User Manual
Table Of Contents
- 1. UNPACKING
- 2. ACCESSORIES
- 3. OVERVIEW
- 4. MAIN FEATURES
- 5. RECEIVER CONTROL AND FUNCTIONS
- 6. RECEIVER INSTALLATION
- 7. SYSTEM SETUP
- 8. HAND-HELD MICROPHONE
- 9. POCKET TRANSMITTER AND HEADSET
- 10. AUDIO CONNECTIONS
- 11. WF-RACK KIT1 AND KIT2
- 12. SPECIFICATIONS
- 13. FREQUENCY TABLE
- 14. WARRANTY AND SERVICE
- 15. WARNING
- 17. DISIMBALLAGGIO
- 18. ACCESSORI
- 19. INTRODUZIONE
- 20. CARATTERISTICHE
- 21. CONTROLLI E FUNZIONI DEL RICEVITORE
- 22. INSTALLAZIONE DEL RICEVITORE
- 23. SETUP DEL SISTEMA
- 24. MICROFONO PALMARE
- 25. TRASMETTITORE TASCABILE
- 26. CONNESSIONI AUDIO
- 27. WF-RACK KIT1 E KIT2
- 28. SPECIFICHE
- 29. TABELLA DELLE FREQUENZE
- 30. GARANZIA E ASSISTENZA
- 31. AVVISO
- 32. DECLARATION OF CONFORMITY
NOTE: The kit doesn’t include screws to fasten the whole block (receiver and
adapters) to the 19” rack chassis.
12.2. WF-RACK KIT1 Assembling
1
2
4
3
5
1. Remove the two plastic parts on each of the two sides of the receiver.
2. Place the A adapter so that the two lateral holes match those on the receiver side.
3. Fasten the adapter using two screws as shown in the following picture.
4. Repeat steps 1 to 3 of this section on the other side of the receiver.
5. Unscrew the two rear antennas and insert extension cables supplied with the kit.
Then attach the other end to the panel in order to place the antennas outside the
rack. The same operation must be performed for both antennas.
12.3. WF-RACK KIT2
The kit includes:
A
B C D
E
A. 1x 19” rack panel
B. 2x Lateral brackets
18
ENGLISH
WF-U2300 User manual