User Manual

f When the display shows F-00 - F-08, you can adjust Strobe Speed.
Audio mode
Under this mode, please adjust the Audio Sensitivity control knob on rear panel to a
suitable position. There are 4 modes, from SP00 to SP03, as you increase the value the
sound mode will increase and change.
Foot Switch mode
There are 20 modes that can be selected. AP01-AP12 are single internal auto programs;
ALL means that these 12 internal programs run constantly.
8. DMX Channel Chart
Several operating modes were preprogrammed into this LED Kit at DMX Channel 1.
Before controlling other DMX channels, please be sure that channel 1 is set in proper
mode (value).
Channels Function Value Description
CH1
Mode 1 000 - 009 RGB color adjustment
Mode 2 010 - 029 Internal Program 1
Mode 3 030 - 049 Internal Program 2
Mode 4 050 - 069 Internal Program 3
Mode 5 070 - 089 Internal Program 4
Mode 6 090 - 109 Internal Program 5
Mode 7 110 - 129 Internal Program 6
Mode 8 130 - 149 Internal Program 7
Mode 9 150 - 169 Internal Program 8
Mode 10 170 - 189 Internal Program 9
Mode 11 190 - 209 Internal Program 10
Mode 12 210 - 229 Internal Program 11
Mode 13 230 - 249 Internal Program 12
Mode 14 250 - 255 4 kinds of Audio Mode Options
NOTE: to operate CH1, CH3 must have a speed value set
Other Channels:
Channels Function Value Description
CH2 Dimmer 0 - 100% 000 - 255 RGB Brightness 0-100%
CH3
Strobe Speed /
Chase Speed
000 - 015 No Strobe
016 - 255 Strobe Speed adjustment
CH4 Red Dimmer 000 - 255 1st PAR Red Adjustment 0 - 100%
CH5 Green Dimmer 000 - 255 1st PAR Green Adjustment 0 - 100%
CH6 Blue Dimmer 000 - 255 1st PAR Blue Adjustment 0 - 100%
CH7 Red Dimmer 000 - 255 2nd PAR Red Adjustment 0 - 100%
CH8 Green Dimmer 000 - 255 2nd PAR Green Adjustment 0 - 100%
11
ENGLISH
4LEDKIT-PARTY User manual