User Manual

MHz
.
A
F
R
F
iR
FREQ UE NC Y
CHAN NE L
POW
HI
VOL
MHz
A
F
R
F
iR
FREQ UE NC Y
CHAN NE L
POW
HI
VOL
f Press the UP or DOWN buttons to search for free frequencies.
Channel number will increase (if you press UP) or decrease (if you press DOWN) until
the rst free frequency is reached. Auto Research icon ashes.
f Once the frequency is reached, press SET button to move to next step and send
channel information via IR (ACT function, see next section).
NOTE: If you do not press any buttons for about 10 seconds, the automatic
search icon goes off and the system returns to channel setting mode. If, after
the receiver is back to channel setting mode (
CHANNEL
icon is ashing) you do
not press any button for other 10 seconds, the system automatically returns
to mode.
8.3. ACT Function
The WF-U2300 comes with an infrared transmission system between receiver and trans-
mitter, called ACT function, which easily sends all settings to your hand-held or pocket
transmitter. To activate the ACT function:
f Turn on the receiver and hold for a few seconds SET key to unlock it. icon will turn
off.
f Press UP or DOWN to manually increase or decrease channel number or press SET
again to enter the Auto Search Mode (in the latter case, press UP or DOWN again to
search for the rst free frequency).
f Press and hold for about 2 seconds SET key again to enter ACT mode and transmit
all channel information to the transmitter. iR icon will ash for about 10 seconds.
I
R
MHz
.
MH
z
.
AF
RF
iR
FREQU
ENC
Y
C
HAN
NEL
AF
RF
iR
FR
EQU
EN
C
Y
CH
AN
N
EL
POW
HI
VOL
POW
H
I
VOL
f Bring the hand-held or pocket transmitter as close as possible to the receiver’s IR
12
ENGLISH
WF-U2300 User manual