OMEGA-330 TEXT 330mW Text Laser System with RGB Graphic Effects USER MANUAL Please read this manual carefully and proper take care of this manual.
Dear customer, First of all thanks for purchasing a SOUNDSATION® product. Our mission is to satisfy all possible needs of musical instrument, professional audio and lighting users offering a wide range of products using the latest technologies. We hope you will be satisfied with this item and, if you want to collaborate, we are looking for a feedback from you about the operation of the product and possible improvements to introduce in the next future. Go to our website www.soundsationmusic.
ENGLISH OMEGA-330 TEXT User manual IMPORTANT SAFETY SYMBOLS The symbol is used to indicate that some hazardous live terminals are involved within this apparatus, even under the normal operating conditions, which may be sufficient to constitute the risk of electric shock or death. The symbol is used in the service documentation to indicate that specific component shall be replaced only by the component specified in that documentation for safety reasons.
ENGLISH OMEGA-330 TEXT User manual ff This product is for laser show only. The class 3B laser light should be operated by professional operator only. ff This is so-called show laser, emitting radiation with a wavelength spectrum between 400 and 700nm and producing lighting effects for shows. ff International laser safety regulations require that the vertical height from installment to ground is more than 3 meters, horizontal distance is 2.5 meters from audience.
ENGLISH OMEGA-330 TEXT User manual ff Heed all warning ff Follow all instructions Water / Moisture The apparatus should be protected from moisture and rain and can not be used near water; for example near a bathtub, a kitchen sink, a swimming pool, etc. Condensation To avoid condensation to be formed inside, allow this unit to adapt to the surrounding temperatures when bringing it into a warm room after transport.
ENGLISH OMEGA-330 TEXT User manual and cleaning the unit. Improper electrical wiring may invalidate the product warranty. To avoid electric shock, all fixtures must be connected to circuits with a suitable ground. Do not power on and power off the fixture in a short time. DMX connection When use DMX controller, please make sure that there is no interference sources (e.g. intercom, high frequency radio waves and radiation source). Cleaning Clean only with a dry cloth.
ENGLISH OMEGA-330 TEXT User manual 1.2. ACCESSORIES SOUNDSATION can supply a wide range of quality accessories that you can use with your OMEGA-330 TEXT laser, like Cables, Splitters, DMX controllers, and a wide range of fixtures. All products in our catalogue has been long tested with this device, so we recommend you to use Genuine SOUNDSATION Accessories and Parts. Ask your SOUNDSATION dealer or check out our website www.soundsationmusic.
ENGLISH OMEGA-330 TEXT User manual • Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing. • Locate the fixture in a well ventilated spot, far away from any flammable materials and/or liquids. The fixture must be fixed at least 50cm from surrounding walls. • The device should be installed out of reach of people and outside areas where persons may walk by or be seated.
ENGLISH OMEGA-330 TEXT User manual Wire correspondence is as follow: Cable (EU) Pin International Brown Blue Live Neutral L N Yellow/Green Earth The earth must to be connected! Pay attention to the safety! Before taking into operation for the first time, the installation has to be approved by an expert. 6. DMX CONNECTION DMX fixtures are designed to receive data through a serial Daisy Chain. A Daisy Chain connection is where the DATA OUT of one fixture connects to the DATA IN of the next fixture.
ENGLISH OMEGA-330 TEXT User manual 6.1. DMX Terminator DMX is a resilient communication protocol, however errors still occasionally occur. In order to prevent electrical noise from disturbing and corrupting the DMX control signals, a good habit is to connect DMX output of last fixture in the chain to a DMX terminator, especially over long signal cable runs.
ENGLISH OMEGA-330 TEXT User manual 5. MIC: Receiving sound signal. 6. Music LED: Indicated light of music signal when detected. 7. Handle: Used for hanging the light. IR MIC Min POWER Max SENSITIVITY MUSIC OMEGA-300 TEXT 330mw Text Laser System with RGB Graphic Effects 8. Key switch: Make sure the professional person use. 9. Urgent and safe switch: Switch off the laser manually if error occurs 10. DMX output: 3PIN Female XLR port, using for DMX 11.
ENGLISH OMEGA-330 TEXT User manual 8. MENU OPERATING INSTRUCTION When laser is powered on, LED display on rear panel shows the current operating standalone mode or DMX address of DMX mode. With help of LED control panel, is very easy to set and change the operating mode of laser. After every resetting and saving, the new mode information will be shown on the LED display at next power on. Mode Option, to choose the operating mode of laser or return to previous menu.
ENGLISH OMEGA-330 TEXT User manual 13
ENGLISH OMEGA-330 TEXT User manual 8.1. Initial Setting Auto/ Sound Programs Auto1-Auto9 Sound1Sound9 To choose program effect through UP/DOWN, ENTER to confirm Text Editing Mode TEXT Loop playback of saved TEX0-9 TEXTO-TEXT9 Text program 0-9, ENTER to play Smod (SHOW MODE) To choose time display mode Time Mode SETT (SETTING) Countdown Mode COUN DMX Mode d001 SLAVE Mode slav System setting ENTER into Countdown Mode To check DMX signal.
ENGLISH OMEGA-330 TEXT User manual 9. REMOTE CONTROLLER BUTTON FUNCTION ON/OFF Auto Sound Pause Left Right Time mode Countdown mode DESCRIPTION Power ON/OFF and black out. When it is pressed, enable laser light output, press again to blackout the laser, and circle as it. Press AUTO to enter Auto mode, it will play Auto show randomly. Press to change different programs. • Press MUSIC to enter Sound mode, it will play Auto show randomly. Press to change different programs.
ENGLISH OMEGA-330 TEXT User manual 10. KEYBOARD OPERATION Press WINDOWS button on the keyboard to enter menu option. Laser will show corresponding menu BUTTON FUNCTION DESCRIPTION Laser will show corresponding menu, press UP/DOWN to change below mode. Then save by pressing ENTER. 1 - AUTO 3 - TEXT 5 - COUNT DOWN 7 - SLAVE Menu option 2 - MUSIC 4 - CLOCK 6 - DMX 8 - SYSTEM 10.1. Keyboard operation instruction of AUTO mode Press WINDOWS button to enter menu.
ENGLISH 10.3. Keyboard operation instruction in TEXT mode Press WINDOWS button to enter menu. The OMEGA-330 TEXT will show corre- sponding menu. Press UP/DOWN mode. Keyboard Operation TEXT EDIT Pattern to choose 3 (TEXT). Press ENTER to run TEXT Old New Instruction F1 Flow Text flow setting, FLOW/STOP, press UP/DOWN to set flow speed. F2 Color Color setting, to choose different color. F3 Draw Draw setting, press UP/DOWN to set speed.
ENGLISH Keyboard Operation Old New ALT + NO. Play + No. Save text and text parameter, No. KEY means content saved on it. INS Loop Playback Display repeat setting, from the saved text. TEXT DISPLAY 10.4. Pattern Instruction Pg Up Choose last edited text, if one key without text, it will not display.
ENGLISH OMEGA-330 TEXT User manual Enters countdown mode. NO. is flicker, press 0-9 to set countdown second. 4 number countdown time is maximum, press ENTER to confirm. ENTER BACKSPACE COUNTDOWN SETTING Delete previous character. SPACE KEY Press SPACE KEY or PAUSE, timing and timing pause switch. PAUSE ESC Timing again TAB MIRROR Mirror, pattern cycle change at 4 kinds mirror direction, when arrive to chosen pattern, press stop key. F2 COLOR Choose different color effect. 11.
ENGLISH OMEGA-330 TEXT User manual PATTER GROUPS Channel CH2 Description First pattern group 032-063 Second pattern group 064-095 Third pattern group 096-127 Fourth pattern group 128-159 Fifth pattern group 160-191 Sixth pattern group 192-223 Seventh pattern group 224-255 Eighth pattern group Channel Value Description CH3 Pattern 000-255 Every 16 values for a pattern, total for 128 patterns 000-007 Built-in colors 008-015 R 016-023 G 024-031 R+G 032-039 B 040-047 R+B 048-
ENGLISH OMEGA-330 TEXT User manual 000-127 128 different fixed position on X axis 128-191 Clockwise rotation 192-255 Anticlockwise rotation 000-255 Fast to slow 000-127 128 different fixed position on X axis 128-191 Clockwise rotation 192-255 Anticlockwise rotation CH17 Movement Speed 000-255 Fast to slow CH18 Wave Size 000-255 Wave Size CH19 Wave Frequency 000-255 Wave Frequency 000-127 Wave Position 128-255 Movement Speed CH14 X Movement CH15 Movement Speed CH16 Y Movement CH20
ENGLISH OMEGA-330 TEXT User manual 13. WARRANTY AND SERVICE All SOUNDSATION products feature a limited two-year warranty. This two-year warranty is specific to the date of purchase as shown on your purchase receipt.
This product is imported in EU by Questo prodotto viene importato nella UE da FRENEXPORT SPA – Via Enzo Ferrari, 10 - 62017 Porto Recanati - Italy www.soundsationmusic.
www.soundsationmusic.com Ver 1.
