Input / 8 Outputs DMX Distributor USER MANUAL MANUALE utente Please read this manual carefully and proper take care of this manual.
Dear customer, First of all thanks for purchasing a SOUNDSATION® product. Our mission is to satisfy all possible needs of musical instrument, professional audio and lighting users offering a wide range of products using the latest technologies. We hope you will be satisfied with this item and, if you want to collaborate, we are looking for a feedback from you about the operation of the product and possible improvements to introduce in the next future. Go to our website www.soundsationmusic.
ENGLISH SCENEsplit 8 rack User manual IMPORTANT SAFETY SYMBOLS The symbol is used to indicate that some hazardous live terminals are involved within this apparatus, even under the normal operating conditions, which may be sufficient to constitute the risk of electric shock or death. The symbol is used in the service documentation to indicate that specific component shall be replaced only by the component specified in that documentation for safety reasons.
ENGLISH Scenesplit 8 Rack User manual install according to the manufacturer’s instructions. Object and Liquid Entry Objects do not fall into and liquids are not spilled into the inside of the apparatus for safety. Power Cord and Plug Protect power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Do not defeat the safety purpose of the polarized or grounding-type plug.
ENGLISH SCENEsplit 8 rack User manual 1. 1. INTRODUCTION Thank you for purchasing our SCENESPLIT 8 RACK.
ENGLISH Scenesplit 8 Rack User manual 2. POWER ON LED: When the unit is on it is lit. 1 2 3 4 5 6 7 3. LINK OUT / Termination switch: When unpressed, LINK OUT is available to route DMX data from DMX Input. When pressed it terminates DMX Link Output and it can’t be used to get DMX data. 4. DMX Line Output: It routes all DMX data from DMX Input connector. It can be terminated by pressing switch n.3. 5.
ENGLISH SCENEsplit 8 rack User manual 4. DMX CONNECTION There are 512 channels in a DMX-512 connection. Channels may be assigned in any manner. A fixture capable of receiving DMX 512 will require one or a number of sequential channels. The user must assign a starting address on the fixture that indicates the first channel reserved in the controller. There are many different types of DMX controllable fixtures and they all may vary in the total number of channels required.
ENGLISH Scenesplit 8 Rack User manual on one output channel. Connect fixtures using shielded 2-conductor twisted pair cable with 3-pin XLR male to female connectors. The shield connection is pin 1, while pin 2 is Data Negative (S-), and pin 3 is Data positive (S+). DMX use of 3-Pin XLR Connectors INPUT 3-Pin XLR Pin 1: GND Pin 2: DMX Pin 3: DMX + OUTPUT CAUTION: Wires must not come into contact with each other; otherwise the fixtures will not work at all, or will not work properly. 4.2.
ENGLISH SCENEsplit 8 rack User manual 5. SPECIFICATIONS Power Input Fuse Protocols Data Input/Outputs Data Pin Configuration Distributor Size (WxHxD): Net Weight Packing Dimension (WxHxD): Packing Gross Weight: AC88 ~ 256Vac 50/60Hz. F1A - 250V DMX-512 3-pin XLR male (In) female (out) sockets Pin 1 shield, Pin 2 (-), Pin 3 (+) 482 x 46 x 118 mm 1.35 kg 610 x 95 x 160 mm 1.
ENGLISH Scenesplit 8 Rack User manual 6. WARRANTY AND SERVICE All SOUNDSATION products feature a limited two-year warranty. This two-year warranty is specific to the date of purchase as shown on your purchase receipt.
This product is imported in EU by Questo prodotto viene importato nella UE da FRENEXPORT SPA – Via Enzo Ferrari, 10 - 62017 Porto Recanati - Italy www.soundsationmusic.
www.soundsationmusic.com Ver 1.
