Owner manual

10
Button functions
STANDBY
When playing, press STANDBY button on the panel or on the RC to turn off the unit, and standby mode will be activated;
Press the button again, to turn on the unit and it will start playing. To switch off the power completely, set POWER switch on
the rear panel to OFF position.
OPEN/CLOSE
Press OPEN/CLOSE button on the RC or on the panel when power is on, the disc tray is pushed out. Put the disc on the tray
with the title faced up. Press the button again to close the disc tray and the unit starts playing automatically (not active for
MP3 discs).
Number buttons
Press number buttons to input digits and numbers (e.g. track/chapter number, playback time etc.).
AUTO SEARCH
In radio mode, press this button to activate automatic search and saving of available radio stations in the band.
ECHO
Press this button repeatedly to increase/decrease echo level or to switch echo on/off.
OSD
Press this button to display various info on the current playback: title/chapter time elapsed/remaining, etc.
ZOOM
When playing DVD, VCD disc, press ZOOM button to zoom in the picture as follows: 2x => 3x => 4x => normal. In zoom in
mode, press cursor buttons to move the picture for viewing.
A - B
Press A-B button at the start point (A) and the ending point (B) to select the repeat fragment. Press A-B button the third
time to cancel fragment repeat and return to normal play.
REPEAT
Press REPEAT button repeatedly to repeat a title/chapter/track/folder/disc (depending on the disc type used).