User Manual

1. Sound Receiving Head: It protects microphone capsule. Never remove it to pre-

vent damage to the internal parts of the microphone.

2. LCD Display: This back-lit display shows all important information related to set-

tings, as well as battery charge level.

NOTE: After about 5 seconds back-light is lowered, reducing battery con-

sumption. Full lighting returns each time you press Power button.

3. IR Window: During IR mode, bring this part of the transmitter close to the receiv-

er’s IR sensor to complete the operation.

4. ON/OFF button: Press and hold this button for about 2 seconds to turn on or off

the microphone.

5. Battery Slot: Insert two 1.5V AA-Type batteries, paying attention to correct polari-

ty (indicated on bottom of this battery compartment).

6. Mic Tail: Remove this cover to access the battery-compartment and insert or

replace the batteries.

9.1. Handheld Microphone LCD Display

660.00

Sync signal

GROUP Group

Channel

HI means high power, apply to long distance

LO means low power apply to room use

IR means sync signal

Indicates Group n. 8, channel n. 1

Battery status. When ashing means low power

When on, it indicates that smart Mute is active

Mute status, no voice. Slightly shaking can relieve it. Or a

quick press on ON/OFF button can switch between mute and

work status.

660.00

Smart mute function is opened. When falling down or no

using, will automatically mute.

ENGLISH

WF-U2600 User manual