User Manual

18
ENGLISH
REALKIT-touch User manual
TO RECORD A DRUM TRACK
• Press the record button in KIT mode, set the tempo
for recording, and press the record button again to
start recording.
• Use stop button to pause your recording. You can
either press play button
to continue recording or
press stop button to nish and save your recording.
• While saving your recording, on the screen will show
”Save the song to”, use scroll wheel or -/+ button
to locate the place for saving, and press enter to
conrm.
• If you are in PATTERN mode, you can record along
with demo song.
TO USE THE MIXER
• Press the ALTER button to switch between 3 modes
for faders. In VOL mode, all the faders control the
volume of different pads.
• In FX mode, S1 controls reverb level, S2 controls
compression ratio, and S3-S6 change to a 4-Bank
equalizer.
• In MIDI mode, 6 faders are assigned to 6 different
controllers. You can use them to control track volume
or various effects in any DAWs or plug-ins.
TO RESTORE FACTORY SETTINGS
• Press SETUP, and use PAGE DOWN/UP to locate
RESET menu.
S E T U P
R E S E T K i t s
• Use -/+ or scroll wheel to select what you want to
restore.
Kits: Initialize all the kits, including user kits.
Settings: Initialize all system settings.
Xtalk: Initialize cross talk to default.
Songs: Initialize all user patterns.
All: Initialize everything to factory settings.
• Press ENTER to conrm. The screen will show RE-
SET OK.
• Reboot the module to complete.
----R e s e t O K ----
--------------------