User Manual
f Pull out the two antennas (17) and (18), make them to be perpendicular with the
receiver.
f Connect the supplied power adapter to the DC power supply socket (24).
f Connect balanced audio outputs A (22) and B (23) or the unbalanced/mix output (19,
20, 21) to your mixer or sound system, using the appropriate cables (see section "11.
AUDIO CONNECTIONS" at page 18 for further details).
f Turn on the receiver by pressing POWER button (1). LCD (6) will light up showing
current settings of the system.
8. SYSTEM SETUP
Please notice that when you switch the receiver on LOCK function ( ) is active on both
Channels. Hold for a few seconds SET button A (4) or SET button B (7) to unlock and
have access to parameters. The icon will change into
.
NOTE: In addition to the active LOCK function, at power on the receiver is
even muted (
icon is on in the display) until you turn on the transmitter and
align it on the same receiver’s channel.
8.1. Channel Setup Mode
Group Setting
660.00
f Long press LOCK key to unlock the system, select the GR tag by UP/DOWN key, press
enter key to conrm, then choose the group by UP/DOWN key, press enter key to
conrm, then SYNC by IR key.
11
ENGLISH
WF-U2600 User manual