD) . PBC. PBC. . , . ( DVD) AUDIO . 56 PLAY/PAUSE . .
, => . SUB-T ( DVD) VCD AUDIO/TYPE/APS CD (NTSC/PAL/PAL60/ ( DVD) MEN/PBC ENTER . ID3- MP3 USB: SD/MMC: AUDIO , 5/STOP/ENTER TITLE => BND/NP . . . , ID3-tag, . USB/SD/MMCUSB 2.0. : SYSTEM ). , DVD : . . : 32 . . . 57 : 32 .
USB/SD/MMCUSB , . USB , , MOD/MUT USB SD/MMC . USB- « 58 . . MODE , ».
SETUP 6/SET/PAU : , , 5/STOP/ENTER . . NTSC/PAL: : 4:3 PS: 4:3 LB: . (NTSC, PAL, PAL60, , , . : : . 6/SET/PAU , . 16:9. : : DVD : . . . . : ). 4:3. 4:3, . 16:9 wide: 0000. . ENTER SETUP . DVD . . . 0000 , 59 . , .
, . . . 60 , .
, ( , . , . , . , 3 . . , ( , 3 , . (8 ). , . ), . . , . , , . , . , . , ( ). , . ). , . , , . .
, , , . , . , “ ”. . . . . . . 30 . , . . 30 . , . . . . , . .
. . , . . . RESET. . . . . . .
SECAM/PAL/NTSC DVD/DVD±R/DVD±RW, CD/CD-R/CD-RW, USB, SD/MMC DVD-video/DVD-audio/SVCD/VCD/CDDA/HDCD/MP3/PictureCD/Photo-CD/JPEG/MPEG4 (DivX/XviD) 8 DVD, 40 CD, 120 c MP3 0 - +/-300 316:9 320 (RGB) 2 300 400:1 120° . 240 . ! 2019) TFT , . .
