User Manual

ManualsBrandsSoundsation ManualsAudio EquipmentScenemaker 1216 - DMX512 LIGHTING CONTROLLER

Table Of Contents

1. 1. INTRODUCTION
- 1.1. UNPACKING
- 1.2. ACCESSORIES
2. OVERVIEW
3. MAIN FEATURES
4. OVERVIEW
- 4.1. Front Panel
- 4.2. Rear Panel
- 4.3. Common Terms
5. OPERATION GUIDE
- 5.1. Setting up the system
- 5.2. Fixture Addressing
- 5.3. PAN and TILT Assignment
- 5.4. Resetting the System
- 5.5. Copy Scanner
- 5.6. Fade Time Assign
6. OPERATION
- 6.1. MANUAL MODE
- 6.2. REVIEW SCENE OR CHASE
7. PROGRAMMING
- 7.1. Entering Program Mode
- 7.2. Create a Scene
- 7.3. Running a Program
- 7.4. Check a Program
- 7.5. Editing a Program
- 7.6. Copy a Bank
8. CHASE PROGRAMMING
- 8.1. Create a Chase
- 8.2. Running a Chase
- 8.3. Checking a Chase
- 8.4. Edit a Chase
- 8.5. Delete all CHASE Programs
9. SCENE PROGRAMMING (Steps)
- 9.1. Insert a Scene
- 9.2. Copy a Scene
- 9.3. Delete a Scene
- 9.4. Delete all Scenes
10. PLAYBACK
- 10.1. Running in Sound Mode
- 10.2. Running in Auto Mode
- 10.3. Blackout
11. MIDI OPERATION
12. APPENDIX
- 12.1. DMX Introduction
- 12.2. Building a Serial DMX Chain
- 12.3. DMX Terminator
- 12.4. 3-Pin vs 5-Pin DMX cables
13. SPECIFICATIONS
14. WARRANTY AND SERVICE
15. WARNING
1. INTRODUZIONE
- 1.1. DISIMBALLAGGIO
- 1.2. Accessori
2. PANORAMICA
3. CARATTERISTICHE PRINCIPALI
4. INTRODUZIONE
- 4.1. Pannello Frontale
- 4.2. Pannello Posteriore
- 4.3. Terminologia
5. GUIDA OPERATIVA
- 5.1. Impostazione del Sistema
- 5.2. Impostazione DMX
- 5.3. Assegnazione PAN e TILT
- 5.4. Ripristino del Sistema
- 5.5. Copia di Scanner
- 5.6. Assegnazione del Tempo di Dissolvenza
6. GUIDA OPERATIVA
- 6.1. Modalità Manuale
- 6.2. Modifica delle Scene o delle Sequenze
7. PROGRAMMAZIONE
- 7.1. Entrare in Modalità di Programmazione
- 7.2. Creare una Scena
- 7.3. Eseguire un Programma
- 7.4. Controllare un programma
- 7.5. Modificare un Programma
- 7.6. Copiare una Banca
8. PROGRAMMAZIONE DI UNA CHASE
- 8.1. Creare una Sequenza
- 8.2. Eseguire una sequenza
- 8.3. Controllare una Sequenza
- 8.4. Modificare una Sequenza
- 8.5. Eliminare Tutte le Chase
9. PROGRAMMAZIONE DELLE SCENE
- 9.1. Inserire una Scena
- 9.2. Copiare una Scena
- 9.3. Eliminare una Scena
- 9.4. Eliminare Tutte le Scene
10. PLAYBACK
- 10.1. Esecuzione in Modalità Sound
- 10.2. Esecuzione in Modalità Automatica
- 10.3. Blackout
11. UTILIZZO DEL MIDI
12. APPENDICE
- 12.1. Introduzione DMX
- 12.2. Costruire una catena DMX
- 12.3. Terminatore DMX
- 12.4. Cavi DMX a 3 Piedini e 5 Piedini
13. SPECIFICHE
14. GARANZIA E ASSISTENZA
15. AVVISO

10. PLAYBACK

10.1. Running in Sound Mode

1. Press MUSIC/BANK COPY button until MUSIC LED turns on.

NOTE: In the Sound mode, programs will be triggered by the sound using its

built-in microphone.

2. Select the program BANK to run in sound active mode using the BANK UP/

DOWN buttons.

3. Alternatively you can press a single CHASE button (1 - 6) or several CHASE but-

tons in sequence and all selected chases will loop in the selected order.

NOTE: Multiple chases selected will loop and run in the order originally se-

lected.

4. You can adjust the duration time using FADE TIME fader.

10.2. Running in Auto Mode

1. Press AUTO/DEL button until AUTO LED turns on.

NOTE: In the Auto mode, programs will be triggered by controllers fade and

speed time as set on the faders.

2. If a CHASE button is not pressed the controller will automatically run a BANK

program.

3. Change BANK programs by using BANK UP/DOWN buttons.

4. Alternatively you can press a single CHASE button (1 - 6) or several CHASE but-

tons in sequence and all selected chases will loop in the order selected.

NOTE: Multiple chases selected will loop and run in the order originally se-

lected.

5. You can adjust the time between steps by moving SPEED fader and the duration

of the step by moving FADE TIME fader.

10.3. Blackout

1. Blackout button brings all lighting output to 0 or off.

ENGLISH

SCENEMAKER 1216 User manual