User Manual
Table Of Contents
- 1. UNPACKING
- 2. ACCESSORIES
- 3. OVERVIEW
- 4. MAIN FEATURES
- 5. RECEIVER CONTROL AND FUNCTIONS
- 6. RECEIVER INSTALLATION
- 7. SYSTEM SETUP
- 8. HAND-HELD MICROPHONE
- 9. POCKET TRANSMITTER AND HEADSET
- 10. AUDIO CONNECTIONS
- 11. WF-RACK KIT1 AND KIT2
- 12. SPECIFICATIONS
- 13. FREQUENCY TABLE
- 14. WARRANTY AND SERVICE
- 15. WARNING
- 17. DISIMBALLAGGIO
- 18. ACCESSORI
- 19. INTRODUZIONE
- 20. CARATTERISTICHE
- 21. CONTROLLI E FUNZIONI DEL RICEVITORE
- 22. INSTALLAZIONE DEL RICEVITORE
- 23. SETUP DEL SISTEMA
- 24. MICROFONO PALMARE
- 25. TRASMETTITORE TASCABILE
- 26. CONNESSIONI AUDIO
- 27. WF-RACK KIT1 E KIT2
- 28. SPECIFICHE
- 29. TABELLA DELLE FREQUENZE
- 30. GARANZIA E ASSISTENZA
- 31. AVVISO
- 32. DECLARATION OF CONFORMITY
You can, of course, connect even unbalanced equipment to balanced outputs. Use ei-
ther mono and stereo jack, making sure ring and collar are connected together (or pins
1 & 3 in the case of XLR connectors).
Unbalanced use of 1/4” jack TS connector
Strain relief
clamp
Sleeve
Tip
Sleeve
Ground shield
Tip
Signal
12. WF-RACK KIT1 AND KIT2
WF-U2300 series receiver units can be mounted in 19” standard rack units using op-
tional kits (contact your dealer or go to www.soundsationmusic.com for more details)
to adapt the receiver to any 19” rack. Two different kits are available:
f WF-RACK KIT1: To set one WF-U2300 series receiver in one 19” rack unit.
WF-U2300
UP
set
down
UP
set
down
ir
f WF-RACK KIT2: To set two WF-U2300 series receivers in two 19” rack units.
WF-U2300
UP
set
down
UP
set
down
ir
WF-U2300
UP
set
down
UP
set
down
ir
12.1. WF-RACK KIT1
The kit includes:
C
A. 2x ¼ rack unit adapter
B. 2x Extension cables for Antenna
C. 4x Screws to fasten the receiver to the two rack adapters
17
ENGLISH
WF-U2300 User manual