User Manual

ManualsBrandsSoundsation ManualsAudio EquipmentScenemaker 1216 - DMX512 LIGHTING CONTROLLER

Table Of Contents

1. 1. INTRODUCTION
- 1.1. UNPACKING
- 1.2. ACCESSORIES
2. OVERVIEW
3. MAIN FEATURES
4. OVERVIEW
- 4.1. Front Panel
- 4.2. Rear Panel
- 4.3. Common Terms
5. OPERATION GUIDE
- 5.1. Setting up the system
- 5.2. Fixture Addressing
- 5.3. PAN and TILT Assignment
- 5.4. Resetting the System
- 5.5. Copy Scanner
- 5.6. Fade Time Assign
6. OPERATION
- 6.1. MANUAL MODE
- 6.2. REVIEW SCENE OR CHASE
7. PROGRAMMING
- 7.1. Entering Program Mode
- 7.2. Create a Scene
- 7.3. Running a Program
- 7.4. Check a Program
- 7.5. Editing a Program
- 7.6. Copy a Bank
8. CHASE PROGRAMMING
- 8.1. Create a Chase
- 8.2. Running a Chase
- 8.3. Checking a Chase
- 8.4. Edit a Chase
- 8.5. Delete all CHASE Programs
9. SCENE PROGRAMMING (Steps)
- 9.1. Insert a Scene
- 9.2. Copy a Scene
- 9.3. Delete a Scene
- 9.4. Delete all Scenes
10. PLAYBACK
- 10.1. Running in Sound Mode
- 10.2. Running in Auto Mode
- 10.3. Blackout
11. MIDI OPERATION
12. APPENDIX
- 12.1. DMX Introduction
- 12.2. Building a Serial DMX Chain
- 12.3. DMX Terminator
- 12.4. 3-Pin vs 5-Pin DMX cables
13. SPECIFICATIONS
14. WARRANTY AND SERVICE
15. WARNING
1. INTRODUZIONE
- 1.1. DISIMBALLAGGIO
- 1.2. Accessori
2. PANORAMICA
3. CARATTERISTICHE PRINCIPALI
4. INTRODUZIONE
- 4.1. Pannello Frontale
- 4.2. Pannello Posteriore
- 4.3. Terminologia
5. GUIDA OPERATIVA
- 5.1. Impostazione del Sistema
- 5.2. Impostazione DMX
- 5.3. Assegnazione PAN e TILT
- 5.4. Ripristino del Sistema
- 5.5. Copia di Scanner
- 5.6. Assegnazione del Tempo di Dissolvenza
6. GUIDA OPERATIVA
- 6.1. Modalità Manuale
- 6.2. Modifica delle Scene o delle Sequenze
7. PROGRAMMAZIONE
- 7.1. Entrare in Modalità di Programmazione
- 7.2. Creare una Scena
- 7.3. Eseguire un Programma
- 7.4. Controllare un programma
- 7.5. Modificare un Programma
- 7.6. Copiare una Banca
8. PROGRAMMAZIONE DI UNA CHASE
- 8.1. Creare una Sequenza
- 8.2. Eseguire una sequenza
- 8.3. Controllare una Sequenza
- 8.4. Modificare una Sequenza
- 8.5. Eliminare Tutte le Chase
9. PROGRAMMAZIONE DELLE SCENE
- 9.1. Inserire una Scena
- 9.2. Copiare una Scena
- 9.3. Eliminare una Scena
- 9.4. Eliminare Tutte le Scene
10. PLAYBACK
- 10.1. Esecuzione in Modalità Sound
- 10.2. Esecuzione in Modalità Automatica
- 10.3. Blackout
11. UTILIZZO DEL MIDI
12. APPENDICE
- 12.1. Introduzione DMX
- 12.2. Costruire una catena DMX
- 12.3. Terminatore DMX
- 12.4. Cavi DMX a 3 Piedini e 5 Piedini
13. SPECIFICHE
14. GARANZIA E ASSISTENZA
15. AVVISO

all channels (A) or Pan & Tilt only (P).

5. Press BLACKOUT and TAP SYNC/DISPLAY to save settings. All LEDS will blink

to conrm setting.

6. OPERATION

6.1. MANUAL MODE

Manual mode allows direct control of all scanners. You are able to move them and

change attributes by using the channel faders.

1. Press the AUTO/DEL button repeatedly until the MANUAL LED is lit.

2. Select a SCANNER button.

3. Move faders to change xture attributes.

4. PAGE SELECT A/B button: Use to switch between fader control of (A: Ch1~8),

(B: Ch 9~16).

5. TAP SYNC/DISPLAY button: Press to toggle the output indicator on LED dis-

play between DMX values (0-255) or percentage (0-100).

NOTES: All changes made while in Manual Mode are temporary and will not

be recorded.

6.2. REVIEW SCENE OR CHASE

This instruction assumes that you have already recorded scenes and chases on the con-

troller. Otherwise, please skip this section and go to programming.

SCENE Review

1. In manual mode, select one of the 23 banks by pressing the BANK UP/DOWN

buttons.

2. Select a SCENE button (1 to 8) to review.

3. Move the faders to change xture attributes.

CHASE Review

1. In manual mode, press any one of the 6 CHASE buttons.

2. Press TAP SYNC/DISPLAY button to view step number on display.

3. Press BANK UP/DOWN buttons to review all scenes in the chase.

ENGLISH

SCENEMAKER 1216 User manual