User Manual

In addition to RGB color adjustment of all four PARs independently, the unit features
12 auto running programs and 4 Audio Mode Options, to let your lighting kit create
wonderful effects even without a DMX controller.
3. MAIN FEATURES
f 4 PARs with 81 high-brightness LED each (27R, 27G, 27B)
f T-Bar with internal controller and power unit (carrying bag included)
f Tripod Stand with carrying bag included
f Operation Modes: Auto, Sound, DMX, Footswitch modes
f 12 Internal Programs
f DMX: 15CH mode or 3CH basic mode (only RGB control on all PARs)
f 4 kinds of Audio Mode with internal Microphone and sensitivity adjustment
f Beam Angle: 16° (per PAR)
f Field Angle: 26° (per PAR)
f LED Display for easy navigation and programming
f Pedalboard with 2 footswitch
4. OVERHEAD RIGGING
WARNING: The installation must be carried out by qualied service personal
only. Improper installation can result in serious injuries and /or damage to
property. Overhead rigging required extensive experience! Working load
limits should be respected, Certied installation materials should be used,
the installed device should be inspected regularly for safety.
• Make sure the area below the installation place is free from unwanted persons
during rigging, de -rigging and servicing.
• Locate the xture in a well ventilated spot, far away from any ammable materials
and/or liquids. The xture must be xed at least 50cm from surrounding walls.
• The device should be installed out of reach of people and outside areas where
persons may walk by or be seated.
• Before rigging, make sure that the installation area can hold minimum point load
of 10 times the device”s weight. The device should be well xed; a free swinging
mounting is dangerous and may not be considered!
• Do not cover any ventilation opening as this may result in overheating
• Before the rst time use, it must be inspected by professional staff to make sure
safety, inspection regularly every year.
7
ENGLISH
4LEDKIT-PARTY User manual