User Manual
Table Of Contents
- 1. UNPACKING
- 2. ACCESSORIES
- 3. OVERVIEW
- 4. MAIN FEATURES
- 5. RECEIVER CONTROL AND FUNCTIONS
- 6. RECEIVER INSTALLATION
- 7. SYSTEM SETUP
- 8. HAND-HELD MICROPHONE
- 9. POCKET TRANSMITTER AND HEADSET
- 10. AUDIO CONNECTIONS
- 11. WF-RACK KIT1 AND KIT2
- 12. SPECIFICATIONS
- 13. FREQUENCY TABLE
- 14. WARRANTY AND SERVICE
- 15. WARNING
- 17. DISIMBALLAGGIO
- 18. ACCESSORI
- 19. INTRODUZIONE
- 20. CARATTERISTICHE
- 21. CONTROLLI E FUNZIONI DEL RICEVITORE
- 22. INSTALLAZIONE DEL RICEVITORE
- 23. SETUP DEL SISTEMA
- 24. MICROFONO PALMARE
- 25. TRASMETTITORE TASCABILE
- 26. CONNESSIONI AUDIO
- 27. WF-RACK KIT1 E KIT2
- 28. SPECIFICHE
- 29. TABELLA DELLE FREQUENZE
- 30. GARANZIA E ASSISTENZA
- 31. AVVISO
- 32. DECLARATION OF CONFORMITY
C. 4x Receiver’s coupling brackets
D. 4x Extension cables for Antenna
E. 12x Screws to fasten the two receiver each other and then to the rack adapters
NOTE: The kit doesn’t include screws to fasten the whole block (receiver and
adapters) to the 19” rack chassis.
12.4. WF-RACK KIT2 Assembling
1. Remove the 4 plastic parts on two sides of the receivers.
2. Place the two receivers so that the holes on the upper and lower part coincide as
shown in previous picture and attach one coupling bracket on the top and one on
the bottom of the receivers using the supplied screws.
3. Place the lateral brackets respectively on the left and right side of the two connect-
ed receivers using the supplied screws.
4. Unscrew the four antennas and insert extension cables supplied with the kit. Then
attach the other end to the rack panel as shown in the picture.
1
3
3
4
2
19
ENGLISH
WF-U2300 User manual