User Manual

Table Of Contents

ATTENTION: Operating distance between microphone grill and mouth must

be less than 15cm

f Avoid direct the microphone toward a speaker to avoid Larsen effect, which could

damage your audio system.

10. POCKET TRANSMITTER AND HEADSET

1. Microphone: WF-U2300HP and PP systems

feature, respectively, 1 and 2 headset micro-

phone with professional condenser dynamic

capsules.

2. Microphone Input: Plug here the headset

audio connector. Please notice that this con-

nector is equipped with security threads, to

prevent it from coming off during use.

3. Volume: Adjust the audio input level of

the transmitter. Use this knob to adapt

microphone signal level in order to prevent

distorted sound.

4. POWER Button: This selector has 3 posi-

tions. When it’s all to the OFF position, the

microphone is turned off; when it is in the central position, the microphone is ac-

tive but the audio is disabled; nally, when it’s all to ON position, the microphone is

working and the audio is active.

NOTE: Standby central position allows the unit to transmit without audio.

This option is important to prevent interference in the receiver due to the

absence of a radio transmitting signal. It is, therefore, suggested to ALWAYS

use this standby position when you temporarily don’t sing or play but the

wireless microphone is connected to an audio system (e.g. during a pause in

a show). You can move the switch to OFF position (all down) only when you

are sure that the sound system volume is low.

5. Power LED: It lights up when the transmitter is on.

UP SE T DOW N

WF-U2300

ENGLISH

WF-U2300 User manual