User Manual
Table Of Contents
- 1. 1. INTRODUCTION
- 2. OVERVIEW
- 3. MAIN FEATURES
- 4. OVERHEAD RIGGING
- 5. OVERVIEW
- 6. FUNCTION
- 7. MODE INTRODUCTION
- 8. DMX Channel Chart
- 9. MAINS CONNECTIONS
- 10. WORKING MODE OPTIONS
- 11. TROUBLE SHOOTING
- 12. APPENDIX
- 13. SPECIFICATIONS
- 14. WARRANTY AND SERVICE
- 15. WARNING
- 16. 1. INTRODUZIONE
- 17. PANORAMICA
- 18. CARATTERISTICHE PRINCIPALI
- 19. MODALITÀ DI INSTALLAZIONE
- 20. INTRODUZIONE
- 21. FUNZIONI
- 22. MODALITÀ DI FUNZIONAMENTO
- 23. TABELLA DMX
- 24. COLLEGAMENTI PRINCIPALI
- 25. MODALITÀ OPERATIVE
- 26. APPENDICE
- 27. RISOLUZIONE DEI PROBLEMI
- 28. SPECIFICHE
- 29. GARANZIA E ASSISTENZA
- 30. AVVISO
5. OVERVIEW
1. POWER: Main input and output with IEC socket and integrated fuse holder. Con-
nect here the supplied mains cable and any next light.
2. SENSITIVITY: This knob is used to adjust music input sensitivity.
3. MICROPHONE: Turn the knob to adjust sound activated sensitivity.
4. DMX INPUT: 3PIN male XLR connector for DMX communication.
5. DMX OUTPUT: 3PIN female XLR connection for DMX communication.
6. LED DISPLAY: It shows all menus and functions.
7. MENU: Used to select Pod different menu items.
8. UP: To go up in the menu and to increase values shown on the display.
9. DOWN: To go back in the menu and to lower values shown on the display.
10. ENTER: Used to conrm your choice.
11. PAR LED CONNECTORS: Connect LED PARs here.
12. CABLE: Special cables with LED power signal for passive LED panels.
13. FOOTSWITCH CONNECTOR: Connect here the supplied pedalboard.
14. PANELS: Passive LED PARs.
15. ADJUSTMENT: PARs’ Pan Tilt adjustment brackets with fastening knobs.
16. STAND CONNECTOR: It is a Ø36mm connecting bracket to put the T-bar on the
8
ENGLISH
4LEDKIT-PARTY User manual