SM-CMMD7000 MULTIMEDIA DVD RECEIVER WITH MOTORIZED 7” TFT DISPLAY Instruction manual DVD- 7” TFT- 1
Dear customer! Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents...................................................................................................................................... 2 Important safeguards .........................................................................................
Important safeguards Using the device at temperature below -10º may cause the breakage of the device. BEFORE USING PLEASE HEAT UP THE PASSENGER COMPARTMENT TO THE RECOMMENDED TEMPERATURE! Read carefully through this manual to familiarize yourself with this high-quality sound system. Disconnect the vehicle's negative battery terminal while mounting and connecting the unit. When replacing the fuse, be sure to use one with an identical amperage rating.
Accessories 4
Installation/connection This unit can be installed in any dashboard having an opening as shown on the picture. The dashboard should be ~ 4.5 – 5.5 mm thick in order to be able to support the unit.
Installation using the screw holes at the sides of the unit. Select a position where the screw holes of the mounting bracket supplied with the car and the screw holes of the main unit become aligned (are fitted), and tighten the screws (see (4) at 2 places on each side). And then fasten them to the car. Note: Outer Trim Frame (5) and Mounting Sleeve (1) are not used for installation method.
Electrical connection Note: For your driving safety, please link your Braking signal wire with low power level, and keep it controlled by manual brake switch. Wire should be high power level and the unit cannot play video disc.
Caution: For some car models you may need to modify wiring of the supplied power cord. Contact your authorized car dealer before installing this unit. Using the ISO Connector 1. If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated. 2. For connections without the ISO connectors, check the wiring in the vehicle carefully before connecting, incorrect connection may cause serious damage to this unit. 3.
Unit controls Monitor 1. BACKSPACE button 2. ANGLE+/- buttons 3. MENU button Brief press to set DVD menu during playback mode, brief press it to set the radio menu during radio mode. Hold and press to set the main menu. Front panel 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Vol+/ Vol -/Sel button SRC button Brief press to select radio mode or playback mode, hold and press it to turn the unit on or off.
Remote control 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26.
Changing the battery 1. Press the catch and at the same time pull out the battery tray (pic. 1). 2. Insert the 1 x lithium battery, type CR2025 (3V) battery with the stamped (+) mark facing upward. Insert the battery tray into the remote control (pic.2). Pic. 1 Pic. 2 Warning: Store the battery where children cannot reach. If a child accidentally swallows the battery, consult a doctor immediately. Do not recharge, short, disassemble or heat the battery or dispose it in a fire.
General operations Reset the Unit Operating the unit for the first time or after replacing the car battery, you must reset the unit. Remove the front panel at first, and then press RESET button on the panel with a pointed object, (such as a ballpoint pen) to set the unit to initial state. Note: When some errors occur on the display, you can also press RESET button to resume to normal, and it will erase the clock setting and some memorized functions. This function can only be operated by the head unit.
Turning Loudness On/Off Keep pressing LOUD button on the RC or on the front panel to activate loud function. You can press this button to increase the low frequency, which can improve sensitivity for your ears. Keep pressing it again to quit this function. Eject a Disc Press EJECT button on the RC or on the front panel to eject or insert a disc. Open the Monitor Press OPEN button on the front panel to slant the monitor, press and hold it again, the monitor will return to initial state.
Main menu Note: This unit can be operated by touching the screen buttons. Thus you can select the menus and change the parameters. When the unit is on, the monitor will display main menu. Press and hold SETUP button on the remote control or MENU on the head unit, or press MENU on the monitor to enter the menu. This menu includes AUDIO, VIDEO, SOURCE, SYSTEM, EXIT. Press them on the monitor to set the desired status.
Audio Adjust You can adjust VOLUME, BALANCE, FAD, BASS, TREBLE. For example, press FAD, the setting menu will appear. Press and buttons to adjust the desired FAD level, press EXIT to exit this menu. Note: Adjusting the other options perform the same operation. Video Adjust In this menu you can adjust CONTRAST, COLOR, TINT, BRIGHT, PICTURE.
Source Adjust You can adjust RADIO, DVD, AUX and TV to ON or OFF, press the corresponding button to set. If one of them was set OFF, that function is not available. For example, set the RADIO OFF, pressing SOURCE can not activate reception of radio. System Adjust In this menu you can adjust CLOCK SYS, KEY BEEP, MONI FLEX (monitor flex), REVER POLA (reverse polarity), SUBWOOFER, AMS FULLUP, LOCAL AREA, LOCAL, GOTO FREQ, ADJ SCREEN, CLOCK ADJ.
Subwoofer In this menu you can adjust SUBWOOFER settings, press it and select ON or OFF, the default setting is ON. AMS Fullup In this menu you can set the modes of AMS. When the setup is ON, the presettable stations are full, New one’s are not allowed. When you select OFF, it will search continually. Local Area You can select EUROPE, OIRT, FM ONLY to search the stations quickly in your current area, also, you can select FM ONLY to receive the FM stations only.
Radio setup 1. Band Indicator Shows which band the radio is tuned to. 2. Preset Number Indicator Shows what preset has been selected. 3. Frequency Indicator Shows which radio frequency is tuned. 4. SEEK+/SEEKBriefly press to tune by the presettable range, hold and press to tune automatically. 5. VOL+/VOLPress to increase or decrease the volume. 6. BAND Press to select the bands. 7. AMS Briefly press to scan the current station, hold and press to tune automatically. 8.
Manual/Automatic Tuning Manual Tuning: Press / buttons on the remote control, / buttons of the front panel or SEEK-/+ on the monitor continuously to select a station downward or upward respectively. Automatic Tuning: Press and hold / buttons on the remote control, / buttons of the front panel or SEEK-/+ on the monitor for more than 3 seconds, the radio automatically searches a station downward or upward respectively and plays when it finds a station.
Note: The unit can be stored up to 6 stations for each band. On Screen Display During radio mode, keep pressing OSD button on the remote control or DISP button on the front panel to display the current mode. RDS Setup 1. AF Press it to activate AF function. 2. Press it to activate TA function. 3. / Press it to select PTY code. 4. PTY Press it to activate PTY function. 5. During PTY ON, press this button to search the playing track type. 6. Displays the RADIO TEXT of the RDS station. 7.
Alternative Frequencies Briefly press AF/EQ button to activate the auto searching station function. When AF is on, the RDS signal is week or there is no it at all, it will be found in the presetted frequencies and the whole bands. Traffic Alarm Briefly press TA/LOUD button activate the traffic alarm function. When AF is on, the TA displays on LCD, or else, if there is no TP information, the mode will search TP station automatically. The TA is green when it is played by a station, if not, it is white.
Disc operations Discs for playback This unit can play disc types: DVD/DVD±R/DVD±RW/CD/CD-R/CD-RW Compatible with formats: DVD/SVCD/VCD/CDDA/MP3/WMA/HDCD/ Picture-CD/JPEG The following file types are supported: Audio files: MP3 (*.mp3) WMA (*.wma) Video files: MP4 (*.avi, DIVX3.11/4.0/5.0/6.0 and XVID) MPEG 2(*.vob) MPEG 1(*.dat) Picture file: JPEG (*.jpg) ISO 9660 or ISO 9660 +Joliet format - Max. 30 characters Max. Track number is 448 Max. nested directory is 8 levels The max. album number is 99 The max.
DVD operations Glossary PBC (PlayBack Control) PlayBack Control is a menu recorded on the disc with SVCD or VCD2.0 format. For the discs contained PBC, it can playback interactive software with the menu displayed on TV. And if the disc contains still images, it can playback high definition of still image. Title The title is the important part of DVD disc. The memory volume of the disc is rather big, that makes possible to record several films on one disc.
Stop the playback Press STOP button, then press ENTER or PAUSE button on the remote control or on the monitor to resume playing. Fast rewind/forward Press / buttons on remote control or on the monitor, / on the unit to perform fast rewind or fast forward. Number Buttons Press one of the Number Buttons (0~9) to select a track, it will be played automatically.
DVD Playback Setting Press GOTO button to set the playing time: chapter/audio/subtitle/angle /title time/chapter time/repeat playing /time option. Press / buttons to select the options, press ENTER to set the status. Then press Number Buttons or / buttons to set the current status. Press GOTO button to exit. Changing the viewing angle (Multi-angle) With DVDs featuring multi-angle (scenes shot from multiple angles) recordings, you can press PTY/ANGLE button to switch among viewing angles during playback.
DVD Setup menu 1. 2. 3. 4. 5. Press SETUP button on the RC or MENU button on the unit to enter the setup menu. Use the buttons to choose the setup page: General page, Preference page, Password setup page, Exit. Press the button to enter the setup page selected. Use and buttons to select the option you want to adjust. Press button to enter the adjustment list. Use the and buttons to select the adjustment and press ENTER button or MENU button on the unit to confirm. 6.
Preference setup TV TYPE This unit is suitable for all kinds of TV systems. You can select one of the PAL, NTSC or Multi. Auto: the TV system is auto switched according to the disc system. NTSC: this system is used in USA, Taiwan, Japan etc. PAL: this system is used in China, Europe, Hong Kong etc. AUDIO, SUBTITLE, DISC MENU Set the desired languages for all the settings. If a setting is supported by disc content, it will work. Otherwise the disc default value works.
Password setup page The password option is initialized as locked, and you cannot set the ratings limit or change the password. In order to the Parental feature works, the password mode must be turned on. If you want to set the ratings limit, you will need to enter the default password, which is 8888, then press ENTER to confirm. To change the password, enter the Password change submenu. Use the cursor buttons to select the desired field.
VCD/CD operations Playing a VCD/CD Insert a VCD/CD disc into the disc slot, the unit will automatically switch on, if a disc is loaded, press SOURCE to start the playback. To eject a VCD/CD press EJECT button on the unit, on the remote control or the monitor. Previous/next track Press / buttons on the RC or on the monitor, / on the unit to play the previous/next track.
System Switch Press P/N button on the remote control to set the TV standard to PAL or NTSC or AUTO system. Slow motion playback Press button to slow the playback. Changing the size of the picture Press ZOOM button to increase the picture in size. Each pressing increases the size until the maximum size is reached. On Screen Display Briefly press OSD button and the display will show: Single elapsed => Single remain => Total elapsed => Total remain =>.
PBC Selector During VCD mode, press TITLE button, the PBC playback starts and the menu of entire disc appears on LCD. And then you can select your desired track using Cursor or Number Buttons. When a track is playing, you can press MENU to return to the video file menu, if you would like to select others. To cancel PBC playing, press TITLE button again. Note: This function is only available if discs support PBC version 2.0 or above.
MP4 Disc operations Note: When playing *.AVI files some sound distortion is possible in case the sound is coded in PCM format. Insert an MP4 (AVI,MPEG4) disc into the disc slot, the unit will automatically switch on, if a disc is loaded, press SOURCE button to start the playback. To eject a VCD/CD press EJECT button on the unit, on the remote control or on the monitor. Number Buttons you can select any tracks directly using Number Buttons ( 0~9). The track you selected will be played automatically.
Setting the Playback Time Press GOTO button, and the monitor will show: —-:-—,enter your desired time of the playback using number buttons. and press ENTER to set the status. Press GOTO button one more time, and the monitor will show: -—:—-:—-, enter your desired time, then press ENTER. Previous/next track Press / buttons on the RC or on the monitor, / on the unit to play the previous/next track.
MP3 Disc operations Playing an MP3 Disc Insert an MP3 disc into the disc slot, the unit will automatically switch on, if an MP3 disc is loaded, press SOURCE to start the playback. During MP3 playback, the track information displays on LCD. When playing a disc included PIC file, press STOP button, then press to select the option. Note: Press EJECT button to eject the disc. Previous/next track Press / buttons on the RC or on the monitor, / on the unit to play the previous/next track.
Fast rewind/forward Press / buttons on remote control or on the monitor, / on the unit to perform fast rewind or fast forward. On Screen Display Press and hold OSD button on the RC or DISP button on the unit to display the current setup. MP3 overview MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard. This product allows playback of MP3 files on DVD-R/-RW, DVD+R/+RW, CD-ROM, CD-R/-RW discs. The unit can read MP3 files written in the format compliant with ISO 9660.
TV tuner operations TV Touch Screen Menu Press SRC to switch to TV mode: / Previous channel, Next channel. VOL- To decrease volume level. VOL+ To increase volume level. Note: Press the screen to turn out this menu. CH03: The current channel. 65.75 MHZ: The current frequency. AV SET Audio Adjust In this menu you can adjust audio settings. Video Adjust In this menu you can adjust video settings. TV SETUP menu 1. / Select stations upwards or downwards. 2. Station Selector. Select 1 to 30 stations. 3.
7. EXIT TV Channel Selector Press number buttons on the RC or on the monitor, press buttons on the RC or on the unit to select the TV stations, press 1 to 9 button to select the stations directly; press GOTO button to select more than 10 stations, then press the corresponding number. Note: Press in the monitor also performs the same function. Frequency Searching Keep pressing / buttons on the RC, on the unit, or on the monitor to select the frequency upwards and downwards.
Handling and cleaning discs Dirty, scratched or warped discs may cause skip ping or noise. Handle the disc only by the edges. To keep clean do not touch its surface. Discs should be stored in their cases after use to avoid scratches. Do not expose discs to direct sunlight, high humidity, high temperature or dust. Prolonged exposure to extreme temperature can wrap the disc (such as leaving the discs in your car during summertime). Do not stick or write anything on either side of disc.
Troubleshooting guide Symptom Cause Solution No power. The car ignition is not on. The fuse is blown. If the power supply is properly connected to the car accessory switch the ignition key to “ACC”. Replace the fuse. Disc cannot be loaded. Disc cannot be read. Presence of disc inside the player. Remove the disc in the player then put a new upward. Insert the compact disc with the label facing upward. Clean the disc or try to play a new one. Cool off until the ambient temperature returns to normal.
Specification General Power supply: Current consumption: Maximum power output: Compatible disk types: Compatible formats: Dimensions (L x W x H)/weight: Working temperature range: ESP function: 12 V DC max. 10 A 50 W x 4 channels DVD/DVD±R/DVD±RW/CD/CD-R/CD-RW DVD/DVCD/SVCD/VCD/CDDA/MP3/WMA/HDCD/MPEG4 (DivX)/Picture-CD/JPEG playback 178 x 50 x 190 mm / 2.6 kg -10º - +60º 40 sec. for Audio CD, 120 sec.
Preset memory stations: 12 TV Tuner Signal System Tuning Range SECAM/PAL/NTSC 48.25-863.25 (MHz) Specifications are subject to change without notice. Mass and dimension are approximate.
! . . , ......................................................................................................................................... 42 ........................................................................................................................ 43 ................................................................................................................................ 44 .........................................................................................................
-10º . ! , . . , , . , . . , , . , . , . , , , . . , , . , , , , , . . , . , . . , .
1 . 1 1 . 1 . . 4 4 . 1 1 44 . .
, . , ~ 4,5 – 5,5 .
, , . : .
1. 2. 3. 4. 5. : , . , . .
: . . ISO 1. ISO, , . 2. ISO , 3. . , . A 1 2 3 4 5 6 7 8 12V(+)/ B 9 10 11 12 13 14 15 16 48 . . ./ . . . .
1. 2. 3. BACK SPACE ANGLE+/MENU DVD, . . 4. 5. VOL+/ VOL -/SEL SRC. . . 6. 7. MUTE BAND ( / ) 8. AF/EQ 9.
10. 11. 12. 13. 14. 15. 16. 17.
( 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. AF/EQ SOURCE GOTO BND/TITLE AMS/MENU LOC/SUB-T ST/AUDIO OSD PTY/ANGLE [ ] SLOW ZOOM PROG P/N VOL+/VOLMUTE TA/LOUD EJECT 0-9 CLEAR ENTER; [ ]/[ ]; SETUP [ ] PAUSE [ ] STOP RPT RDM SEL ) [ [ ]/[ ]/[ ]/[ ]/[ ].
: 1. 2. , (CR 2025 3V), . . . : . , . ( ). . .
, , ); . RESET ( . : RESET . . PWR , SRC , . . 0,5 . , . SEL : BALAN => FAD => BASS => TREBLE => VOLUME =>. VOL+/VOL, . , , EQ. EQ : POP – CLASS – ROCK – EQ OFF. VOL+/VOL. (LOUD) LOUD , . EJECT OPEN , , , . . . 53 LOUD.
. . ANGLE . MUTE . MUTE. MUTE. CLEAR . SOURCE . « , DVD»/« , » ENTER , UP/DOWN . MENU. BACK. , . , SOURCE , , 3 .
: . . , . SETUP MENU MENU , . : AUDIO, VIDEO, SOURCE, SYSTEM, EXIT. .
AUDIO ( ) AUDIO BALANCE ( , , ), FAD, BASS ( FAD VOLUME ( TREBLE ( ) ), ). . , FAD, EXIT, . : . VIDEO ( ) ), COLOR ( ).
3. SOURCE ( ) OFF ( RADIO, DVD, AUX TV ON ( ) . OFF RADIO OFF, . ) . SOURCE , 4. SYSTEM ( ) CLOCK SYS, KEY BEEP, MONI FLEX, REVER POLA, SUBWOOFER, AMS FULLUP, LOCAL AREA, LOCAL, GOTO FREQ, ADJ SCREEN CLOCK ADJ. CLOCK SYS ( ) CLOCK SYSTEM 24) 12KEY BEEP ( . ; , ON ( . MONI FLEX ( ) OFF ( ); - ON, ) . MANUAL ( ) AUTO ( ). . – AUTO; : . REVER POLA ( ) .
+12 V, . SUBWOOFER ( BATTERY . 0 V, GROUND ) ; ON OFF; - ON. AMS ( AMS) AMS. . , LOCAL AREA ( ONLY LOCAL ( ) EUROPE, OIRT ON ( OFF ( ) ) . FM , FM FM. ) ; OFF ( ; ON ( ) ) . GOTO FREQ ( ON ( ) ), GOTO . ADJ SCREEN ( ) ADJ SCREEN . : please press the button (« 2. 1, 3 CLOCK ADJ ( .( 4 ). . 58 »). 2, SAVE.
1. , . 2. . 3. , . 4. SEEK+/SEEK; . 5. VOL+/VOL. 6. . 7. AMS ; . 8. MENU , . 9. SRC . 10. 6 , . ; , 6 11. RDS , RDS SETUP. 12.
: / , / , SEEK-/+ . , : SEEK-/+ 3 / , / , . DX/LOC LOC/SUB-T LOC ON; . , . , : . AM. , / . MO/ST ST/AUDIO . ST ON. ST OFF. FM. : AMS/MENU , , AMS 60 ; (1 – 6).
, AMS/MENU . AMS , . 2 AMS/MENU AMS , . (1 – 6). 2 : . 6 . OSD DISP . RDS 1. 2. 3. 4. 5. AF – – / – PTY – AF. TA. PTY. PTY. PTY . 6. 7. 8. 9. 10. RDS. PS – SEEK+/SEEK- PREV – EQ – , , 11. LOUD – RDS. . . . LOUD. AF/EQ . ; 61 AF RDS .
Traffic Alarm TA/LOUD . Traffic alarm. TP AF, «TA» TP. , , «TA» ; TA . . ( ., DVD, AUX), TA, , RDS. . PTY/ANGLE PTY, , PTY SEARCH. PTY RDS . PTY. PTY ON; PTY CODE PTY , UP/DOWN . PTY OFF, . : RDS . TA/LOUD , RDS .
: DVD/CD-R/-RW/DVD±R/±RW. : DVD/SVCD/VCD/CDDA/MP3/MP4/WMA/HDCD/Picture-CD/JPEG/. : : MP3 (*.mp3) WMA (*.wma) : MP4 (*.avi, DIVX3.11/4.0/5.0/6.0 and XVID) MPEG 2(*.vob) MPEG 1(*.dat) : JPEG (*.jpg) ISO 9660 + Joliet 30 . – 448. -8 . – 99. - 99 59 . MP3 : 8 48 ( 44,1 ). P3 : 32 - 320 ( 128 ). : *.ACC, *.DLF, *.M3U, *.PLS, MP3 PRO, DRM. . ISO 9660 : .
DVD , PBC SVCD VCD , . , " DVD- , , ". DVD- , , . . SVCD, VCD CD. . DVD DVD SOURCE , DVD , . . DVD EJECT . ; : DVD SETUP DVD / / .
DVD STOP. ENTER PAUSE . / , / . : (0 – 9) DVD ; RPT . ; : P/N , DVD : 65 PAL, NTSC AUTO.
DVD DVD . . ZOOM : . OSD : => => => OSD => .. DISP . DVD GOTO, DVD : ./ , DVD ANGLE / . . ( GOTO. Multi-angle) multi-angle ( ), . : multi-angle. . ENTER / . DVD , 3 , 66 .
( Multi-audio) DVD . AUDIO AUDIO 1 => AUDIO 2 : . , ( multi-audio. Multi-subtitle) DVD , SUB-T . : Subtitles 1 — Subtitles 2 — Subtitles OFF : . 1. MENU DVD multi-subtitle. AMS/MENU, ; ENTER 2. DVD BAND/TITLE, . . ; ENTER . .
DVD 1. SETUP . , . 2. : , , SETUP DOLBY, . 3. 4. 5. . , . . ENTER . 6. 7. . SETUP BACKSPACE , : . . 4:3 PS: , , . 4:3 LB: , , . 16:9: , . . , . SUBTITLE , . - , , 68 .
, . . PAL: NTSC: : , , , . . , , . , , . , , . . ST/AUDIO LOC/SUB-T – . . , , , . , 1 8 - , , : . . . . 69 .
, . , 8888), ( ENTER. , . ( , 8888 (4 ). . ENTER, , ), , . , .
VCD/CD VCD/CD ; SOURCE . . VCD/CD , EJECT / , , . / . RPT ; , . RDM , . . (0-9) . STOP. ENTER PAUSE . PAUSE ( .
/ , / . P/N : , PAL, NTSC AUTO. . : ZOOM : . . OSD => . : => => 72 => .
OSD DISP . GOTO; « »: —-:—- . . GOTO, « », . GOTO, V D : . / , . ENTER / . GOTO. VCD AUDIO : PBC VCD, . TITLE, PBC . MENU, PBC . : VCD/CD , ENTER , TITLE. , PBC 2.0 PROG; . . , START. .
, EXIT ENTER. ENTER; ENTER. STOP PROG . CD-R 44,1 128 ISO 9660, ( ). CD-R MP3 CD-R CD-RW , , CD-RW, MP3 3 . 256 3 . 8, , . , . 3 CD-R 3 3. , CD-RW . CD-R CD-RW , . . 16 , . 1. ID3TAG. , 74 .
MP4 : PCM. *.AVI MP4 (AVI, MPEG4) SOURCE EJECT. ; . . (0-9). . MP4 (AVI, MPEG4) STOP . PAUSE. ( ) MP4 (AVI, MPEG4) PAUSE . . MP4 (AVI, MPEG4) RPT . , . – OSD . : OSD DISP .
GOTO; —-:—- . , . , GOTO, ENTER -—:—-:—-, ENTER. / , / . / , / . MENU PAUSE : . , .
3 MP3 ; . SOURCE . MP3 . , , STOP, . : , EJECT. / , / . RPT . ; (0-9) . STOP, . MP3 GOTO; M 3 GOTO, —-:—- . ENTER ; --:--. . CLEAR 77 .
( ) MP3 PAUSE . / . , / . : OSD DISP . MP3 3 MPEG 3 . DVD-R/-RW, DVD+R/+RW, CD-ROM, 3 CD-R/-RW. 3, 3, 3, 3 , ISO 9660. . , , “.mp3”. “.mp3”, . , ” “ ” “ MP3” “ ”, PC . 8, . 448. . , VBR, 8 , , 3. . VBR: .
SRC, : / . VOLVOL+ . . : , . CH03: 65.75 MHZ: . . 1. 2. / . 1 30. 3. VOL-/VOL+ . 4. SEEK-/SEEK+ ; . 5. SEEK ALL .
6. SYSTEM . 7. EXIT , ; GOTO, 1-9 ; . . 10, : / , , . / , , , .
, . , . , . , , . ( , ). . , , . . . . ( ), . . , , . . , , . .
. , « ». . . CD . , . . . . . . . . . . . RESET. . . . 30 , . 30 . . . . . . . .
12 10 50 ( )/ 4 DVD/DVCD/SVCD/VCD/HDCD/MP3/MPEG4(DivX)/WMA/CDDA/Picture-CD/JPEG DVD/CD-R/CD-RW/DVD±R/DVD±RW 178 50 190 /2,6 -20º - +60º 40 CD, 120 3 7 480 234 16:9 300:1 350 2 PAL/SECAM/NTSC FM 65 6 18 – 74 /87,5 AM 83 – 108
522 – 1620 12 SECAM/PAL/NTSC 48,25 – 863,25 . .
