User Manual
Table Of Contents
13
ENGLISH
REALKIT-touch User manual
23. HEADPHONE - Connect your headphone to this 1/8” TRS output.
24. LINE OUT L/MONO - Left channel of main output. Connect this output to any
amplier using 1/4” TS cable. For mono output, please connect this socket only.
25. LINE OUT R - Right channel of main output. Connect this output to any amplier
using 1/4” TS cable. For stereo output, please connect both LINE OUT L/MONO
(2) and LINE OUT R (3).
26. LINE IN - Analog input socket of the sound module, 1/8” TRS.
TIPS - An extra 1/8” male to male cable will be needed if you want connect
your sound module to any sound source such as iPod, iPad,CD player, mo-
bile phone or computer. Play and practice with your favorite music.
27. EXT1 - Extended trigger socket 1, connect to Crash2 by default.
28. EXT2 - Extended trigger socket 2, connect to Tom4 by default.
29. USB - Connect standard B type USB cable to this socket for updating rmware,
gaming, recording MIDI and using plug-ins for more sound on computer.
TIPS - Connect USB2.0 A male to B male cable to this socket, such cable is
very common in home printers.
30. DC 12V - Connect the attached DC 12V power adapter to this socket.
31. POWER - Turns the module on and off.
TRIGGER INPUTS - Trigger inputs socket is located at the bottom of sound module.
Connect the multi-trigger connector (AKA 25pin connector) to this socket and lock it.