User Manual

ENGLISH

REALKIT-touch User manual

• Press EXIT to quit, when “Save Setups” appears,

press ENTER to conrm or select No to cancel sav-

ing . The display will show “Save OK” after saving.

Note All the system settings in SETUP is global

parameter, they will affect all the kits and can

be saved even when rebooted. If the adjustment

result is not good, do a crosstalk reset according

to next pages.

5. BASIC OPERATION

TO SELECT A KIT

• Press kit on the control panel and use the scroll

wheel or -/+ button to select a kit.

Select or Change

Tip: While adjusting parameters, you can change

its value by using -/+ buttons or scroll wheel

also.

K I T 1 2 0 4 / 4

Rocker 1

Kit No.

Kit name

Time signatureTempo

S N A R E -R i m

VOICE TYPE SNA RE

Voice category

Part to edit

TO EDIT A KIT

• Press EDIT to enter EDIT MODE, where you can

assign different voices and adjust other parameters

to make your own kit. Strike on different part on each

pad to select among triggers, or use DRUM button to

switch between drum instruments.

• Use PAGE DOWN/UP to enter VOICE TYPE menu

and use scroll wheel or -/+ button to choose a voice

category. Choose “---” for a blank voice.