User Manual

7.3. Running a Program
1. Use BANK UP/DOWN buttons to change Program banks if necessary.
2. Press the AUTO/DEL button repeatedly until the AUTO LED turns on.
3. Adjust PROGRAM speed via the SPEED fader and the loop rate via the FADE
TIME fader.
4. Alternatively you can tap the TAP SYNC/DISPLAY button twice. Time between
two taps sets the time between SCENES (up to 10 minutes).
NOTE: De-select Blackout if LED is lit.
7.4. Check a Program
1. Press and hold PROGRAM button until its LED blinks.
2. Use BANK UP/DOWN buttons to select the PROGRAM bank to review.
3. Press the SCENES buttons to review each scene individually.
7.5. Editing a Program
Scenes will need to be modied manually.
1. Press and hold the PROGRAM button until the LED blinks.
2. Use BANK UP/DOWN buttons to change Program banks if necessary.
3. Select the desired xture via the SCANNERS button.
4. Adjust and change xture attributes using channel faders.
5. Press the MIDI/Add button to prepare the save.
6. Select the desired SCENES button to save.
NOTE: De-select Blackout if LED is lit.
7.6. Copy a Bank
1. Press and hold the PROGRAM button until the LED blinks.
2. Use BANK UP/DOWN buttons to select the PROGRAM bank you will copy.
3. Press MIDI/Add button to prepare the copy.
15
ENGLISH
SCENEMAKER 1216 User manual