User Manual
The TWILIGHT 60 ENDLESS is installed with overheating protection device, when it is
overheat, the overheating protection device will automatically cut off power supply.
Please check whether the fan is running, whether the fan and fan nets have dust jam,
nd troubleshooting before working. But note that a qualied technicians can do the
repair work.
In order to maintain the gobo wheel smooth rotation and smooth movement, it is sug-
gested to add grease for the rotation gobo wheel every two months. Should use good
quality grease.
In order to ensure the xture working well, maintain the cleanness of xture is very
necessary. It should be clean once every 30 days after cooling the fans. Internal and
external optical lens, reector and coating color lter cleaning must be carried out
periodically to optimize the output light efciency. Do not use any contains chemical
solvent cleaning coating color lter. Cleaning the xture depending on the operating
frequency of xture and the surrounding environment. Clean with a soft cloth and
cleaning products for glass, suggest to clean the external optical system at least once
every 30 days , clean the internal optical system at least once every 30/60 days. Please
do not use alcohol and other organic solvents to wipe housing, lest cause damage.
12. SPECIFICATIONS
Light emitting source 1x60W RGBW 4in1 LED
Beam intensity: 30.000 Lux @ 1m
Beam angle 4°
Dimmer/Strobe Dimmer variable electronic dimmer (0-100%), 0-20Hz
PAN/TILT Pan: 540°, Tilt: 270°, with endless option
Working modes Stand-alone mode, DMX mode, Master/Slave synchronization mode
DMX Control 14CH / 16CH modes
Housing High temperature resistant engineering plastic + aluminum alloy
Voltage 100-240V,50-60Hz
Fuse T3A-250V, 5x20mm
Power consumption 115W
Fixture Size (LxHxD) 170 x 262 x 202 mm
Fixture Weight 3.3kg
Carton Size (LxHxD) 295 x 205 x 250mm
Carton Weight 4.5kg
13
ENGLISH
TWILIGHT 60 ENDLESS User manual