Manual

Mounting the subwoofer

Installation kits are available from your dealer or local stereo shop to help make your installation easy. These

kits also give your installation a clean, custom appearance. Questions about installations methods please

consult a professional auto sound dealer/installer for assistance.

· Choose the place of installation for the subwoofer. For most subwoofers stipulated regular places in the

automobile approach. In this case you need to know only assembly depth. Before installation the

subwoofer check up its assembly depth.

· Clean any metal shavings from the mounting area and check for areas in which water may enter the

subwoofer cavity. Treat the area for water protection when necessary.

If unit fails to operate properly

· Carefully read the instruction to make sure the unit is being operated properly. Check the following before

you take your unit to the local dealer for repair.

SYMPTOM POSSIBLE CAUSE SOLUTION

The volume control regulator set

in the minimal position

Adjust sound levelNo sound

The audio cassette receiver is

damaged

Take your unit to the local dealer for

repair

Acoustic system cables are

connected without observance of

polarity (+ or -)

Check to see that all the power and

speaker leads are securely connected

Damage speaker wire or speaker Replace the speaker or speaker wires

Unnatural sound

The audio cassette receiver is

damaged

Take your unit to the local dealer for

repair

NOTE: Good ground connections eliminate most electrical noise problems and require tight contact with the

metal vehicle chassis. Remove plastics, paint or rust for good electrical contact.