User Manual

ENGLISH

REALKIT-touch User manual

4. BEFORE STARTING PERFORMANCE

• Make sure the drum kit is stable and all the parts are well locked.

• Connect all the cables to the drum module according to their tags.

• Connect the multi-trigger connector to its socket at the bottom of the sound module

and lock it.

• Power the sound module up.

Due to the difference of installation and environment, if

cross talk problem occurs, please follow the following

procedures.

• Press SETUP button.

• Press the PAGE DOWN/UP button until the sub

menu ADVANCE appears.

• Press ENTER button to conrm, then press the

PAGE DOWN/UP button to select item of Xtalk.

• Strike a pad you desire with maximum strength re-

peatedly until “OK” is shown on the screen.

• Then change to another pad and repeat the third

procedure (Not including Hi-hat Pedal).

• Also, you can set the HEADROOM (aka Velocity

Dynamic range) of each pad. To reach a loud sound

easier, simply lower the HEADROOM value.