User Manual

6. Use the BANK UP/DOWN button to locate the SCENE.
7. Press the SCENE button that corresponds to the scene to be inserted.
8. Press MIDI/Add button to insert the scene. All LEDs will blink.
9.2. Copy a Scene
1. Press and hold PROGRAM button to enter programming mode.
2. Select the BANK that contains the scene to be copied using the BANK UP/
DOWN buttons.
3. Press the SCENE button that corresponds to the scene to be copied.
4. Press MIDI/Add button to copy the scene.
5. Select the destination BANK that contains the scene memory to record onto using
the BANK UP/DOWN buttons.
6. Press the desired SCENE button to complete copy. All LEDs will blink.
9.3. Delete a Scene
1. Press and hold PROGRAM button to enter programming mode.
2. Select the BANK that contains the scene to be deleted by using BANK UP/
DOWN buttons.
NOTE: When deleting a scene the physical location is not removed, however,
all 192 DMX channels available to the scene will be set to value 0.
3. Press and hold the AUTO/DEL button.
4. Press the SCENE button that corresponds to the scene you want to delete. All
LEDs will blink.
9.4. Delete all Scenes
Turn off the console.
1. Press and hold PROGRAM button and BANK DOWN button while turning on
power to the controller.
CAUTION! This process is irreversible. All scenes with data will be set to 0.
19
ENGLISH
SCENEMAKER 1216 User manual