User Manual

120ohm, 1/4W
resistor
DMX Terminator
Complimentary signal cable can transmits signals to 20 unit xtures at most.
Signal amplier is a must to connect more xtures.
12.2. 3-Pin vs 5-Pin DMX cables
DMX connection protocols used by controllers and xtures manufacturers are not stan-
dardized around the world. However, two are the most common standards: 5-Pin XLR
and 3-Pin XLR system. If you wish to connect SCENESPLIT 8 RACK to a 5-Pin XLR input
xture, you need to use an adapter-cable or make it by yourself.
Following the wiring correspondence between 3-Pin and 5-Pin plug and socket stan-
dards
5-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
13. SPECIFICATIONS
General:
Portable system of four lights, comprising of
81 LEDs
LED per single PAR:
27 red 625nm/100mW
27 green 525nm/120mW
27 blue 465nm/120mW
Beam angle: 16° (per PAR)
Field angle: 26° (per PAR)
DMX Channels: 3, 15CH
AC power: 100V-240V 50/60Hz Switching Power Supply
Power Consumption: 30W
Fuse: 1.6A
Power Linking: 30pcs@240V, 15pcs@110V
Size: 910 x 242 x 48 mm
Packing (LxHxW): 1180 x 125 x 350 mm
G.W: 10 kg
15
ENGLISH
4LEDKIT-PARTY User manual