User Manual
Table Of Contents
- 1. UNPACKING
- 2. ACCESSORIES
- 3. OVERVIEW
- 4. MAIN FEATURES
- 5. RECEIVER CONTROL AND FUNCTIONS
- 6. RECEIVER INSTALLATION
- 7. SYSTEM SETUP
- 8. HAND-HELD MICROPHONE
- 9. POCKET TRANSMITTER AND HEADSET
- 10. AUDIO CONNECTIONS
- 11. WF-RACK KIT1 AND KIT2
- 12. SPECIFICATIONS
- 13. FREQUENCY TABLE
- 14. WARRANTY AND SERVICE
- 15. WARNING
- 17. DISIMBALLAGGIO
- 18. ACCESSORI
- 19. INTRODUZIONE
- 20. CARATTERISTICHE
- 21. CONTROLLI E FUNZIONI DEL RICEVITORE
- 22. INSTALLAZIONE DEL RICEVITORE
- 23. SETUP DEL SISTEMA
- 24. MICROFONO PALMARE
- 25. TRASMETTITORE TASCABILE
- 26. CONNESSIONI AUDIO
- 27. WF-RACK KIT1 E KIT2
- 28. SPECIFICHE
- 29. TABELLA DELLE FREQUENZE
- 30. GARANZIA E ASSISTENZA
- 31. AVVISO
- 32. DECLARATION OF CONFORMITY
1. Grille: It protects microphone capsule. Never remove it to prevent damage to the
internal parts of the microphone.
2. LCD Display: This back-lit display shows all important information related to set-
tings, as well as battery charge level.
NOTE: After about 5 seconds back-light is lowered, reducing battery con-
sumption. Full lighting returns each time you press Power button.
3. ACT Window: During ACT mode, bring this part of the transmitter close to the
receiver’s IR sensor to complete the operation.
4. Power button: Press and hold this button for about 2 seconds to turn on or off the
microphone.
5. Battery Slot: Insert two 1.5V AA-Type batteries, paying attention to correct polari-
ty (indicated on bottom of this battery compartment).
6. Battery Slot Cover: Remove this cover to access the battery-compartment and
insert or replace the batteries.
9.1. Hand-held Microphone Using Technique
f Don’t hold the microphone grill.
f Avoid holding the microphone on antenna position.
f Don’t hold two microphones together
14
ENGLISH
WF-U2300 User manual