User Manual

Special
Motor Reset PAN
ENTER
UP / DOWN
TILT
COLOR
GOBO1
GOBO2
FOCUS
PRISM1
PRISM2
Error Stats
PAN
TILT
COLOR
GOBO1
GOBO2
FOCUS
PRISM1
PRISM2
Motor Adjust PAN
TILT
COLOR
GOBO1
GOBO2
FOCUS
PRISM1
PRISM2
P/T Correct YES
NO
Fan Mode AUTO
ON
6. OVERHEAD RIGGING
WARNING: The installation must be carried out by qualied service personal
only. Improper installation can result in serious injuries and /or damage to
property. Overhead rigging required extensive experience! Working load
limits should be respected, Certied installation materials should be used,
the installed device should be inspected regularly for safety.
• Make sure the area below the installation place is free from unwanted persons
during rigging, de -rigging and servicing.
• Locate the xture in a well ventilated spot, far away from any ammable materials
and/or liquids. The xture must be xed at least 50cm from surrounding walls.
• The device should be installed out of reach of people and outside areas where
persons may walk by or be seated.
• Before rigging, make sure that the installation area can hold minimum point load
of 10 times the device”s weight. The device should be well xed; a free swinging
mounting is dangerous and may not be considered!
• Do not cover any ventilation opening as this may result in overheating
10
ENGLISH
TWILIGHT 180 BEAM User manual